MARLOE CHERWELL User manual

Cherwell Owner’s Guide
01

Marloe Watch Company
Welcome
Thank you for choosing the Cherwell
by Marloe Watch Company.
The Cherwell is the embodiment of countless
hours spent pouring over every tiny detail down to
the micrometer. We’re delighted with the result: a
mechanical machine, worn on the wrist, powered
by you, to display the passing of time - a feat of
such engineering marvel that we think everyone
should celebrate it.
Now it’s over to you to keep your Cherwell ticking
- the power of the mainspring, steadily released
over 50 hours, comes directly from you with each
turn of the crown. We hope you get as much
enjoyment from owning, wearing and using your
Cherwell as we have had creating it.
To the future, and whatever it may hold.
Oliver & Gordon
3

07 - Winding your Cherwell
09 - Seing the Time
11 - Caring, Maintenance & Warranty
The Cherwell is a contemporary take on a
traditional timepiece.
Specification:
43.4mm diameter x 12mm high
20mm lug width - 48mm top to toe
Hand-wound movement - 21,600bph
50+ hours Power Reserve
Double-domed Sapphire
Exhibition case-back
Multi-layered dial
3ATM
First Published October 2016
© Marloe Watch Company Ltd
Welcome to your Cherwell
5

Winding your Cherwell
Inside your Cherwell timepiece is a manual, hand-
winding, mechanical movement. Each movement
is powered by your touch, each turn of the crown
fuelling your Cherwell.
Winding your Cherwell every day keeps it ticking.
The necessity to wind your watch may at first be
unfamiliar, but soon enough you will find winding
your watch in the morning before you head out to
the hustle and bustle, or at night just before you
get that well earned shut eye, becomes part of
your daily routine.
Wind confidently until you feel the crown
bouncing back in your fingers. Once this starts
happening take it slower until you feel a firmer
resistance and then stop. This feeling of resistance
is the Mainspring within your Cherwell coiling up
tighter and tighter. Try not to wind so much that
the crown comes to a hard stop - this will damage
your watch over time if repeatedly wound to this
hard stop point.
This full charge will keep your Cherwell ticking for
over 50 hours. Quite amazing considering it’s just
a spring uncoiling itself slowly. Genius.
Wind your Cherwell in a CLOCKWISE direction. The
Marloe “M” engraving should be as above, right way up.
Don’t worry - winding the crown in the opposite
direction won’t damage the movement, and it will sound
prey similar to actually winding it, but the only way to
charge your Cherwell is to wind it clockwise.
7

Seing the Time
Position A
This is when the crown is fully in, hard against
the case. This is the position for winding your
Cherwell. Turn the crown CLOCKWISE to wind
your Cherwell.
Position B
Pulling the crown out from the case will
engage the time-seing mechanism within the
movement. It might take a lile firm pull to lever
the crown away from the case, but try not to
pull too hard. The crown won’t come o but it’s a
threaded part and will give way if forced.
Once the crown is in position B you can set the
time by turning the crown either clockwise or anti-
clockwise. Once the time is set push the crown
back towards the case firmly - you will feel a nice
click indicating the stem (the threaded part the
crown is aached to) has disengaged from the
time-seing mechanism and is now engaged back
in the winding mechanism.
A
B
9

Caring for your Cherwell
Maintenance
Warranty
Your Cherwell is made from strong stu.
Sapphire Crystal is almost as hard as Diamonds.
Stainless Steel 316L is Marine Grade. However
your Cherwell isn’t marine grade waterproof - in
fact it’s best to keep your Cherwell away from
any form of water. Splashes are OK from hand
washing, but dunk in water and you will damage it.
To keep everything nice and shiny use a new
microfibre cloth and gently polish away any
fingerprints and dirt. Do not use any abrasive or
chemical cleaning products. If you are prone to
geing scratches on your watches, a lile polish
with something like a Cape Cod cloth will remove
the smaller scratches with ease.
A damp cloth is acceptable for more stubborn dirt.
A mechanical movement, like a car engine, uses
oils to lubricate all the moving parts. Over time
this fine grade of oil can become gloopy, causing
your movement to begin losing accuracy and
generally bogging things down. Every 4-5 years
think about having your watch cleaned and
re-oiled by any professional watch service and
repair shop - it’ll keep everything ticking nicely.
Marloe Watch Co. oers a 1-year limited warranty
on all watches which covers manufacturing
defects. The warranty does not cover damages
that may occur from normal wear and tear and
everyday use.
If you have a warranty claim please contact us.
11

© Marloe Watch Company Ltd
www.marloewatchcompany.com
[e-mail]