Maykke YJA1010101 User manual

and Warranty Guide
www.maykke.com
Wall Bars
Installation
YJA1010101 YJA1010102

REV. 09052017
INSTALLATION AND CARE GUIDEwww.maykke.com
INSTALLATION AND WARRANTY GUIDE
Parts Included
PRE-INSTALLATION
Tools Required
Safety goggles Phillips
screwdriver
Drill
Level
NOTICE: Do not change or modify the product in any way. Doing so may compromise the
products structural integrity and will void the warranty.
NOTICE: Installation instructions must be followed. Any diversions from the installations
instructions may risk property damage and will void the warranty.
IMPORTANT:
Observe all state and local building codes.
由
6 sets
A B
WARNING:
Anchors are only to be used when installing into drywall. If you are installing into a wood beam do not
use the anchors. If you are installing on ceramic tiles or any surface other than drywall, please consult
your local home improvement store.

REV. 09052017INSTALLATION AND CARE GUIDEwww.maykke.com
INSTALLATION AND WARRANTY GUIDE
1. Mark your desired position on the wall, using a
drill, drill pilot holes.
2. Insert the plastic wall anchors (part A) into the holes,
making sure the anchor and the wall are even.
3. Rotate the cover plate to reveal the first hole in the
mounting bracket, line these holes to the pilot hole in
the wall. Insert a screw and tighten. (repeat six times)

REV. 09052017INSTALLATION AND CARE GUIDEwww.maykke.com
INSTALLATION AND WARRANTY GUIDE
For warranty information please check www.maykke.com
For customer service concerns please email: [email protected]
4. Press the plate cover close to the wall and rotate it
clockwise to lock.