Mamas & Papas Ocean cot-bed User manual

instructions
ocean cot-bed
CBR295:V4/04/07
© Mamas & Papas (Holdings) Ltd. 2007
IMPORTANT: Please read instructions carefully
and keep for future reference
IMPORTANT: THE
ASSEMBLY OF THIS
PRODUCT REQUIRES
TWO PEOPLE.
IMPORTANT: PLEASE READ
THESE INSTRUCTIONS
CAREFULLY BEFORE
STARTING TO ASSEMBLE
YOUR PRODUCT.

Components
Item Description Part no. Qty.
1 Left drawer side 311397900001 1
2 Right drawer side 311397900002 1
3 Drawer back 311397900003 1
4 Centre rail 311397900004 1
5 Drawer bases 311397900005 2
6 Drawer front 311397900006 1
Item Description Part no. Qty.
7 Head end 311397900101 1
8 Foot end 311397900102 1
9 Cot sides 311397900103 2
10 Back rail 311397900107 1
11 Base 311397900100 1
12 Front rail 311397900106 1
Before assembling your product...
Do not discard any packaging until you are certain you have all the correct components and fittings.
If any items are damaged or missing, please contact your retailer or Mamas & Papas on 0870 8307700.
Allow plenty of time and space when beginning the construction of your product.
oCean Cot-bed
-2-
13
5
5
2
6
4
9
7
12
8
9
11
10

-3-
C x 6
Cam studs
Cross head screwdriver
Fittings
tooLs required
IMPORTANT: The use of powered screwdrivers is not recommended for assembling this product.
B x 6
Screws
A x 6
Cams
D x 4
Short bolts
E x 8
Long bolts
F x 4
Base brackets
G x 4
Base bracket nuts
H x 4
Rail inserts
I x 4
Blanking nuts
K x 1
Flat head screwdriver
J x 1
Allen key

step 1step 2
Slot four cams (A) into
the large holes in the
inside faces of the two
drawer sides (1&2).
Ensure the arrows on the
cam heads are pointing
towards the connecting
holes in the edges of the
drawer sides.
Ensure that the slots in
the drawer back and sides
face into the drawer and
are correctly aligned, see
diagram.
Screw four long assembly
screws (B) through the
holes in drawer sides
(1&2) and into the holes
in the side edges of the
drawer back (3).
Screw two long assembly
screws through the holes
in the centre of the
drawer back and into the
holes in the centre rail
(4).
Tighten the screws using
a cross-head screwdriver.
-4-
1
a
2
3
b
4
2
1

step 3step 4
Slot the drawer bases (5)
into the grooves in the
drawer sides and centre
rail.
Push the drawer bases
along the grooves and
into the recess in the
drawer back.
The drawer bases are
rectangular. Ensure
that the short edges of
the drawer bases are
connected to the drawer
sides and centre rail.
Screw six cam studs (C)
into the metal inserts
in the inside face of the
drawer front (6).
Use a cross-head
screwdriver to tighten the
cam studs into the drawer
front.
-5--5-
5
5
6
C

step 5step 6
Slot the drawer front (6)
onto the drawer sides,
centre rail and drawer
bases, see diagram.
Align the cam studs in
the drawer front with
the connecting holes in
the drawer sides and
centre rail. Ensure that
the drawer bases slot into
the recesses in the drawer
front.
Secure the drawer front in
position by tightening the
four cams in the drawer
sides. Lock the cams by
turning them clockwise
with the thick end of the
allen key (J).
Turn the assembled
drawer upside down and
slot two cams (A) into
the large holes in the
centre rail (4). Ensure the
arrows on the cam heads
are pointing towards the
connecting holes in the
front edge of the centre
rail.
Lock the cams by turning
them clockwise using the
thick end of the allen key
(J).
-6-
6
J
J
a
4

step 7step 8
Slot the back rail (10)
onto the head end (7) as
shown.
Fasten the back rail to the
head end by slotting one
of the rail inserts (H) into
the hole in the rail.
Push one of the short
bolts (D) through the hole
in the rail insert and back
rail.
Tighten the short bolt
into the head end using
the long end of the allen
key (J).
Important: Only half
tighten the bolts into the
cot end.
Slot one of the cot sides
(9) onto the head end as
shown in the diagram.
Fasten the cot side in
place by inserting two
long bolts (E) through the
end rail of the cot side.
Screw the bolts half way
into the head end using
the long end of the allen
key (J).
IMPORTANT: Do not fully
tighten the bolts of fasten
the cam in the bottom
rail of the cot side until
the remaining cot side has
been fitted.
-7-
7
10
J
d
H
9
e
J

step 9step 10
Fasten the foot end (8) to
the other end of the cot
side using two long bolts
(E) and the thin end of
the allen key (J).
Slot one of the rail inserts
(H) into the bottom rail.
Slot one of the short bolts
(D) through the hole in
the insert and tighten into
the foot end using the
thin end of the allen key
(J).
Important: Only half
tighten the bolts until the
other cot side is fitted.
Attach the remaining cot
side (9) to the cot ends.
Fasten the cot side to the
cot ends by screwing in
four long bolts (E). Fully
tighten the bolts into the
cot ends using the long
end of the allen key (J).
-8-
8
J
d
H
e
J
e
J
9

step 11step 12
Tighten all of the four
long bolts in the side
fitted first using the long
end of the allen key (J).
Tighten the two long
bolts in the bottom back
rail with the long end of
the allen key.
Slot the four base
brackets (F) into the
holes in the cot sides, see
diagram. Select one of the
three base heights that
you require. Ensure they
are all at the same height.
See ‘Instructions For Safe
Use and Maintenance’
on page 19 for more
information on base
heights.
-9-
J
F

step 13step 14
Attach the base (11)
(with the information
label facing upwards) by
lowering it onto the base
brackets. Ensure that the
threaded ends of the base
brackets fit into the holes
in the corners of the base.
Push the base bracket
nuts (G) into the holes in
the corners of the base
and screw them onto
the threaded ends of
the base brackets using
the flat head screwdriver
supplied.
Slot the runners on the
drawer into the runners
on the cot ends and push
the drawer into the cot.
-10-
g
11

step 15step 16
The cot is now fully
assembled.
Check that all the fittings
are fully tightened before
use.
Before the day bed can be
assembled you will need
to partially dismantle the
cot.
Remove the drawer, the
front cot side (9) and the
base (11).
Store all unused fittings
and components in a safe
place.
-11-
9
11

step 17step 18
Half loosen the four long
bolts in the cot side using
the long end of the allen
key (J).
Half loosen the two short
bolts in the back rail using
the allen key.
Gently spread the cot
ends until the dowels on
the front rail (12) will slot
into there relevant holes
in the cot ends.
Slot two of the rail inserts
(H) into the front rail.
Slot two of the short
bolts (D) through the
holes in the inserts and
tighten into the cot ends
using the long end of the
allen key (J).
-12--12-
J
d
H
J
12

step 19step 20
Fully tighten the four long
bolts in the cot side using
the long end of the allen
key (J).
Tighten the two short
bolts in the back rail using
the allen key.
Slot the ends of the four
base brackets (F) into the
holes in the cot side and
front rail.
Only use the bottom
base height holes in the
cot side. Ensure the base
brackets are all at the
same height.
-13-
J
F

step 21step 22
Attach the base (11)
(with the information
label facing upwards) by
lowering it onto the base
brackets. Ensure that the
threaded ends of the base
brackets fit into the holes
in the corners of the base.
Push the base bracket
nuts (G) into the holes in
the corners of the base
and screw them onto
the threaded ends of
the base brackets using
the flat head screwdriver
supplied.
There are four screw holes
in the cot ends that are
used for the construction
of the cot only. These
must be plugged using
the blanking bolts (I).
Screw the four blanking
bolts into the holes in the
cot ends from the inside,
see diagram.
Tighten the blanking bolts
into the cot ends using
the long end of the allen
key (J).
-14-
g
11
i
J

step 23step 24
Slot the runners on the
drawer into the runners
on the cot ends and push
the drawer into the day
bed.
The day bed is now fully
assembled.
Check that all the fittings
are fully tightened before
use.
-15-

-16--16-
After sales Service: If you need assistance, spare parts or you are unhappy with any aspect of the goods please
contact Customer Services on: 0870 8307700, or e-mail us at: customer[email protected].
Visit our website at www.mamasandpapas.com for the latest product information.
instruCtions For saFe use & maintenanCe
When using the cot the bottom base height position is the safest. You should use the cot
in this position as soon as your baby is old enough to sit up.
Never leave anything in the cot/bed which could provide a foothold for your child to climb
out or would present a danger of suffocation or strangulation.
All assembly fittings should be tightened properly and care should be taken to ensure
that no screws are loose, a child could trap parts of the body, or clothing (e.g. ribbons,
drawstrings, necklaces) this could pose a risk of strangulation.
Regularly check that all fittings and components of the cot/bed are fully tightened and
in working order. If any parts have become worn or damaged then do not use the cot/
bed, seek advice from your retailer or by calling our Customer Services Helpline on:
0870 8307700. Do not use replacement parts that are not recommended or supplied by
Mamas & Papas. Non-approved parts may render the repair or cot/bed unsafe.
Do not place your cot/bed in the close proximity of an open fire and other sources of
heat, such as radiators, electric or gas fires.
For reasons of safety we only recommend the use of the Mamas & Papas size 400
mattress for this cot/bed.
The mattress should be no more than 40mm shorter or narrower than the internal length
or width of the cot/bed.
The thickness of the mattress chosen should be such that the internal height (the
distance between the surface of the mattress to the upper edge of the cot side) is a
minimum of 500mm when the base is set in the lowest position and a minimum of
200mm when the cot base is set in the highest position.
Wood is a natural product and as such one of its charms is occasional variation in colour
or marking. These marks are not defects and do not detract from the strength or
performance of your cot-bed.
Your cot/bed may be cleaned with a damp cloth. Never use bleach or harsh abrasives.
•
•
•
•
•
•
•
•
•
•
Due to constant updating and improvements, some components may occasionally differ slightly from the diagrams shown in
these instructions. We reserve the right to change the specifications of any product without prior notice.
The maximum height (i.e. upper surface) of any mattress fitted must not exceed the line
engraved on the inside of the cot sides. We recommend the use of the Mamas & Papas size:
400 mattress.