MAJORITY 1000002805 User manual

Box Contents
(https://www.majority.co.uk/wp-content/uploads/2022/04/Homerton-2-Whats-In-The-Box.jpg)
Controls and Functions
Front View
(https://www.majority.co.uk/wp-content/uploads/2022/04/Homerton-2-Front-View.png)
1. VOLUME+/- – Rotate to increase or decrease the volume level.
2. Press for power on and power off.
3. TUNE/OK – Fine-tune the station in FM mode. Press to select previous track/ next track in DAB mode.
Press to select or skip selection.
4. Remote sensor.
5. CD door
. Press to select previous track in CD/USB/FM/BT/Internet Radio mode.
7. Press to play and pause in CD, USB, BT and Internet radio.
. Press to select next track in CD/USB/DAB/FM/BT/Internet radio mode.
9. 1/2/3 – IN DAB/FM mode, press to select preset favourite stations. IN DAB/FM mode, long press to set
current station to favourite station. In CD mode, short press to select number 1/2/3. Press to change the

source.
10. Press to change the source.
11. MENU – Press to display the Menu.
12. EQ – Press to select sound characteristics: Normal/Jazz/Rock/Classic/Pop/My EQ
13. PRESET – Short press to call preset list.
14. INFO – Press to return to previous menu. Press to show the information in CD/ USB/DAB/FM and Internet
radio mode.
15. PAIR – Press and hold to activate the pairing function in Bluetooth or disconnect the existing paired
Bluetooth device.
1. AUDIO IN
17. USB / 5V 1A output – Connect to a USB device for music playback. Connect to recharge mobile device.
1. Headphone socket
19. DC IN
Back View
(https://www.majority.co.uk/wp-content/uploads/2022/04/Homerton-2-Back-View.jpg)
Remote Control

(https://www.majority.co.uk/wp-content/uploads/2022/04/Homerton-2-Remote-Control.jpg)
1. Turn the unit ON or in STANDBY mode.
2. CD /USB/DAB/FM/BT/PODCASTS/AUDIO – Press to select the corresponding AUDIO source.
(CD/USB/DAB/FM/BT/PODCASTS/AUDIO/INTERNET RADIO/SPOTIFY)
3. INTRO/AMS – Press to start browsing of all tracks in CD/USB. Press to automatically search for channel in
DAB and FM; when in searching, press again can stop it.
4. REPEAT – Press to select a repeat playback mode in CD/USB.
5. EQ – Press to select sound characteristics: Normal/Jazz/Rock/Classic/Pop/My EQ
. BASS+/- – Press to adjust the BASS in USER mode.
7. USER – Press to allow you to adjust the Bass and Treble in USER mode.
. MENU – Press to display the Menu.
9. Press to move up on the menu screen
10. OK/ – Press to play/pause in Bluetooth/CD/USB and Internet Radio. To select or skip to subsequent menu
in Bluetooth/CD/USB and Internet Radio.
11. Press and hold for fast backward in CD and USB. Press to select previous track in CD and USB. Press to
display the channel list in DAB, FM and Internet Radio. Press for ne tuning in FM. Press and hold for
manual tuning in FM.
12. Press to move down on the menu screen.
13. Press to stop playing in CD/USB Mode.
14. CLOCK – Press and hold to set clock.
15. P+/- – Press to skip the beginning of current/previous/subsequent album. Press to select previous/next
preset channel in FM and DAB.
1. 0-9 numeric
17. INFO – Press to show the information.
1. INTERNET RADIO/ SPOTIFY – Press to select the Internet Radio/Spotify.
19. SLEEP – Press to set sleep timer.
20. RANDOM – Press to play tracks randomly in CD.
21. TREBLE+/- – Press to adjust the TREBLE in USER mode.
22. PROGRAM – Press to program in CD/USB and preset channel in DAB, FM and Internet Radio.Long press
to save preset channels.
23. PAIR/ – Press to return to previous menu. Press and hold to activate the pairing function in Bluetooth or
disconnect the existing paired Bluetooth device.

g p
24. Press and hold for fast forward in CD and USB. Press to select the next track in CD and USB. Press to
display channel list in DAB/FM and Internet Radio. Press for ne tuning in FM. Press and hold for manual
tuning in FM.
25. Press to mute or resume the sound.
2. V+/- – Press to increase/ decrease the volume level.
27. TIMER – Press to set the Timer.
2. DIM – Select the brightness level of the display.
Instructions Guide
Operating your remote control
1. Press and slide the back cover to open the battery compartment of the remote control.
2. Insert two AAA size batteries. Make sure the (+) and (-) ends of the batteries match the (+) and (-) ends
indicated in the battery compartment.
3. Close the battery compartment cover.
Getting started / set up
Connect the unit to a suitable power source using the power supply provided. After showing a starting screen,
it will enter the last used listening mode. When the unit is started for the rst time, the setup wizard will be
launched automatically.
Get the network environment ready
Make sure you have setup the wireless network and you have the WEP, WPA or WPA2 security password to
activate the connection. You may also use the WPS (WiFi Protected Setup) function for easy pairing between
the network device and Homerton 2. Check if the light indicators on the network device are in appropriate
status.
Main menu
Under the main menu, you can select the following modes: Internet Radio, Podcasts, Spotify, Media Player
(USB), DAB, FM, Bluetooth®, CD, AUX-In, Sleep and Alarm.
System settings
When you rst operate the music system, you will be asked if you want to start the Setup Wizard. The Setup
wizard guides you through the basic setup parameters for Time/Date and Network connection. To change
any settings later, all setting functions are accessible from the Settings Menu.
If the setup wizard is terminated prematurely without a network setup, the device generates its
own WiFi access so that the device can be congured using the UNDOK APP.
Language
Select the desired menu language.
Product Privacy Policy
So that the installation can continue, please conrm the Privacy Policy with the”NAVIGATE / OK” button.
Setup wizard

Select “YES” to continue with the setup. If you select “NO”, the next display asks you whether the setup wizard
should be started the next time the device is switched on.
Time/Date Display format
Select 12hr or 24hr as the time format.
Auto Update
The time and date can be updated manually or automatically from DAB, FM or network.Auto update works
with data sent over DAB, FM or the Internet. The clock is only updated when it is in a corresponding mode, so
it is suggested to select a mode you use regularly. DAB and FM use time signals broadcast with radio
transmissions. Network uses a time signal sent from the Internet radio portal when in any network connected
mode.
Time Zone
Set your time zone. If your country uses daylight saving and it is in effect, turn on the Daylight saving option
(only available when Auto update from Internet is selected).
Manual update
If you set No update, the wizard prompts you to set the time and date manually. The date and time are
displayed as dd-mm-yyyy and hh:mm.
The active value appears as ashing. Adjust each value with the “NAVIGATE” knob. Once the value is set,
press the knob to continue setting with next value.
Network
Keep Network connected
Select this option when the unit’s network connection is in standby. When the function is conrmed, the unit
will quickly connect to the internet and it is possible to switch on the unit with the “UNDOK” app. The standby
power consumption is slightly increased with this function.
WLAN region
Select the WLAN region to obtain the optimal WLAN connectivity: Europe.
Scanning for the network
Homerton 2 is compatible with all common network protocols and encryption methods. It searches for the
available networks and list them out for you.
There will be hints for the type of network – if your network devices support WPS function, it will be [WPS]
before the SSID (the name of the network device). Select the one you want to connect.
For the wireless connection, you will be asked to input the encryption in the next step (WiFi only!). To enter the
network’s key, use the “NAVIGATE” knob to move the cursor through the characters and press “OK” to
conrm. As each character is selected, the key is built up near the top of the display.
There are three options accessible by tuning the navigate reel back before the rst characters – Backspace,
OK and Cancel.
WPS encrypted network
WPS encrypted networks are identied by WPS at the start of the network name when the Homerton 2
searches the available AP. Use one of the following methods of connection: There is the shortcut WPS key on
the unit.
Push button
Homerton 2 prompts you to press the connect button on the router. It then scans for a ready Push Button
Connect network and connects.
Pin
Homerton 2 generates an 8-digit code number which you enter into the wireless router, access point, or an
external registrar.

Skip WPS
Enter key as for a standard encrypted network.
For more information on setting up a WPS encrypted network, see your WPS router’s instructions.
Completion
Homerton 2 attempts to connect to the selected network. It will show connected if the setup is successful. If
connecting fails, Homerton 2 returns to a previous screen to try again.
Press “OK” to quit the setup wizard.
Equaliser
Network Wizard
Enter to search AP SSID, then input the WEP / WPA key or choose Push Button/Pin/SkipWPS to connect to
the wireless network.
PBC Wlan Setup
Push Button Conguration, it is to connect the AP that supports WPS (Wi-Fi ProtectedSetup).
View Settings
View the information of current connected network: Active connection, MAC address, WLAN region, DHCP,
SSID, IP address, Subnet mask, Gateway address, Primary DNS andSecondary DNS.
Manual Settings
Choose wireless network connection and enable or disable DHCP (Dynamic HostConguration Protocol).
Network Prole
Homerton 2 remembers the last four wireless networks it has connected to, and automatically tries to
connect to whichever one of them it can nd. From here you can seethe list of registered networks. You can
delete unwanted networks by turning and pressing then choosing YES to conrm delete.
Keep Network Connected
f you choose to keep network connected, the WiFi will not disconnect even you are in standby mode.
Otherwise, the connection will only be available in Internet Radio and MusicPlayer modes. This option allows
Homerton 2 to be ready forDLNA streaming in any operating modes.When Keep network connected is
selected the standby power consumption is raised.
Time/date
Set the time manually or automatically update, time format, time zone and daylight.
Brightness
You may change the backlight of each environment (Normal or standby) to High, Medium High, Medium,
Medium Low, Low or Off.
Language
Change it as your preference.
Software update
From time to time, software upgrades may be created with bug xes and/or additional features. You can
either check manually or set Homerton 2 to check periodically automatically (this is the default). If newer
available software is detected, you will be asked if you want to go ahead with an update. If you agree, the new
software is then downloaded and installed. After a software upgrade, all user settings are maintained.
NOTE: Before starting a software upgrade, ensure that Homerton 2 is plugged into a stable main
ti Di ti d i d tl d th it

power connection. Disconnecting power during an upgrade may permanently damage the unit.
Info
View the rmware version and the radio ID.
Internet radio
Homerton 2 can play thousands of radio stations and podcasts from around the world though a broadband
Internet connection.
When you select Internet radio, Homerton 2 directly contacts the Frontier Silicon Internet radio portal (which
is supported by Airable) to get a list of stations.
The portal also enables multiple lists of favourite stations that you can personalise. If you are already
listening to an Internet radio station, you can press “BACK” to quickly return to the last visited branch of the
menu tree, rather than “MENU” to go to the rst menu of Internet radio mode.
Last listened
When Internet radio mode restarts, the last-listened station is selected. To select another recently used
station, enter here to select the listed station. Most recent stations appear at the top of the list.
Station list
Browse Internet broadcasts that organised into different countries,Location, Popular and Discover. You can
also nd the station with Search by keyword.
Presets
To store an Internet radio preset, press and hold the “PROGRAM” key on Remote Control until the display
shows the “Save preset” screen. Select one of the 20 presets to save the current station and press “OK” to
conrm.To select a preset, press briey the “PRESET” button or “PROGRAM” on Remote Control, then select
one of the listed preset stations and press “OK” to conrm. Or press 0 to 9 on the Remote Control to directly
recall the presets.
Now Playing Information
While the stream is playing, the screen shows its name and description. To view further information, press
“INFO” button on the radio or Remote Control. Each time you press“INFO” button, another set of information
is displayed, cycle through name/description, genre/location, reliability, codec/sampling rate, playback buffer
and today’s date.
Spotify
Use your phone, tablet or computer as a remote control for Spotify.Go to spotify.com/connect to learn how
The Spotify Software is subject to third party licenses found here –https://www.spotify.com/connect/third-
party-licenses
USB
In USB mode, les in MP3 format can be played back from a USB storage device. You can use the forward or
back buttons to play the previous or next track. Press the “OK” button or use the “UNDOK APP” to start
playback.
REPEAT / SHUFFLE
You can play tracks repeatedly or in random order by pressing the “RANDOM” button on your remote control.
Press the “REPEAT” button to repeat the playlist or a song.
CD Mode

Improper operation can result in material damages!Do not insert any recording media that deviate from the
standard CD format (eg: mini-discs) into the CD player. These may not be played and ejected correctly. Insert
only one disc at a time into the CD player.
1. Press the source button on the unit and press forward until “CD” displayed, then press “OK” on the knob or
press the “CD” button on remote control to choose CD.
2. Put a disc (with printing side facing up) inside. The display will say “Loading” and the disc functions will
not work while the disc is loading. The Playback will begin automatically once the table of contents is
read. The display will show “No Disc” when the unit is set to CD mode and there is no CD inside.
To pause/resume playback of the CD, press the play button
To switch to the next track, press the forward button once
To fast forward through a track, press and hold the forwardbutton.
To switch to the previous track, press the back button twice
To fast backward through a track, press and hold back button.
To stop CD playback, press the stop button on the remote control.
CD Program
1. Set the unit in Stop mode.
2. Press the “PROGRAM” button on the Remote Control. The display will show “T01 P01”and “T01” ash.
3. Choose with back or forward or 0 to 9 on the Remote Control, the track which should be programmed and
conrm the track by pressing the “PROGRAM” button on the RemoteControl. The display changes to “P02”.
4. To choose more tracks do step 3 again.
5. If all tracks are programmed press the playbutton on the unit or Remote Control to start the programmed
playback.
Shue mode
Press the “RANDOM” button on the Remote Control. The display will show the Shue indicator.
Repeat one track
During playback press “REPEAT” on the Remote Control once to repeat playback of the song you are listening
to.
Repeat all tracks
During playback press “REPEAT” on the Remote Control twice to repeat all songs from the CD. To cancel the
Repeat mode press “REPEAT” on the Remote Control until all symbols in the display disappear.
This model does not support the 8cm disc. Do not insert this type of disc into the device to
prevent disc jam.
DAB
DAB mode receives DAB or DAB Plus digital radio signal and displays information about the station,
streaming audio and the program details.
Scanning for stations
The rst time you select DAB radio mode, or if the station list is empty, Homerton 2 automatically performs a
full scan to see what stations are available. You may also need to start a scan manually to update the list of
stations for one of the following reasons:
Available stations change from time to time.
If reception was not good for the original scan, this may result in an empty or incomplete list of available
stations.
If you have poor reception of some stations (burbling) you may wish to list only stations with good signal

If you have poor reception of some stations (burbling), you may wish to list only stations with good signal
strength.
To start a scan manually, choose Full scan. To scan only stations with good signal strength, select Local
scan.
Once the scan is complete, the radio shows a list of available stations. To remove stations that are listed but
not unavailable, choose Prune invalid.
Presets
To store an Internet radio preset, press and hold the “PROGRAM” on Remote Control until the display shows
the “Save preset” screen. Select one of the 40 presets to save the current station and press “OK” to conrm.
Or press 0 to 9 on the Remote Control to store the current playing station into the preset directly.
To select a preset, press briey the “PRESET” button on the unit or “PROGRAM” on Remote Control, then
select one of the listed preset stations and press “OK” to conrm. Or press 0 to 9 on the Remote Control to
directly recall the presets.
Now Playing Information
While the stream is playing, the screen shows its name and DLS (Dynamic Label Segment) information
broadcast by the station giving real-time information such as program name, track title and contact details.
Stereo broadcasts are indicated with an icon at the bottom of the screen. To view further information, press
“INFO” on the radio. Each time you press “INFO” on the radio, another set of information is displayed, cycling
through DLS text, program type, ensemble name/frequency, signal strength/error rate, bite
rate/codec/channels and today’s date.
Settings
Dynamic Range Compression (DRC)
If you are listening to music with a high dynamic range in a noisy environment, you may wish to compress the
audio dynamic range. This makes quiet sounds louder, and loud sounds quieter. You can change DRC as off,
low or high.
Station Order
You can choose the order of the DAB station list to be either Alphanumeric, Ensemble or Valid.
Ensemble lists groups of stations that are broadcast together on the same ensemble. Valid lists valid stations
rst, alphanumerically, then off-air stations.
FM
FM radio mode receives analogue radio from the FM band and displays RDS (Radio Data System) information
about the station and where broadcast. To full scan, press “INTRO” remote key. The frequency display starts
to run and scans the FM full band. To ne tune press the ““ or “” remote key. The unit search in 0.05 MHz
steps.
Preset
To store an Internet radio preset, press and hold the “PROGRAM” button on Remote Control until the display
shows the “Save preset” screen. Select one of the 40 presets to save the current station and press “OK” to
conrm. Or press 0 to 9 on the Remote Control to store the current playing station into the preset directly.To
select a preset, press briey the “PRESET” button or “PROGRAM” button on Remote, then select one of the
listed preset stations and press “OK” to conrm. Or press 0 to 9 on the Remote Control to directly recall the
presets.
Now Playing Information
While the stream is playing, the screen shows its frequency, or if RDS signal is available, station name and any
further RDS information such as program name, title and other details. Stereo broadcasts are indicated with
an icon at the bottom of the screen. To view further information, press Info button on the radio. Each time you
press “INFO” button on the radio, another set of information is displayed, cycling through Radio text, program
type, frequency and today’s date.
Scan Settings

Scan Settings
Choose FM at rst, it will go to a specic station playing. Then press “MENU” on the radio to get above
table.By default, FM scans stop at any available station. This may result in a poor signal-to-noise ratio (hiss)
from weak stations. To change the scan settings to stop only at stations with good signal strength, select
“Yes” after choosing Strong station only.
Audio Settings
All stereo stations are reproduced in stereo. For weak stations, this may result in a poor signal-to-noise ratio
(hiss). To play weak stations in mono, select FM weak reception: Listen in mono only and then YES.
Bluetooth
When you select the Bluetooth mode, the device is entering to pairing and the Bluetooth icon at the bottom of
the screen will ash. Turn on your smartphone, tablet or other Bluetooth devices to search for the device. The
Bluetooth pairing name is “Majority Homerton 2”. When pairing is successful, the Bluetooth indicator will light
up and stop ashing. To release Bluetooth pairing, turn off or unpair your smartphone, table or other
Bluetooth devices. Press play on the radio or Remote Control to start or pause the playback. You can press
forward or backward on the radio or Remote Control to play the previous or next track.
AUX In
Connecting DVD player / Set-Top Box / TV outputs to analogue inputs from the sound board.Use a RCA audio
cable to connect the DVD player/TV outputs with the AUX (L/R) input socket from the sound board.
Sleep
To set the sleep timer, press “SLEEP” on the unit or Remote Control. Choose from Sleep OFF, 15mins, 30mins,
45mins or 60mins.Once you select a sleep period, the system returns to the “Now playing” screen.
If you go under Main Menu to Sleep press “MENU” on the unit or Remote Control to return to the “Now
playing” screen.
Alarm
There are two versatile wake-up alarms with snooze facility, and a sleep function to turn the system off after a
set period. Each alarm can be set to start in a particular mode.
Internet Radio mode requires full Wi connection.
Select Alarm under Main menu to set or change an alarm. Select the alarm number (1 or 2) then congure the
following parameters:
Enable: on/off, Frequency: Daily, Once, Weekends or Weekdays
Time
Mode: Buzzer, Internet Radio, CD, DAB or FM
Preset: Last listened, 1 – 40
Volume: 0 – 32
To activate the new settings, scroll down and select Save. The screen shows active alarms with an icon at the
bottom left.
Undok
The Homerton 2 supports remote control from Apple iPhone, iPad and Android using the UNDOK app. The
apps are available in Apple’s app store and Google’s android play.
The UNDOK app allows you to:
Create a group.

Rename a group.
Edit a group – add, remove or delete one or more products.
Control a group – choose operating mode and browse for content.
Adjust volume for an entire group or for individual products within a group.
Control products which have not been assigned to any group.
Control all the modes of the Homerton 2, including Internet Radio, Media Player, USB playback, DAB, FM,
Bluetooth, CD and AUX-In.
Setting EQ for various audio presets.
Setting Sleep timer.
Editing the displayed name of the radio.
Headphone
To listen to music privately, use headphones with a 3.5 stereo jack plug and connect it to the headphones
socket. The speakers will then be muted.To prevent possible hearing damage, do not listen at high volume
levels for long periods.
Factory reset
A factory reset resets all user settings to default values, so that time and date, network conguration and
presets are lost. However, the Homerton 2 ‘s current software version is maintained, as is registration with the
Internet radio portal. Internet radio favourites therefore remain unless you re-register your Homerton 2 with
another account on the portal website.
Warranty
Register your Majority product (https://www.majority.co.uk/register/) within 30 days of purchase to activate
your extended 3 Year Warranty. Gain access to all the benets and lifetime technical support (see our
Extended Warranty (https://www.majority.co.uk/returns-warranty/)details for more info).
Specications
Model No. 1000002805
Dimensions 20.2 x 23 x 12.8 cm
Power DC 18V 1.2A
AUX In 3.5 mm
Headphone Jack 3.5 mm
DAB 174 – 240 MHz
FM 87.5 – 108 MHz
Screen Colour LCD
Dimmable Yes
Safety Info


IMPORTANT
Please read all instructions carefully before use.
WARNING
Risk of electric shock. Do not open.
1. Read these instructions:
2. Heed all warnings.
3. Follow all instructions in the user manual.
4. Do no clean the apparatus near or with water.
5. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that produce
heat.
7. Protect the power from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from
the apparatus.
. Only use attachments/accessories specied by the manufacturer.
9. Unplug this apparatus during light storms or when unused for long periods of time.
10. Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in a way, such as
power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to the rain or moisture, does not operate normally or has been dropped.
11. No naked ame sources, such as lit candles, should be placed on the apparatus.
12. Dispose of used electrical products and batteries safely according to your local authority and regulations.
Addition Warnings
The apparatus shall not be exposed to dripping or splashing and no objects lled with liquid, such as vases, shall be places on the
apparatus.
Main plug is used to disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus
from the main power completely, the power plug should be disconnected from the main socket outlet completely.
Battery shall not be exposed to excessive heat such as sunshine, re or the like.
Recycling Electrical Products
You should now recycle your waste electrical goods and in doing so help the environment. This symbol means an electrical product
should not be disposed of with normal household waste. Please ensure it is taken to a suitable facility for disposal when nished with.