Mapex FALCON P1000 User manual

P1000 & P1000TW
PEDALS
USERMANUAL
www.mapexdrums.com
www.falconpedal.com
© 2010 copyrights by Mapex, Inc.
Printed in China
• Falcon Beater angle Adjustment
1. Using the Mapex drum key supplied with the Falcon pedal
turn the drum key screw counter clockwise until the Mapex
falcon beater and black beater housing move freely.
2. Once you have achieved the desired position for your
beater turn the drum key on the drum key screw clockwise
and x the beater into place.
• Lateral : Falcon Beater Position Adjustment
Step 1
1. Remove the Falcon Beater. Using the Allen wrench supplied
with your Falcon pedal, insert into the head of the Allen
screw positioned at the front of the black beater holder.
2. Turn the Allen wrench counter clockwise until the black
beater holder is free to move.
• Lateral : Falcon Beater Position Adjustment
Step 2
Find your desired beater holder position (beater position). Turn
the Allen wrench clockwise to tighten the beater holder rmly
into position.
• Changing Falcon Beater Weights
With your Falcon pedal (P1000) you have a replacement
20g weight and with the double pedal (P1000TW) 2PC 20g
weights.
Step 1
1. To change the weights, using the Allen wrench supplied
with your Falcon pedal, insert into the Falcon beater head
and until you feel the wrench fitting into an Allen screw
inside the beater weight.
2. Turn the Allen wrench counter clockwise until you feel the
10g beater has loosened.
3. Remove the Allen wrench from the beater head and then
remove the 10g beater weight.
PLEASE NOTE
The same action is performed onto the auxiliary
black beater holder when using the Falcon
double pedal (P1000TW).
• Changing Falcon Beater Weights
Step 2
1. Insert into the falcon beater head the 20g weight with the
at side at the bottom.
2. Insert the Allen wrench into the beater head until you feel
the wrench fitting into an Allen screw inside the beater
weight.
3. Turn the Allen wrench clockwise until you feel the beater
weight is tight and secure.
PLEASE NOTE
The Falcon beater can be used without any
beater weights inserted into the beater head
for that extreme light feel.
• Changing the Falcon Spring
Step 1
Using the Mapex drum key
supplied with the Falcon pedal,
t u r n t h e dr u m ke y s c r e w
counter clockwise until the
Mapex Falcon spring holder
moves freely.
Step 2
1. Remove the spring holder off
of the shaft.
2. Remove the actual spring
from the black swivel spring
holder.
DO NOT
Remove the spring by loosening the chrome
Allen screw.
Let your feet fly...
1
456
2 3

• Changing the Drive Connectors
Step 1
1. Using the Mapex drum key
supplied with the Falcon
pedal, turn the drum key
screw counter clockwise
until the screw is completely
loosened.
2. Lift the chain and the drum
key screw off of the cam.
Step 2
1. Using the Mapex drum key
supplied with the Falcon
pedal, turn the drum key
screw counter clockwise
until the screw is completely
loosened.
2. Remove the chain from the
pedal completely.
• Changing the Falcon Cam
Step 3
1. Place the alternative cam back onto the drive shaft cam
collar.
2. Using your Mapex drum key turn the screw clockwise until
the alternative cam is secure to the drive shaft cam collar.
3. Place the chain with the drum key screw onto the cam.
4. Using the Mapex drum key turn the drum key screw
clockwise and secure the chain to the cam.
• Changing the Falcon Spring
Step 3
1. Install the new spring onto the holder.
2. Place the spring holder back onto the shaft.
3. Using the Mapex drum key supplied with the Falcon pedal,
turn the drum key screw clockwise until the falcon spring
holder is tight and secured.
• Falcon Footboard Angle Adjustment
1. Using the Mapex drum key supplied with the Falcon pedal
turn the drum key screw counter clockwise until the Mapex
Falcon Cam and footboard move freely.
2. Find the desired footboard height / position then using your
Mapex drum key turn the drum key screw clockwise until
the falcon Cam and the footboard are secured into your
desired position.
• Falcon Toe Stop Adjustment
1. Using the Mapex drum key
supplied with the Falcon
pedal turn the drum key
screw counter clockwise until
the Mapex Toe Stop moves
freely.
2. Find your desired position
and turn your mapex drum
key clockwise to secure into
position.
• Changing the Falcon Cam
Step 1
1. Using the Mapex drum key
supplied with the Falcon
pedal turn the drum key
screw counter clockwise
until the screw is completely
loosened.
2. Lift the chain and the drum
key screw off of the cam.
Step 2
Using the Mapex drum key
supplied with the Falcon pedal
turn the drum key screw holding
the cam counter clockwise until
the cam can be completely
removed from the drive shaft
cam collar.
• Changing the Drive Connectors
Step 3
1. Install the Strap Connector to the bottom of the Falcon
footboard by using the drum key screw.
2. Using the Mapex drum key turn clockwise until secure.
3. Install the top of the Strap Connector to the cam by using
the drum key screw.
4. Using the Mapex drum key turn clockwise until secure.
MEMO
7
11
8
12
9
13
10