malkans SF8G User manual

SF8G
Assembly Instructions
© malkans ltd

2
Warning
Do not overtighten screws. Overtightening will damage the head and
threads of the screws.
Case structure fragile during assembly. Construct with care and avoid
unnecessary movement.
Remove the protective layer from both sides of all case panels before
assembling the case.

3
Parts List
1
Front Panel
1
Top Panel
20
M3 x 8 mm
4
M5 x 10 mm
1
Right Panel
1
Bottom Panel
8
M3 x 6 mm
4
Case Feet
1
Back Panel
10
Aluminium Nut
4
M3 x 5 mm
Button Head
4
M3 x 8 mm
Button Head
1
Left Panel
Power Switch
4
6-32, 3/8”
4
Hexagonal Nut
1

4
Step 1
Use 4 M3 x 8 mm screws to attach 4 Aluminium Nuts to the Right
Panel, making sure that the corners of the Aluminium Nuts are
aligned with the corners of the panel.

5
Step 2
Install your CPU, CPU Cooler, RAM and M.2 SSD to your
Motherboard. (Refer to your motherboard instruction manual)

6
Step 3
Align your Motherboard with the standos on the Right Panel and
use 4 M3 x 5 mm Button Head screws to attach the Motherboard to
the Right Panel.

7
Step 4
Use 2 M3 x 8 mm screws to attach the Back Panel to the Right Panel.
Tip: The holes in the panels are slightly larger than the screws to allow for
adjustments. During the build, you may loosen screws, adjust panels and
retighten screws to ensure that all panel edges are correctly aligned.

8
Step 5
Use 2 M3 x 8 mm screws to attach 2 Aluminium Nuts to the Back
Panel.

9
Step 6
Use 4 M5 x 10 mm screws to attach your 140 mm case fan to the Top
Panel.
Tip: The arrow on the side of your case fan indicates the direction of airow.
We recommend installing the fan so that it blows air out of the case.
Tip: Lay the case fan and top panel at for better stability to drive the screw
in straight and ensure that the screw head sits ush with the top panel.

10
Step 7
Attach the Power Switch to the Top Panel.

11
Step 8
Connect the power supply cables, case fan cable and power switch
cable to the corresponding motherboard connectors. Refer to your
power supply and motherboard instructions manuals.

12
Step 9
Use 3 M3 x 6 mm screws to attach the Top Panel to the case.

13
Step 10
Use 4 6-32, 3/8” screws to attach your SFX power supply unit to the
Back Panel and connect the loose power cables to the Power Supply
Unit. Refer to your power supply instructions manual.
Tip: Use cable ties for a tidy look and to prevent cables obstructing the case
fan.

14
Step 11
Connect your Graphics Card to the Motherboard and Power Supply
Unit.

15
Step 12
Use 4 M3 x 8 mm Button Head screws and 4 Hexagonal Nuts to
attach 4 Case Feet to the Bottom Panel.

16
Step 13
Use 2 M3 x 6 mm screws to attach the Bottom Panel to the case.
Tip: Ensure that the bottom panel is attached in the correct orientation as
shown below, so the corners align with the corners of the right panel.

17
Step 14
Use 2 M3 x 6 mm screws to attach 2 Aluminium Nuts to the Bottom
Panel.

18
Step 15
Use 1 M3 x 6 mm screw to attach 1 Aluminium Nut to the Top Panel.

19
Step 16
Use 1 M3 x 8 mm screw to attach 1 Aluminium Nut to the Corner
Piece of the Back Panel.

20
Step 17
Use 1 M3 x 8 mm screw to attach the Corner Piece of the Back Panel
to the Bottom Panel.