Marcrist DDM3 User manual

Marcrist International Limited
Marcrist House
Kirk Sandall Industrial Estate
Doncaster DN3 1QR
England
T: [phone]
F: [phone]
E: [email protected]
W: www.marcrist.com
Marcrist Diamantwerkzeuge
Vertriebsgesellschaft mbH
Karl-Benz-Str. 8
79761 Waldshut-Tiengen
Deutschland
T: [phone]
F: [phone]
E: [email protected]
W: www.marcrist.com
Marcrist Diamantwerkzeuge GmbH
Postfach 37
5322 Koblenz
Schweiz
T: [phone]
F: [phone]
E: [email protected]
W: www.marcrist.com
DDM3-230:Layout 1 11/03/2010 09:19 Page 1

Welcome to Marcrist
The information in this manual referring to specification, design, equipment,
materials and external appearance relates to the time at which this manual
was printed. Whilst every effort is made to ensure its accuracy, the
information in this manual is not binding and is subject to alteration.
Year of manufacture 2010
DDM3 - 230 Diamond Core Drill
DDM3-230:Layout 1 11/03/2010 09:19 Page 2

CONTENTS
ENGLISH 01
DEUTSCH 14
ESPAÑOL 30
FRANÇAIS 43
ITALIANO 57
NEDERLANDS 71
DDM3 – 230 Diamond Core Drill
Congratulations
You have chosen Marcrist for your diamond drilling system. We thank you for your choice and
confidence!
Marcrist has the sole ambition to lead in diamond technology and quality. The Result is outstanding
quality for the professional tradesman.
Marcrist is accepted worldwide as a technology leader in diamonds. Marcrist diamond tools are
used by professional tradesmen who value performance, safety and the lowest possible drilling
costs.
The best diamond drilling machine is only as good as the cores which are being used. The
machine cannot drill if the cores don’t drill!
When choosing diamond cores always consider the cost per hole rather than just the lowest
purchase price.
A better core may cost a little more but it will invariably last much longer (up to 20 times) and drills
at least twice as fast and does not damage the machine!
Because of this, better cores result in costing you between 10–20 times less than cheap cores.
Marcrist International Ltd
DDM3-230:Layout 1 11/03/2010 09:19 Page 3

1
Registration
Guarantee
Register your machine or drill stand within 28 days for its lifetime warranty and 5 years
free servicing* (with service vouchers, which you receive free with every Marcrist 850X
diamond core drill).
How To Register
To activate the lifetime warranty and 5 years free servicing register your machine or drill
stand by mail or via internet . Registration only takes a few minutes. It will save you lots
of money.
By Mail
With the enclosed form and envelope.
Internet
www.marcrist.com/registration.
30 DAYS MONEY BACK GUARANTEE
If you are not completely satisfied with the performance of your machine or drill stand,
simply return it within 30 days, in its original packaging, which is suitable for resale and
fit for purpose, to your Marcrist distributor, for a full refund.
Proof of purchase must be produced.
LIFETIME MANUFACTURERS WARRANTY
If your machine or drill stand becomes defective due to faulty materials or workmanship,
we guarantee to replace all defective parts free of charge or, at our discretion, replace
the unit free of charge provided that:
• Proof of purchase is produced and the product has been registered.
• The defect is not due to normal wear and tear.
• The product has not been misused and has been serviced regularly.
• Professional quality consumables, capable of drilling hard materials, have been used
exclusively.
• Repairs have not been attempted by unauthorised persons.
Marcrist 5 YEAR FREE MAINTENANCE AND REPAIRS*
Your machine or drill stand has been designed to operate for a long period of time with
a minimum of maintenance.
DDM3-230:Layout 1 11/03/2010 09:19 Page 4

2
With every Marcrist 850X core purchased you receive a free service voucher. Collect vouchers
and, together with the machine or drill stand needing service and your proof of purchase, hand
them to your Marcrist distributor. Your distributor will send the machine and vouchers to Marcrist.
All you have to do is to pay the postage.
If the machine or drill stand was beyond repair, Marcrist would, in return for the vouchers, even
give you a replacement machine or drill stand, completely free!
The cost of the postage to return the machine or drill stand to you is also covered with the vouchers.
If a machine or drill stand needing service and repair is returned without vouchers, all work and
postage will be chargeable at the industry standard rate for power tool repairs.
If you have insufficient vouchers, the repair costs will be reduced as a % of your vouchers. i.e.
DDM2 with 5 vouchers would equal 50% off the cost of repairs.
This guarantee is offered as an extra benefit and is in addition to the consumer’s statutory rights.
*With the free service vouchers, Marcrist will, within 5 years from the date of purchase, carry out
the service completely free at no charge. All costs for each service and for any parts are covered
by the vouchers!
**For your safety the machines & drill stands must be serviced every time you have collected the
appropriate amount of vouchers (meaning you will have very extensively used the machine) or, at
18 month intervals. The guarantee may, at the sole discretion of Marcrist, become null and void,
if the machine or drill stand is not serviced every appropriate number of cores or within 18
months (whichever is the soonest).
Number of vouchers needed for FREE repair, service, safety chec ,
including all parts and labour:
DDM2 diamond drill – 10 vouchers
DDM3 diamond drill – 15 vouchers
DDM4 diamond drill – 20 vouchers
DS150 drill stand – 5 vouchers
DS250 drill stand – 7 vouchers
Machines
• Check up / cleaning
• Clutch re-setting
• Bearing changes
• Seal replacements
• Electrical safety test
Drill Stands
• Check up / cleaning
• Check operation & guide assembly
• Replace worn parts on guide system
Continuous satisfactory and safe operation depends however, upon proper care and
maintenance.
Regularly, at least every 18 months ** take the machine or drill stand to your Marcrist
distributor for inspection which includes:
Guarantee
DDM3-230:Layout 1 11/03/2010 09:19 Page 5

3
General Power Tool Safety Warnings
WARNING - Read all safety warnings designated by the symbol and all
instructions. Failure to follow the warnings and instructions may result in electric shock,
fire and/or serious injury.
Save all warnings and instructions for future reference.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the
dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions
can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do
not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if your body is
earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power tool
will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging
the power tool. Keep cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for
outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable, use a residual
current device (RCD) protected supply. Use of an RCD reduces the risk of electric
shock.
3) Personal Safety
a) Stay alert, watch what you are doing and use common sense when operating a
power tool. Do not use a power tool while you are tired or under the influence of
drugs, alcohol or medication. A moment of inattention while operating power tools
may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection. Protective
equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection
DDM3-230:Layout 1 11/03/2010 09:19 Page 6

4
used for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off-position before
connecting to power source and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or energising power tools that
have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on. A wrench or
a key left attached to a rotating part of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This enables better
control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing
and gloves away from moving parts. Loose clothes, jewellery or long hair can be
caught in moving parts.
g) If devices are provided for the connection of dust extraction and collection facilities,
ensure these are connected and properly used. Use of dust collection can reduce
dust-related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool for your application. The
correct power tool will do the job better and safer at the rate for which it was
designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power
tool that cannot be controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or the battery pack from the
power tool before making any adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the risk of starting the power tool
accidentally.
d) Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended could
result in a hazardous situation.
5) Service
a) Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
DDM3-230:Layout 1 11/03/2010 09:19 Page 7

5
DDM3 – 230 Safety Warnings & Information
Observe Safety Instructions
When using the DDM3 - 230 observe the safety regulations applicable to your country
to reduce the risk of fire, electric shock and personal injury.
Read the safety instructions before attempting to operate the DDM3 - 230. Save
all warnings and instructions for future reference.
Operational Safety
• The DDM3 - 230 is a professional drilling machine capable of drilling up to 200mm
diameter and its internal clutch is calibrated to accommodate this.
• When drilling, at all times, care must be taken.
• Please study carefully the safety instructions and the training manual.
• Make sure that everybody who works with the DDM3 - 230 gets properly instructed to
the machine and its instructions prior to use.
• Assess the work area and employ measures to minimise any risks to you or other
persons.
• Always ensure you are working safely and within current legislation and regulations.
Additional information
The vibration emission during actual use of the power tool can differ from
the declared total value depending on the ways in which the tool is used.
Avoid vibration risk. Wear gloves during operation. Limit operating time &
shorten trigger time.
Wear ear protectors when impact drilling.Exposure to noise can cause hearing loss
Use auxiliary handle, if supplied with the tool. Loss of control can cause
personal injury.
Hold the power tool by an insulated handle when performing an operation
where the cutting accessory may contact hidden wiring or its own cord. The
Cutting accessory contacting a “live” wire may make the exposed metal parts of the power
tool “live” and could give the operator an electric shock
.
DDM3-230:Layout 1 11/03/2010 09:19 Page 8

6
• Always wear eye protection, ear protection, dust mask and safety boots.
• Hold the DDM3 - 230 firmly with both hands.
• Always be aware that if the core bit jams the drill may rotate before the clutch
engages.
• Never drill from a position where you are not in full control of the DDM3 - 230.
• If drilling above chest height, work platforms should be used.
• Never drill from a ladder.
• Try to avoid continuous operation and consider a break once in a while. Stop working
immediately if you notice a tingle in your hands.
Above points are to be observed at any time. Failing to comply may
result in serious damage or endanger your health. If there are any
questions or queries, please contact your dealer.
DDM3-230:Layout 1 11/03/2010 09:19 Page 9

7
Using Instructions
Item Description
1 Trigger
2 Trigger lock
3 Level bubble
4 Spindle
5 Handle
6 Gear selector
7 Side handle
8 Water hose assembly
9 Adapter
10 RCD
11 230V Plug
Your DDM3 - 230 machine is supplied so it can be used with Marcrist diamond cores &
drilling accessories. Only use the DDM3 - 230 for the purpose for which it was
designed i.e. diamond drilling!
Contents
• DDM3 – 230V diamond drilling machine.
• 1/2” BSP to 1/2” BSP adaptor.
• Spanners to help set up and removal of core drills & accessories from the machine.
Illustrated description of functions
The main functions of the DDM3 - 230 are illustrated below.
DDM3-230:Layout 1 11/03/2010 09:19 Page 10

7700.001.001 UK (230V) 7700.001.002 UK (110V) 7700.001.003 DE 7700.001.004 CH DDM3 Marcrist Diamond Drilling Machine
340.101.0023 1/2” BSP to 1/2” BSP Adaptor
330.101.0006
250mm Extension rod
1/2“ BSP A-Taper (optional) CCU850X
Marcrist Combi Core 165mm length
340.101.0150 165mm complete dust shroud kit. Dust Shroud Adaptor 1/2” BSP, dust shrouds for 38-82mm Ø and 91-152mm Ø short cores and anti-rotation bar.
350.101.0002
Drift Key
340.101.0110 Core extraction kit. Includes Slide Hammer for core extraction and guide rod.
310.101.0013 225mm A-Taper Pilot Drill for short cores
An operation diagram showing typical assembly with core drills & accessories is shown below.
Operational Diagram for Short and Long Cores
8
DDM3-230:Layout 1 11/03/2010 09:19 Page 11

9
Connection to the power supply
Electrical safety
The electric motor has been designed for one voltage only. Always check that the power
supply corresponds to the voltage on the nameplate.
Do not change the plug unless you are duly authorised to do so!
Take the DDM3 - 230 to your nearest Marcrist Distributor.
In-line protector RCD
The DDM3 – 230 features a residual current device that cuts off the unit within 15
milliseconds in the event that there is a difference (>10 mA) between the currents flowing in
and out of the unit. The user is therefore protected should any water come into contact with
any of the electronic components.
Never use the tool without the RCD provided with the tool. Always test the correct
operation of the RCD before starting work (see below).
To test the RCD unit is working correctly, proceed as follows:
• Plug in machine into the appropriate power supply (11).
• Depress the reset button on RCD (10) (Red light indicator is illuminated).
• Switch on the machine by depressing trigger (1).
• Depress the test button on RCD (10).
• The switch must break the circuit (red light indicator goes off and machine switches off).
• RCD is working correctly.
If in the test mode the switch does not break the circuit DO NOT USE.
Take the DDM3 - 230 to your nearest Marcrist Distributor to arrange inspection &
repair.
It is not permitted to make any modifications to the machine, in
particular it is not allowed to open the RCD or to repair or to replace the cable. If it
is need of inspection or repair take to your nearest Marcrist distributor.
Never use the RCD as a main switch. Always switch on the RCD under no
load condition.
If an extension cable is to be used always ensure it is of an approved type
for application and the cable is of a minimum rating for the machine. Always
operate extension cord with the cable reel fully unwound.
Use in ambient conditions.
It is not recommended to use your DDM3 - 230 machine in conditions that are extreme hot
or extreme cold. Do not use the machine in wet conditions.
DDM3-230:Layout 1 11/03/2010 09:19 Page 12

10
Accessories
Operating Instructions
Follow all safety instruction and observe any relevant regulations.
Work piece and working area
Always ensure that materials to be drilled are securely supported and
stable and will not move during operation. Ensure that the core drill selected is
suitable for the material being drilled.
Be aware of the location of pipe work, wiring, fixture and fittings.
Gear Selection
1. Ensure power supply is off. When selecting any gear rotate the drill spindle (4)
slowly while turning the selector (6) to the appropriate speed. This will ensure
smooth selection of gear.
2. Do not change gears when the tool is rotating and in use. Failure to follow this
instruction could result in damage to the machine.
3. See speed chart on page 12. Adjust the speed for harder/softer materials
accordingly. Lower speeds should be used for harder materials, higher speed for
softer materials.
Assembly & operation
1. Plug in machine into the appropriate power supply (11).
2. Test correct operation of RCD (10) unit before use (see above).
3. Disconnect power. For core drills with 1/2” BSP thread, screw 1/2” BSP adaptor (9)
into drill spindle (4).
4. Screw core drill with 1/2” BSP thread onto adaptor (9).
5. For core drills with 11/4” UNC thread, screw directly into drill spindle (4).
6. Hold firmly the side handle (7) with one hand and main handle (5) with other hand.
7. To operate the machine depress the trigger (1).
8. With core drill running approach the surface to be drilled with the drill at an angle
of approximately 15 degrees. As the segments bite gradually bring to a horizontal
position and continue drilling.
9. For continuous operation depress the trigger lock button on handle (5) while trigger
(1) is operated.
10. Apply only gentle pressure during operation. Excessive force may damage the
machine or accessories and could result in a shortening of tool life.
11. To stop drilling depress the trigger (1).
12. Disconnect the power from the supply.
13. Remove the core from DDM3 - 230 or adaptor (9) using the spanners provided.
Drilling aids and accessories are available from Marcrist. Contact your Marcrist dealer
for more information.
DDM3-230:Layout 1 11/03/2010 09:19 Page 13

11
1. Connect the 350mm long water hose (8) on DDM3 - 230 to a suitable water
supply by push fitting into a “Gardena” or “Hozelock” type fitting which is
attached to a hose pipe. The hose pipe could be typically between 5m - 20m in
length.
2. Turn on water supply.
3. Turn on tap on the water hose so that a steady flow of water cools the segments
on the core.
Do not exceed the recommended maximum water pressure of 2 bar.
The hose (8) should always be checked that is in a satisfactory condition
before use and is not split and does not leak water. DO NOT USE IF THE
HOSE IS LEAKING WATER OR IS DAMAGED.
A minimal flow of water direct to the core segments & material helps cool the drilling
area & improve drilling performance.
Keep water away from the parts of the tool & away from persons in the
working area.
Always test the correct operation of the RCD before starting work.
If the plug or supply cable needs replacing then take the DDM3 - 230 to your
nearest Marcrist Distributor.
Your Marcrist diamond-drilling machine is manufactured to the highest possible
Connection to water supply for hand held wet drilling
Always follow the manufactures guidelines when attaching accessories to the machine.
Certain very hard materials such as reinforced concrete can present problems for dry
drilling. They may cause excessive heat & consequent polishing (blunting) of the
diamond segment on the core.
This can result in poor drilling performance and can be overcome by connection of a
suitable water supply onto the hose of the DDM3 - 230 machine using a “Gardena” or
“Hozelock” type fitting as shown in the diagram below.
DDM3-230:Layout 1 11/03/2010 09:19 Page 14

12
standards. Continuous satisfactory operation depends upon the proper servicing and
maintenance of the drilling machine.
For your safety the machine must be serviced every time you have collected 15
vouchers (meaning you will have very extensively used the machine) or, at 18 month
intervals. The guarantee may, at the sole discretion of Marcrist, become null and void, if
the machine is not serviced every 15 cores or within 18 months (whichever is the
soonest).
If replacement of the supply cable or plug is necessary, take the DDM3 - 230
to your nearest Marcrist Distributor to avoid a safety hazard.
Keep the ventilation slots clear of dust and foreign objects. Regularly clean the machine
with a damp cloth. Do not use chemicals to clean the machine.
Sound Levels
Level of sound pressure measured according to EN 60745-2-1/A12:2009
LpA (sound pressure level) 88.90 dB(A)
LwA (sound power level) 99.90 dB(A)
Uncertainty K : 3 dB (A)
Always take suitable measures for the protection of your hearing.
Acceleration & Vibration Value
Maximum vibration value ah,DD drilling into concrete: 8.797m/s2
Uncertainty (K): 1.50 m/s2
Tested in accordance with EN60745-2-1/A12:2009
Values are dependant on local conditions and will vary with the condition and diameter
of the core being used on the DDM3 – 230 and also on the material being drilled.
Emissions
Maintenance
DDM3-230:Layout 1 11/03/2010 09:19 Page 15

13
Technical data DDM3 - 230
Voltage 230 V
Power Input 1500 W
No load speed
1st gear 950 min-1
2nd gear 1800 min-1
3rd gear 3450 min-1
Maximum drilling Gear Wet Dry
diameter with 1 ø61-200mm ø118-200mm
diamond core bits 2 ø33-60mm ø61-117mm
3 ø22-32mm ø22-60mm
Outer thread 11/4” UNC (32mm) Inner thread 1/2” BSP (19mm)
Spindle thread
Side handle clamp 60 mm
Weight 6.9 kg
Technical Data
Maximum diameter shown on the
label only applies to Marcrist
core drills. By using low quality
core drills the maximum usable
diameter will be reduced.
DDM3-230:Layout 1 11/03/2010 09:19 Page 16

14
Technical Hotline
For all your technical queries:
Technical Hotline UK: [phone]
Technical Hotline Germany: [phone]
Technical Hotline Switzerland: [phone]
WARNING - Read all safety warnings designated by the symbol and
all instructions. Failure to follow the warnings and instructions may result in electric
shock, fire and/or serious injury.
Torque limiting clutch
The DDM3 - 230 is equipped with a torque-limiting clutch that reduces the maximum
torque reaction transmitted to the operator in case of jamming of a core bit. This feature
also prevents the gearing and electric motor from stalling. The torque-limiting clutch has
been factory-set.
CE-Declaration of conformity
Marcrist declares that the DDM3 - 230 Drilling Machine conforms to all current
standards and directives EN60745-1: 2009, EN60745-2-1/A12:2009, EN55014-1:
2006, EN55014-2/A1: 2001, EN61000-3-2: 2006, EN61000-3-11: 2000,
2006/42/EC, 2006/95/EC, 2004/108/EC. A detailed certificate of conformity is
available upon request.
Recycling
According to WEEE directive 2002/96/EC, old machinery should be returned
for recycling or safe disposal when they eventually become to be thrown away
(see symbol on nameplate of the drill). Separate collection of used products and
packaging allows materials to be recycled and used again. Re-use of recycled materials
helps prevent environmental pollution and reduces the demand for raw materials.
Ensure that the old tool is returned to Marcrist International Ltd and does not end up in
unsorted municipal solid waste.
DDM3-230:Layout 1 11/03/2010 09:19 Page 17

Willkommen bei Marcrist
Die in diesem Handbuch enthaltenen Informationen bezüglich Spezifikation,
Design, Ausrüstung, Materialien und äußere Erscheinung beziehen sich auf die
Zeit, als das Handbuch gedruckt wurde. Während wir uns bemühen, die
Genauigkeit des Handbuchs zu sichern, sind die in ihm enthaltenen
Informationen nicht bindend und Änderungen sind vorbehalten.
Fertigungsjahr 2010
Diamantbohrmaschine DDM3 -230
DDM3-230:Layout 1 11/03/2010 09:19 Page 18

16
Herzlichen Glückwunsch
Sie haben sich für das Marcrist Bohrsystem entschieden. Wir danken Ihnen für Ihre Wahl
und Ihr Vertrauen!
Marcrist ist ein europäisches Familienunternehmen, das sich kompromisslos der Qualität
verschrieben hat. Marcrist geniesst weltweit den Ruf eines Innovations- und
Technologieführers.
Unsere Diamantwerkzeuge kommen überall beim Handwerk zum Einsatz, wo es auf
Leistung und Sicherheit ankommt. Marcrist Bohrer sind europäische
Präzisionswerkzeuge. Die beste Bohrmaschine ist immer nur so gut wie der
Diamantbohrer, der eingesetzt wird. Wenn der Bohrer nichts taugt, hilft die beste
Maschine nichts.
Entscheiden Sie sich beim Diamantbohrer nicht auf Grund des Einkaufpreises, sondern
der Kosten pro Loch. Ein besserer Diamantbohrer kann ein bisschen mehr kosten, hält
aber wesentlich länger (oft bis zu 20 mal länger). Er bohrt viel schneller und schont die
Maschine. Damit sind die Kosten pro Loch bei besseren Diamantbohrern oft um mehr als
das 10 bis 20-fache tiefer als bei Billig-Diamantbohrern.
Marcrist International Ltd
Produktmanagement
Technische Beratung
Für all Ihre Fragen rund um Diamant:
Technische Beratung - Deutschland: [phone]
Technische Beratung - Schweiz: [phone]
Technische Beratung - Großbritannien: [phone]
DDM3-230:Layout 1 11/03/2010 09:19 Page 19

17
Anmeldung
Garantie
Registrieren Sie Ihre Maschine oder Bohrständer innerhalb von 28 Tagen ab Kaufdatum für
lebenslage Herstellergarantie und 5 Jahre Gratis-Service* (mit Marcrist Service-Gutscheine, die Sie
beim Kauf einer jeden Marcrist 850X Diamantbohrkrone gratis erhalten).
Wie kann man sich anmelden
Zur Aktivierung der lebenslangen Herstellergarantie und 5 Jahre Gratis-Service melden Sie Ihre
Marcrist Bohrmaschine oder Bohrständer per Post oder über das Internet an. Die Anmeldung dauert
nur wenige Minuten und spart Ihnen viel Geld.
Per Post
mit dem beiliegenden Anmeldeformular und Briefumschlag.
Internet
www.marcrist.com/registration
30-TAGE-GELD-ZURÜCK-GARANTIE
Sollten Sie mit der Leistung Ihrer Bohrmaschine oder Bohrständer nicht total zufrieden sein, können
Sie diese unter Vorlage des Original-Kaufbeleges innerhalb von 30 Tagen in ihrer
Originalverpackung, die für den Wiederverkauf geeignet ist, an Ihren Marcrist-Händler
zurückgeben und erhalten Ihr Geld zurück. Der Original-Kaufbeleg muss vorgelegt werden.
LEBENSLANGE HERSTELLERGARANTIE
Wenn Ihre Bohrmaschine oder Bohrständer aufgrund von fehlerhaftem Material oder mangelhafter
Ausführung Fehler aufweist, garantieren wir den kostenlosen Ersatz aller fehlerhaften Teile oder,
nach freiem Ermessen, den kostenlosen Umtausch des Gerätes unter der Voraussetzung, dass:
• der Original-Kaufbeleg vorgelegt wird und das Produkt angemeldet wurde
• der Fehler nicht auf normalen Verschleiß zurückzuführen ist
• das Produkt nicht missbräuchlich benutzt und regelmäßig gewartet wurde
• ausschließlich professionelle Qualitätsteile verwendet wurden, mit denen harte Materialien
gebohrt werden können
• Reparaturen nicht von unbefugten Personen durchgeführt wurden
5 JAHRE GRATIS-SERVICE*
Ihre Bohrmaschine und/oder Bohrständer von Marcrist ist für einen langjährigen Betrieb
mit minimaler Wartung vorgesehen.
Ein zufriedenstellender und sicherer Dauerbetrieb hängt jedoch von guter Pflege und
DDM3-230:Layout 1 11/03/2010 09:19 Page 20