Maytag BRAVOS User manual

1
BRAVOS®AUTOMATIC WASHER
USE & CARE GUIDE
LAVEUSE AUTOMATIQUE
BRAVOS®
GUIDE D’UTILISATION ET D’ENTRETIEN
PARA OBTENER ACCESO AL MANUAL DE USO Y CUIDADO EN ESPAÑOL, O PARA OBTENER INFORMACIÓN ADICIONAL ACERCA DE SU PRODUCTO, VISITE: WWW.MAYTAG.COM.
TENGA LISTO SU NÚMERO DE MODELO COMPLETO. PODRÁ ENCONTRAR EL NÚMERO DE MODELO Y DE SERIE EN LA ETIQUETA UBICADA DEBAJO DE LA TAPA DE LA LAVADORA.
W10092788A
FOR QUESTIONS ABOUT FEATURES, OPERATION/PERFORMANCE,
PARTS, ACCESSORIES OR SERVICE CALL: 1.800.688.9900
IN CANADA, CALL: 1.800.807.6777
VISIT OUR WEBSITE AT WWW.MAYTAG.COM
IN CANADA, WWW.MAYTAG.CA
AU CANADA, POUR ASSISTANCE, INSTALLATION OU SERVICE,
COMPOSER LE : 1.800.807.6777
OU VISITER NOTRE SITE INTERNET À
WWW.MAYTAG.CA

2
TABLE DES MATIÈRES
SÉCURITÉ DE LA LAVEUSE ................................................................................................ 27
EXIGENCES D’INSTALLATION .......................................................................................... 28
Outillage et pièces.......................................................................................................... 28
Exigences d’emplacement............................................................................................... 29
Système de vidange ........................................................................................................ 30
Spécications électriques................................................................................................ 30
INSTRUCTIONS D’INSTALLATION................................................................................... 31
Avant de commencer...................................................................................................... 31
Retrait de la base d’expédition et de l’anneau d’emballage............................................. 32
Raccordement du tuyau de vidange................................................................................ 32
Raccordement des tuyaux d’alimentation........................................................................ 33
Immobilisation du tuyau de vidange ............................................................................... 34
Réglage de l’aplomb de la laveuse .................................................................................. 35
Achever l’installation ...................................................................................................... 36
AVANTAGES ET CARACTÉRISTIQUES................................................................................ 36
Avantages ....................................................................................................................... 36
Caractéristiques .............................................................................................................. 37
UTILISATION DE LA LAVEUSE .......................................................................................... 38
Mise en marche de la laveuse ......................................................................................... 38
Pause ou remise en marche de la laveuse........................................................................ 39
Arrêt de la laveuse .......................................................................................................... 40
Changement des programmes, modicateurs, et options................................................. 40
Témoins lumineux........................................................................................................... 40
Programmes.................................................................................................................... 41
Modicateurs.................................................................................................................. 43
Options........................................................................................................................... 43
Fonctionnement des commandes.................................................................................... 43
Sons normaux ................................................................................................................. 44
CONSEILS DE LESSIVAGE.................................................................................................. 44
ENTRETIEN DE LA LAVEUSE.............................................................................................. 45
Nettoyage de la laveuse .................................................................................................. 45
Tuyaux d’arrivée d’eau.................................................................................................... 46
Précautions à prendre avant les vacances, un entreposage, ou un déménagement .......... 46
DÉPANNAGE ..................................................................................................................... 47
La laveuse et ses composants .......................................................................................... 47
Fonctionnement de la laveuse......................................................................................... 49
Soin des vêtements ......................................................................................................... 50
ASSISTANCE OU SERVICE................................................................................................. 53
Aux États-Unis ................................................................................................................ 53
Au Canada...................................................................................................................... 53
Accessoires..................................................................................................................... 53
GARANTIE......................................................................................................................... 55
TABLE OF CONTENTS
WASHER SAFETY ................................................................................................................. 3
INSTALLATION REQUIREMENTS ........................................................................................ 4
Tools and Parts .................................................................................................................. 4
Location Requirements ..................................................................................................... 5
Drain System .................................................................................................................... 6
Electrical Requirements..................................................................................................... 6
INSTALLATION INSTRUCTIONS......................................................................................... 7
Before You Start................................................................................................................. 7
Remove Shipping Base and Packing Ring.......................................................................... 7
Connect Drain Hose ......................................................................................................... 8
Connect the Inlet Hoses.................................................................................................... 8
Secure the Drain Hose.................................................................................................... 10
Level the Washer ............................................................................................................ 10
Complete Installation ...................................................................................................... 11
BENEFITS AND FEATURES................................................................................................. 12
Benets........................................................................................................................... 12
Features .......................................................................................................................... 12
WASHER USE..................................................................................................................... 13
Starting Your Washer ....................................................................................................... 13
Pausing or Restarting the Washer..................................................................................... 14
Stopping the Washer....................................................................................................... 15
Changing Cycles, Modiers, and Options ....................................................................... 15
Status Lights.................................................................................................................... 15
Cycles............................................................................................................................. 15
Modiers ........................................................................................................................ 17
Options........................................................................................................................... 17
Operating Controls ......................................................................................................... 18
Normal Sounds ............................................................................................................... 18
LAUNDRY TIPS .................................................................................................................. 18
WASHER CARE .................................................................................................................. 19
Cleaning Your Washer..................................................................................................... 19
Water Inlet Hoses ........................................................................................................... 19
Vacation, Storage, and Moving Care ............................................................................... 19
TROUBLESHOOTING ....................................................................................................... 20
Washer and Components................................................................................................ 20
Washer Operation........................................................................................................... 22
Clothing Care.................................................................................................................. 23
ASSISTANCE OR SERVICE.................................................................................................. 25
In the U.S.A. ................................................................................................................... 25
In Canada ....................................................................................................................... 25
Accessories..................................................................................................................... 25
WARRANTY....................................................................................................................... 26

3
WASHER SAFETY

4
Gather the required tools and parts before starting installation. The parts supplied are in the
washer basket. Tools needed for connecting the drain hose and water inlet hoses:
Pliers that open to 19⁄16" (3.95 cm) Flashlight (optional)
NOTE: Replace inlet hoses after 5 years of use to reduce the risk of hose failure. Record hose
installation or replacement dates for future reference.
INSTALLATION REQUIREMENTS
Tools and Parts

5
Parts supplied:
A
A. Drain hose form
B. Water inlet hoses (2)
C. Flat water inlet hose washers (4)
D. Beaded tie strap
B C D
Tools needed for securing the drain hose and leveling the washer:
Adjustable or open end
wrench 9⁄16" (14 mm) Wood block
Ruler or measuring tape
Level
Alternate parts
Your installation may require additional parts. If you are interested in purchasing one of the
items listed here, call the toll-free number on the cover or in the “Assistance or Service”
section.
If You Have: You Will Need to Buy:
Laundry tub or standpipe
taller than 96" (2.4 m) Sump pump system (if not already available)
1" (2.5 cm) diameter
standpipe 2" (5 cm) diameter to 1" (2.5 cm) diameter standpipe adapter, Part Number 3363920 and connector kit, Part
Number 285835
Overhead sewer Standard 20 gal. (76 L) 39” (99.0 cm) tall drain tub or
utility sink, sump pump and connectors (available from
local plumbing suppliers)
Floor drain Siphon break, Part Number 285834; additional drain hose,
Part Number 8318155 and connector kit,
Part Number 285835
Water faucets beyond reach
of ll hoses 2 longer water ll hoses: 6 ft (1.8 m), Part Number 76314,
10 ft (3.0 m), Part Number 350008
Lint clogged drain Drain protector, Part Number 367031
Location Requirements
Selecting the proper location for your washer improves performance and minimizes noise and
possible washer “walk.”
Your washer can be installed in a basement, laundry room, closet, or recessed area. See
“Drain System.”
IMPORTANT: Do not install or store the washer where it will be exposed to the weather.
Proper installation is your responsibility.
You will need:
A water heater set to deliver 120°F (49°C) water to the washer.
A grounded electrical outlet located within 4 ft (1.2 m) of where the power cord is
attached to the back of the washer. See “Electrical Requirements.”
Hot and cold water faucets located within 3 ft (90 cm) of the hot and cold water ll valves,
and water pressure of 20-100 psi (138-690 kPa) for best performance.
A level oor with a maximum slope of 1" (2.5 cm) under entire washer. Installing the
washer on carpeting is not recommended.
A sturdy oor to support the washer weight (washer, water, and load) of 315 lbs (143 kgs).
Do not store or operate your washer in temperatures at or below 32°F (0°C). Some water can
remain in the washer and can cause damage in low temperatures. See “Washer Care” for
information on winterizing.
Installation spacing for recessed area and closet installations
The following spacing dimensions are recommended for this washer. This washer has been
tested for installation with spacing of 0" (0 cm) clearance on the sides. Recommended spacing
should be considered for the following reasons:
Additional spacing should be considered for ease of installation and servicing.
Additional spacing should be considered on all sides of the washer to reduce noise transfer.
For closet installation with a door, minimum ventilation openings in the top and bottom of
the door are required. Louvered doors with equivalent ventilation openings are acceptable.
Companion appliance spacing should also be considered.
ABC
3"*
(7.6 cm)
3"*
(7.6 cm)
17"*
(43.2 cm)
1"
(2.5 cm)
A. Front view B. Side view C. Closet door with vents
271⁄2"
(69.9 cm)
1"
(2.5 cm)
1"*
(2.5 cm)
27"
(68.6 cm)
5"*
(12.7 cm)
14"* max.
(35.6 cm) 48 in.2*
(310 cm2)
24 in.2*
(155 cm2)
*Required spacing

6
Drain System
The washer can be installed using the standpipe drain system (oor or wall), the laundry tub
drain system, or the oor drain system. Select the drain hose installation method you need.
See “Tools and Parts.”
Standpipe drain system—wall or oor (views A & B)
The standpipe drain requires a minimum diameter standpipe of 2" (5.0 cm). The minimum
carry-away capacity can be no less than 17 gal. (64 L) per minute. A 2" (5.0 cm) diameter to
1" (2.5 cm) diameter standpipe adapter kit is available. See “Tools and Parts.”
The top of the standpipe must be at least 39" (99.0 cm) high and no higher than
96" (244.0 cm) from the bottom of the washer.
A B
39"
(99 cm)
Laundry tub drain system (view C)
The laundry tub needs a minimum 20 gal. (76 L) capacity. The top of the laundry tub must be
at least 39" (99.0 cm) above the oor and no higher than 96" (244.0 cm) from the bottom of
the washer.
Floor drain system (view D)
The oor drain system requires a siphon break that may be purchased separately. See “Tools
and Parts.”
The siphon break must be a minimum of 28" (71.0 cm) from the bottom of the washer.
Additional hoses might be needed.
C D
28"
(71 cm)
39"
(99 cm)
Electrical Requirements
A 120 volt, 60 Hz., AC only, 15- or 20-amp, fused electrical supply is required. A time-
delay fuse or circuit breaker is recommended. It is recommended that a separate circuit
serving only this appliance be provided.
This washer is equipped with a power supply cord having a 3 prong grounding plug.
To minimize possible shock hazard, the cord must be plugged into a mating, grounded
3 prong outlet, grounded in accordance with local codes and ordinances. If a mating
outlet is not available, it is the personal responsibility and obligation of the customer to
have the properly grounded outlet installed by a qualied electrician.
If codes permit and a separate ground wire is used, it is recommended that a qualied
electrician determine that the ground path is adequate.
Do not ground to a gas pipe.

7
Check with a qualied electrician if you are not sure the washer is properly grounded.
Do not have a fuse in the neutral or ground circuit.
INSTALLATION INSTRUCTIONS
Before You Start
NOTE: To avoid oor damage during installation, set the washer onto cardboard before
moving across oor.
IMPORTANT:
Be sure the foam shipping base has been removed from the bottom of the washer as
directed in the Unpacking Instructions.
If foam shipping base has not been removed, be sure lid is secured with tape before laying
washer on its back.
Removing the foam shipping base is necessary for proper operation.
Remove Shipping Base and Packing Ring
1. Place cardboard supports from shipping carton on oor behind washer for support.
2. Secure the lid with tape.
3. Using 2 or more people, tip the washer onto its back and place on cardboard supports.
4. Remove foam shipping base.
5. Set washer upright.
6. Remove tape from lid. Open lid and remove foam packing ring from washer tub.
Keep foam packing ring in case you need to move the washer in the future.

8
Connect Drain Hose
Proper connection of the drain hose protects your oors from damage due to water leakage.
Read and follow these instructions.
The drain hose is connected to your washer and is stored inside the washer cabinet.
Remove drain hose from washer cabinet
Pull the corrugated drain hose out of the washer by rst grabbing the pull tie. Continue to
pull the hose until the end emerges. Do not force excess drain hose back into the rear of
the washer.
Laundry tub drain or standpipe drain
Connecting the drain hose form to the corrugated drain hose
A
4.5"
(11.4 cm)
A. Drain hose reliefs
1. Feed end of drain hose into one end of form. Place end of drain hose
form into the drain hose relief.
2. Bend the hose over the top of the form and feed into the other end of
the form. Attach the other end of the form into the drain hose relief.
The hose must extend 41⁄2"(11.4 cm) beyond the form.
To keep drain water from going back into the washer:
Do not force excess drain hose into standpipe. Hose should be secure but loose enough
to provide a gap for air.
Do not lay excess hose on the bottom of the laundry tub.
Floor drain
Do not install the drain hose form onto the corrugated drain hose. You may need additional
parts. See Floor drain under “Tools and Parts.”
Connect the Inlet Hoses
1. Insert new at washers (supplied) into each end of the inlet hoses. Firmly seat the washers
in the couplings.
A
A. Coupling
B. Washer
B

9
Connect the inlet hoses to the water faucets
Make sure the washer basket is empty.
2. Attach the hose labeled hot to the hot water faucet. Screw on coupling by hand until it is
seated on the washer.
3. Attach the hose labeled cold to the cold water faucet. Screw on coupling by hand until it
is seated on the washer.
4. Using pliers, tighten the couplings with an additional two-thirds turn.
Tighten the couplings with an additional two-thirds turn.
NOTE: Do not over tighten or use tape or sealants on the valve. Damage to the valves
can result.
Clear the water lines
Run water through both faucets and inlet hoses, into a laundry tub, drainpipe, or bucket,
to get rid of particles in the water lines that might clog the inlet valve screens.
Check the temperature of the water to make sure that the hot water hose is connected to
the hot water faucet and that the cold water hose is connected to the cold water faucet.
Connect the inlet hoses to the washer
A
A. Hot water inlet valve
B. Cold water inlet valve
B
1. Attach the hot water hose to the inlet valve labeled hot.
2. Attaching one hose coupling rst makes it easier to tighten the connection with pliers.
3. Screw on coupling by hand until it is seated on the washer.
COLD
HOT
4. Using pliers, tighten the coupling an additional two-thirds turn.
NOTE: Do not overtighten or use tape or sealants on the valve. Damage to the valves
can result.
COLD
HOT
5. Attach the cold water hose to the inlet valve labeled cold.
6. Screw on coupling by hand until it is seated on the washer.
7. Using pliers, tighten the coupling an additional two-thirds turn.
NOTE: Do not overtighten or use tape or sealants on the valve. Damage to the valves
can result.

10
Check for leaks
Turn on the water faucets and check for leaks. A small amount of water might enter the
washer. You will drain this in a later step.
NOTE: Replace inlet hoses after 5 years of use to reduce the risk of hose failure. Record
hose installation or replacement dates for future reference.
If you connect only one water hose, you must cap off the remaining water inlet port.
Periodically inspect and replace hoses if bulges, kinks, cuts, wear, or leaks are found.
Secure the Drain Hose
1. Drape the power cord over the console.
2. Remove any cardboard used to move washer.
Beaded tie strap
3. Fasten the drain hose to the laundry tub leg or drain standpipe with the beaded tie strap.
See view A or B.
CBA
If the washer faucets and the drain standpipe are recessed, put the formed end of the drain
hose into the standpipe. Tightly wrap the tie strap around the water inlet hoses and the
drain hose. See view C.
Level the Washer
One washer foot has been installed at a different height on your new washer. The other
three feet were preset at the factory. Properly leveling your washer will minimize noise
and vibration.
1. Slide the washer to its nal location.
2. Push on upper front panel to be sure the washer is on its rear feet.
3. Lower right front foot until it contacts the oor. By hand, rmly rotate foot as much as an
additional 1½ turns. The other three feet have been preset at the factory.
4. Check the levelness of the washer by rst placing a level on the lid near the console.
Level the front.

11
5. Next, place the level on the side of the washer in the crease between the top of the
washer and the cabinet.
Level the side.
6. If the washer is not level, move the washer out slightly, tip back, prop up the front of the
washer on a wood block. Adjust the feet up or down as necessary by twisting the feet.
Repeat steps 1 through 5 until washer is level.
7. Use a 9⁄16" or 14 mm open-end wrench to turn the locknut counterclockwise on the foot
tightly against the washer cabinet.
IMPORTANT: If the locknut is not tight against the washer cabinet, the washer may
vibrate.
Complete Installation
1. Check the electrical requirements. Be sure that you have the correct electrical supply and
the recommended grounding method. See “Electrical Requirements.”
2. Check that all parts are now installed. If there is an extra part, go back through the steps
to see which step was skipped.
3. Check that you have all of your tools.
4. Keep the foam packing ring from the washer tub for future relocation of the washer.
Dispose of/recycle all packaging materials.
5. Check that the water faucets are on.
6. Check for leaks around faucets and inlet hoses.
7. Plug into a grounded 3 prong outlet.
8. Remove any protective lm or tape remaining on the washer.
9. Read “Washer Use.”
10. To test and to clean your washer, measure 1⁄2of the detergent manufacturer’s
recommended amount of High Efciency (HE) powdered or liquid detergent for a medium-
size load and pour it into the detergent dispenser. Close the lid. Press
POWER/CANCEL. Select a normal cycle and press START/PAUSE. Allow it to complete
one whole cycle.

12
Benets
High-Efciency Wash System
Your new top loading, high-efciency washer saves you time by allowing you to do fewer,
larger loads. It also conserves resources and lowers your water and energy bills by using the
following innovations.
INTELLIFILL™ Water Level Control
This washer senses the load size and composition through a series of lls and wash motion.
It then adjusts the water level for the best cleaning and rinsing performance. It eliminates the
guesswork. The water level is just right for every wash load size.
NOTE: You may notice during a cycle that the wash load is not completely submerged in
water. This is normal for your washer.
Auto Temperature Control
The Auto Temperature Control system on this washer electronically senses and maintains
a uniform water temperature by regulating incoming water temperatures. Using Auto
Temperature Control will help dissolve detergent.
Washer Impeller System
Your new washer works differently than most washers that you may be accustomed to. The
most striking difference is that the washer has a washer impeller system. It uses this new
innovative washer impeller at the bottom of the wash basket to move your load through a
mixture of water and detergent. The load is moved from the outside toward the middle with
items coming up in the center and down on the outside edges.
Dispensers
The dispensers make your washer truly automatic. It is unnecessary for you to return to the
washer during the cycle to add detergent, bleach, or fabric softener.
Laundry products are added to the load at the proper time in the wash cycle.
Spin Speeds
This washer is preset to automatically select the spin speed based on the cycle selected.
Depending on your wash load, you can change the preset speeds. The spin speed on this
washer is nearly twice as fast as that of a conventional washer. You may notice different
sounds during a spin cycle because of this higher speed.
High Efciency (HE) Detergent
This washer is designed for High Efciency (HE) detergent use only. HE detergents are made to
produce the right amount of suds and give the best performance in low water wash systems.
Features
Innovative Features
Your new washer includes these features that help to reduce noise, increase the ease of use,
and improve wash performance.
Electronic Controls
Electronic controls with preset cycles are easy to use whether you are a beginner or an
“expert.”
Quiet Operation
This washer is insulated with sound-dampening materials to reduce washer operation sounds
and noises.
Suspension System
To reduce washer “vibration,” “walk,” and “out of balance” conditions, your new washer
combines:
4 Spring damper struts to isolate vibration
Balance ring at the top and bottom of the wash basket to minimize vibration
Operating software designed to sense and correct off-balance loads
Clean Washer with AFFRESH™Cycle
This washer features an easy-to-use Clean Washer with AFFRESH™cycle that thoroughly
cleans the inside of your washing machine using higher water volumes in combination with
AFFRESH™ washer cleaner or liquid chlorine bleach. The use of AFFRESH™washer cleaner or
liquid chlorine bleach with this cycle, will remove and help avoid odor-causing residue.
Stainless Steel Basket
The stainless steel basket is corrosion resistant and enables higher spin speeds for more water
extraction, reducing drying time.
Self-clean Wash and Rinse Filter System
This washer lters 100% of the wash and rinse water. The water is ltered then recirculated.
The force lter traps sand and dirt, ushing them down the drain, so they are not redeposited
onto the clean clothes.
End Signal - Off - Low - Hi
The End Signal produces an audible sound when the wash cycle is nished. This signal is
helpful when you are removing items from the washer as soon as it stops.
Water Save Spray Rinse
This washer is designed to have the option of saving water by using a spray rinse instead of a
deep water rinse. This option is the default setting on some cycles. The option is selectable on
other cycles. When using fabric softener, always select the Fabric Softener button, or select
Extra Rinse; both of these options will dispense fabric softener in a deep rinse.
BENEFITS AND FEATURES
Your washer has several benets and features which are summarized here. Some items may not apply to your model.

13
Starting Your Washer
WARNING: To reduce the risk of re, electric shock, or injury to persons, read the
IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.
The following is a guide to starting your washer. Periodic references to other sections of this
manual provide more detailed information.
Your Maytag Washer is equipped with an “Auto Wake-up” feature. Press any button
or open and close the washer lid, and the display will illuminate. The washer will
automatically shut down if a cycle is not selected and started right away.
Your Maytag Washer will memorize and save all options and modiers that have been
changed during setting mode (exceptions apply to options for Super Wash, Rapid Wash,
and Normal cycles. They will default back to factory default settings.)
Using the Proper Detergent
Use only High Efciency detergents. The package for this type of detergent will be marked
“HE” or “High Efciency.” This wash system, along with less water, will create too much
sudsing with a regular non-HE detergent. Using regular detergent will likely result in washer
errors, longer cycle times, and reduced rinsing performance. It may also result in component
failures and noticeable mold or mildew. HE detergents are made to produce the right amount
of suds for the best performance. Follow the manufacturer’s instructions to determine the
amount of detergent to use. Remember, concentrated detergents such as 2x or higher will use
less detergent based on load size.
WASHER USE
NOTE: Your washer model may vary from the model shown.

14
1. Place a load of sorted clothes into the washer. See “Laundry Tips.”
Load evenly to maintain washer balance. Mix large and small items. Items should
move easily through the wash water.
Load only to the top of the basket as shown. Overloading can cause poor cleaning.
Items need to move easily through the wash water.
2. Pour measured powdered or liquid High Efciency (HE) detergent into the High Efciency
detergent dispenser. Always use the detergent dispenser, and do not put detergent directly
onto clothes in the washer.
H
i
g
h
E
f
f
i
c
i
e
n
c
y
D
e
t
e
r
g
e
n
t
Use Only
3. Add color-safe bleach (powdered or liquid) to this dispenser, if needed. Be sure to match
powdered color-safe bleach with powdered detergent or match liquid color-safe bleach
with liquid detergent.
4. Pour measured liquid chlorine bleach into the liquid bleach dispenser, if needed.
Bleach is diluted and automatically dispensed at the proper time during the wash cycle.
Do not overll. Do not dilute. Do not use more than 1 cup (250 mL) for a full load.
Use less with a smaller load size.
Follow the garment and the chlorine bleach manufacturer’s directions for proper use.
To avoid spilling, use a cup with a pouring spout. Do not let bleach splash, drip,
or run down into the washer basket.
At the end of the cycle, a small amount of water may be left in the dispenser.
This is normal.
NOTE: Use only liquid chlorine bleach in this dispenser.
5. Pour measured liquid fabric softener into the fabric softener dispenser, if desired.
If you are using fabric softener, be sure to select Fabric Softener from the options to
assure proper dispensing.
Do not overll. Do not dilute. The dispenser holds 3 oz (94 mL), or a capful
of fabric softener.
Fabric softener is dispensed in a deep rinse when the Fabric Softener option is selected.
If Extra Rinse is selected, the fabric softener will be dispensed during the nal rinse.
Do not use fabric softener dispensing balls in this washer. Dispensing balls will not
operate correctly with this washer.
Do not spill or drip any fabric softener onto the clothes.
At the end of the cycle, a small amount of water may be left in the dispenser.
This is normal.
NOTE: Use only liquid fabric softener in this dispenser.
6. Close the washer lid.
7. Select a Wash Cycle. See “Cycles.”
8. Select the desired Modiers. See “Modiers.”
9. Select an Option, if desired. See “Options.” Select Fabric Softener or Extra Rinse option
if you are using liquid fabric softener.
10. Select Delay Start, if desired. See “Delay Start” in the “Modiers” section.
11. Press START/PAUSE. The wash cycle begins, and the display shows the estimated
remaining time. The lid will lock.
NOTE: If you do not press Start/Pause within 5 minutes of pressing Power/Cancel, the
washer automatically shuts off.
Pausing or Restarting the Washer
Add a Garment
You can place additional clothing in the wash when the “Add a Garment” status light is
glowing without sacricing wash performance.
To add a garment or pause the washer at any time
1. Press START/PAUSE once.
2. Wait until the Lid Lock light turns off, then open the lid.
3. Add items.

15
To restart the washer
1. Close the lid and press START/PAUSE.
2. To unlock the lid after the Add a Garment period, press START/PAUSE once. Pressing
POWER/CANCEL will cancel the wash cycle.
Stopping the Washer
You can stop the wash cycle and drain the tub by pressing the Power/Cancel button once.
Changing Cycles, Modiers, and Options
You can change Cycles, Modiers, and Options anytime before Start/Pause is pressed. Not all
Modiers and Options are available for all cycles.
A short tone sounds when a change is selected. If you press and hold the End Signal option
for more than ve seconds, all valid beeps will be eliminated. To turn the signals back on,
press and hold the End Signal button for ve seconds.
Three short tones sound if an unavailable combination is selected. The last selection will
not be accepted.
To return all options and modiers to Factory Default, press POWER/CANCEL, select
Drain & Spin cycle, and then press Extra Rinse, Fabric Softener, Extra Rinse, or Fabric
Softener within 5 seconds. When done correctly, the 7-segment displays show “Fd” for
3 seconds and then unit returns to Standby Mode.
Changing Cycles after pressing Start
1. Press POWER/CANCEL once to cancel the cycle. The washer will drain.
2. Select the desired wash cycle.
3. Select the desired Modiers and Options.
4. Press START/PAUSE.
The washer restarts at the beginning of the new cycle.
NOTE: If you do not press Start/Pause within 5 minutes of pausing the washer, the washer
automatically shuts off.
Changing Modiers and Options after pressing Start/Pause
You can change a Modier or Option anytime before the selected Modier or Option begins
by choosing the desired Modiers and/or Options.
NOTE: An error tone will sound if your selection is unavailable.
To manually drain the washer and spin the load
1. Press POWER/CANCEL once to cancel the wash cycle and drain the washer.
2. Turn knob to select DRAIN & SPIN.
3. Press START/PAUSE.
When the spin is complete, the lid unlocks. Items can be removed from the washer.
Status Lights
These lights show which portion of the cycle is operating. They also indicate when you can
add other garments to the wash load.
Indicator lights
An indicator light shows which Cycle, Modiers, and Options you have selected.
Estimated Time Remaining
When a wash cycle is started, the estimated time remaining for the cycle, including lls and
drains, will be displayed. The time will count down to the end of the cycle.
Cycles
Turn the knob to choose the correct wash cycle for the type of fabrics you are washing. When
the knob points to a cycle, the cycle and Start/Pause indicator lights will blink. If the default
settings for the Modiers and Options are acceptable, you may press Start/Pause to begin the
wash cycle.
Preset Cycle Settings
For ease of use, preset cycle settings provide the recommended fabric care settings
for each cycle.

16
To use the preset cycle settings:
1. Press POWER/CANCEL.
2. Select the cycle you want by turning the knob. The preset cycle settings will be displayed
(see following chart).
NOTE: The preset times may vary slightly depending on your model.
3. Press START/PAUSE. The wash cycle will begin.
Preset Cycle Settings
Cycle Preset Minutes* Soil Level** Wash/Rinse Temp
Super Wash 1:04 Extra Heavy Hot/Cold
Whites 1:19 Extra Heavy Hot/Cold
Bulky 0:52 Heavy Warm/Cold
Sheets 0:49 Heavy Warm/Cold
Normal 0:41 Heavy Warm/Cold
Wrinkle Control 0:46 Medium Warm/Cold
Darks/Colors 0:45 Heavy Warm/Cold
Rapid Wash 0:33 Light Warm/Warm
Hand Wash 0:36 Light Cold/Cold
Clean Washer
with AFFRESH™1:01 Not applicable Not applicable
Soak 0:31 Light Cold/Cold
Rinse & Spin 0:24 Not applicable Cold/Cold
Drain & Spin 0:13 Not applicable Not applicable
*These times are for reference only and may not match your model exactly.
**Cycle time in hour and minutes will appear in the display while you are making selections.
The total cycle time will appear, including an estimated time for drain and ll times, once
Start/Pause is pressed.
NOTE: Load only to the top of the basket. Overloading can cause poor cleaning. See “Starting
Your Washer.”
IMPORTANT: When washing waterproof/water-resistant items such as plastic lined mattress
pads, shower curtains, tarps, jackets, or sleeping bags, select the lowest spin speed setting
available for the cycle and washer model being used.
Super Wash
Use this cycle for heavily soiled or sturdy items. Cycle combines high-speed wash action and
high-speed spin. See “Changing Cycles, Modiers, and Options.” A Water Save Spray Rinse is
a preset cycle setting for this cycle.
Whites
This cycle introduces liquid chlorine bleach to the load at the proper time for improved
whitening of your heavily soiled white fabrics. This cycle combines high-speed wash action
and high-speed spin speed. For maximum soil and stain removal, liquid chlorine bleach can
be used. Cycle can also be used for sturdy color fabrics such as towels without liquid chlorine
bleach.
Bulky
Use this cycle to wash large items such as comforters, sleeping bags, and blankets. This cycle
starts with a soak to thoroughly saturate your large load. This is followed by medium wash
action and medium spin speeds to maintain load balance.
Sheets
Use this cycle for sheets, pillowcases, and light blankets or throws. The wash action of this
cycle is designed to keep large items from tangling and balling up.
IMPORTANT: For best performance, drop items in loose heaps evenly around the basket wall.
Do not load items directly on the impeller for this cycle.
Normal
Use this cycle for normally soiled cottons and mixed fabric loads. This cycle combines high-
speed wash action and medium-speed spin. A Water Save Spray Rinse is a preset setting for
this cycle.
When washing waterproof/water-resistant items such as plastic lined mattress pads, shower
curtains, tarps, jackets, or sleeping bags, select the lowest spin speed setting available for the
cycle and washer model being used.
Wrinkle Control
Use this cycle to wash loads of no-iron fabrics such as sport shirts, blouses, casual business
clothes, permanent press, and blends. This cycle uses medium-speed wash action, a low-
speed spin, and a cool down process to help reduce wrinkling.
Darks/Colors
Use this cycle for lightly soiled, colored clothing or towels. This cycle uses medium-speed
wash action and medium-speed spin.
Rapid Wash
Use this cycle to wash small, lightly soiled loads that are needed in a hurry. This short cycle
combines high-speed wash action and high-speed spin for the optimal cleaning and shortened
dry times. A Water Save Spray Rinse is a preset cycle setting for this cycle.
Hand Wash
This cycle combines low-speed wash and low-speed spin action to clean items labeled as
“Machine Washable” on the garment care label.
Clean Washer with AFFRESH™
Use the Clean Washer with AFFRESH™cycle once a month to keep the inside of your washer
fresh and clean. This cycle uses a higher water level. Use with AFFRESH™washer cleaner
tablet or liquid chlorine bleach to thoroughly clean the inside of your washing machine. This
cycle should not be interrupted. See “Cleaning Your Washer.”
IMPORTANT: Do not place garments or other items in the washer during the Clean Washer
with AFFRESH™cycle. Use this cycle with an empty wash tub.
Soak
This cycle is preset for a 31-minute cycle and soak time can be adjusted according to your
needs by selecting Soil Level. After the selected soak period has ended, the washer will drain
but does not spin the load. At the end of Soak, the washer will drain and wait for a wash cycle
to be selected, to complete the cleaning process.

17
Rinse & Spin
Use this option to get a deep rinse followed by a high-speed spin. The time display will
include an estimate of how long it will take to ll and drain the washer.
When to use RINSE & SPIN:
For loads that need rinsing only.
For completing a cycle after the cycle has been cancelled.
Drain & Spin
Drain & Spin may help shorten drying times for some heavy fabrics or special-care items.
Drain & Spin may also be used for draining the washer after canceling a cycle.
Modiers
Modiers allow you to further customize your cycles and save energy.
Wash Temp/Rinse Temp
Select a water temperature based on the type of load you are washing. Use the warmest wash
water safe for fabrics. Follow garment label instructions.
Warm rinses leave the loads drier and more comfortable to handle than cold rinses. However,
warm rinses also increase wrinkling. Cold rinses may help with wrinkling and save energy.
Temperature Guide
Wash Water Temperature Suggested Fabrics
Hot Whites and pastels
Warm Bright colors
Cold Colors that bleed or fade
NOTE: In wash water temperatures colder than 60°F (15.6°C), detergents do not dissolve well.
Soils may be difcult to remove.
Spin Speed
This washer automatically selects the spin speed based on the cycle selected. The preset
speeds can be changed. Spin speeds may vary by cycle.
Soil Level
Soil Level (wash time) is preset for each wash cycle. See “Preset Cycle Settings” in “Cycles.”
As you press the Soil Level pad, the cycle time will increase or decrease in the Estimated Time
Remaining display and a different wash time will appear. To get the minimum wash time,
press the pad until the indicator light next to Light illuminates. This is the shortest wash time
available for that cycle with the wash options selected.
For most loads, use the time recommended in the preset cycle settings.
For heavy soil and sturdy fabrics, press Soil Level to select more wash time, if needed.
For light soil and delicate fabrics, press Soil Level to select less wash time, if needed.
Auto Temperature Control
Auto Temperature Control (ATC) electronically senses and maintains a uniform wash and rinse
water temperature. ATC regulates incoming hot and cold water. The ATC is automatically
turned On when a cycle is selected. (See “Preset Cycle Settings” in “Cycles.”)
ATC is available with Warm/Warm, Warm/Cold, and Cool/Cold settings. The water
temperature in the Hot/Cold and Cold/Cold settings depends on the water temperature at the
water inlet faucets.
ATC ensures consistent cleaning.
Heated water consumes the largest amount of energy that a washer uses.
Today’s detergents work well at temperatures above 60°F (15.6°C).
Options
Use these pads to select or deselect the options for your wash cycle. Options may add time
to the wash cycle.
Water Save Spray Rinse
The Water Save Spray Rinse option reduces rinse water in the cycle. This option is available
on most cycles and must be selected prior to the start of the cycle. Do not use liquid fabric
softener with the Water Save Spray Rinse option. Select the Fabric Softener option if using
liquid fabric softener to assure proper dispensing.
Fabric Softener
Fabric Softener option must be selected if liquid fabric softener is added to the fabric softener
dispenser. Fabric softener will also be dispensed in the last rinse of the Extra Rinse cycle, if
selected. This option ushes the dispenser at the correct time in a deep water rinse for optimal
distribution.
Extra Rinse
An Extra Rinse can be used to aid in the removal of detergent or bleach residue, or particulates
such as sand and lint, from the load. This option provides an additional rinse with the same
water temperature as the rst rinse. This is the preset rinse setting for the Whites cycle.
End Signal - Off - Low - Hi Cycle Volume
The End Signal produces an audible sound when the wash cycle is nished. This signal is
helpful when you are removing items from the washer as soon as it stops. Select Off, Low,
or Hi for volume sound.

18
Operating Controls
POWER/CANCEL
Press POWER/CANCEL to turn the washer on or off.
START/PAUSE
Press START/PAUSE to start your washer after a cycle has been selected. Be sure all desired
Modiers and Options have been selected. Press START/PAUSE once to unlock the lid and
add a garment. Press START/PAUSE to complete the cycle from where it was stopped. The
lid must be closed for the washer to start. Press POWER/CANCEL to stop the wash cycle.
The washer will then drain and turn off.
Mend tears, loose hems, and seams.
Treat spots and stains.
Stained or wet garments should be washed promptly for best results.
Turn wool and knits inside out before washing.
Sorting
Separate heavily soiled items from lightly soiled ones, even if they would normally
be washed together. Separate lint-givers (towels, chenille) from lint-takers (corduroy,
synthetics, permanent press). When possible, turn lint-givers inside out.
Separate dark colors from light colors, colorfast items from noncolorfast items.
Sort by fabric and construction (sturdy cottons, knits, delicate items).
Separate bulky, nonabsorbent items such as comforters, pillows, and poly-lled jackets.
Use the Bulky cycle for these items.
Separate sheets, pillowcases, and light blankets or throws and use the Sheets cycle for
these items. For best performance, drop items in loose heaps evenly around the basket
wall and do not load items directly on the impeller for this cycle.
When washing waterproof/water-resistant items such as plastic lined mattress pads, shower
curtains, tarps, jackets, or sleeping bags, select the lowest spin speed setting available for
the cycle and washer model being used.
Unloading
Remove clothes from washer after the cycle is completed. Metal objects such as zippers,
snaps, and buckles may rust if left in the washer basket for a long time.
Preparing clothes for washing
Follow these recommendations to help you prolong the life of your garments.
Use only High Efciency detergents. The package for this type of detergent will be marked
“HE” or “High Efciency.” This wash system, along with less water, will create too much
sudsing with a regular non-HE detergent. Using regular detergent will likely result in
washer errors, longer cycle times, and reduced rinsing performance. It may also result in
component failures and noticeable mold or mildew. HE detergents are made to produce
the right amount of suds for the best performance. Follow the manufacturer’s instructions
to determine the amount of detergent to use. Remember, concentrated detergents such as
2x or higher will use less detergent based on load size.
Use only “HE” High Efciency detergent.
Close zippers, snaps, and hooks to avoid snagging other items. Remove pins, buckles,
and other hard objects to avoid scratching the washer interior. Remove non-washable trim
and ornaments.
Empty pockets and turn them inside out.
Turn down cuffs; brush away lint and dirt.
Turn synthetic knits inside out to avoid pilling.
Tie strings and sashes so they will not tangle.
Lid Lock
When the Lid Lock status light glows, the washer lid is locked. The lid must be closed for the
washer to Start.
NOTE: You must wait until the Lid Lock Light turns off before the lid can be opened.
Normal Sounds
Your new washer may make sounds your old one didn’t. Because the sounds might be
unfamiliar, you may be concerned about them. These sounds are normal.
During washing
You will hear spin/spray noise throughout the cycle.
During drain
If water is drained quickly from your washer (depending on your installation), you may hear
air being pulled through the pump during the end of draining.
During wash and spin
This washer does not have a transmission. The motor provides direct drive for agitation and
spin. You will hear sounds that are different from those of a conventional washer.
LAUNDRY TIPS

19
WASHER CARE
Cleaning Your Washer
Washer Maintenance Procedure
This washer has a special cycle that uses higher water volumes, in combination with
AFFRESH™ washer cleaner or liquid chlorine bleach to thoroughly clean the inside
of the washer.
NOTES:
Read these instructions completely before beginning the cleaning process.
After every 45 cycles, the Clean Washer Reminder status light glows. Light can be
deactivated by running the Clean Washer with AFFRESH™ cycle or you can press the
Reminder Reset button and start the Clean Washer Reminder cycle count over again.
It is recommended that you allow the cleanout cycle to complete without interruptions. If
necessary, the cleanout cycle may be cancelled by pressing the Power/Cancel button once.
IMPORTANT: If the cleanout cycle is cancelled, run a Rinse & Spin cycle to ensure that all
remaining washer cleaner or bleach is rinsed from the washer.
Begin procedure
1. Open the washer lid and remove any clothing or items from the washer.
2. Using the AFFRESH™ washer cleaner (Recommended):
Add one AFFRESH™ washer cleaner tablet to the washer basket.
If using liquid chlorine bleach:
Add 1 cup (250 mL) liquid chlorine bleach to the bleach dispenser.
NOTE: Do not add any detergent or load to this cleaning cycle. Use of more than
1 cup (250 mL) of bleach will cause product damage over time.
3. Close the lid.
4. Turn Cycle Control knob to Clean Washer with AFFRESH™ cycle.
The Estimated Time Remaining display will show approximately 1:02.
5. Press START/PAUSE.
The cycle will begin and water will dispense in the washer for a moment and pause,
then the lid will lock and the cycle will continue.
Once the cleaning cycle has begun, allow the cycle to complete. An estimated cycle
time will appear on the display.
Always do the following to maintain washer freshness
Use only High Efciency (HE) detergent when washing a clothes load.
Repeat the cleaning procedure monthly, using one AFFRESH™ clean washer tablet
or 1 cup (250 mL) of liquid chlorine bleach.
If the procedure does not sufciently improve washer freshness, evaluate your
installation and usage conditions for other causes.
Cleaning the exterior
Use a soft damp cloth or sponge to wipe up any spills. Occasionally wipe the outside of your
washer to keep it looking new. Use mild soap and water. Do not use abrasive products.
Water Inlet Hoses
Replace inlet hoses after 5 years of use to reduce the risk of hose failure. Periodically inspect
and replace inlet hoses if bulges, kinks, cuts, wear, or leaks are found.
When replacing your inlet hoses, mark the date of replacement on the label with a permanent
marker.
Vacation, Storage, and Moving Care
Install and store your washer where it will not freeze. Because some water may stay in the
hoses, freezing can damage your washer. If storing or moving your washer during freezing
weather, winterize it.
Non-use or vacation care:
Operate your washer only when you are at home. If you will be on vacation or not using your
washer for an extended period of time, you should:
Unplug washer or disconnect power.
Turn off the water supply to the washer. This helps avoid unintended ooding (due
to a water pressure surge) while you are away.
To winterize washer:
1. Shut off both water faucets.
2. Disconnect and drain water inlet hoses.
3. Put 1 qt (1 L) of R.V.-type antifreeze in the basket.
4. Run washer on the Rinse & Spin setting for about 30 seconds to mix the antifreeze and
remaining water.
5. Unplug washer or disconnect power.

20
To use washer again:
1. Flush water pipes and hoses. Reconnect water inlet hoses. Turn on both water faucets.
2. Plug in washer or reconnect power.
3. Run the washer through the Bulky cycle to clean the washer and remove the antifreeze,
if used. Use only HE High Efciency detergent. Use 1/2the manufacturer’s recommended
amount for a medium-size load.
To transport the washer:
1. Shut off both water faucets.
2. Disconnect and drain water inlet hoses.
3. If the washer will be moved during freezing weather, put 1 qt (1 L) of R.V.-type antifreeze
in the basket. Run washer on the Rinse & Spin setting for about 30 seconds to mix the
antifreeze and remaining water.
4. Disconnect the drain from the drain system.
5. Unplug the power cord.
6. Place the inlet hoses into the basket.
7. Drape the power cord and drain hose over edge into the basket.
8. Place foam packing ring from the original shipping materials in the top of washer. If you
do not have the original foam packing ring, place heavy blankets, towels, etc. into basket
opening. Close the lid and put a piece of tape over the lid and down to the front of the
washer. Keep lid taped until the washer is placed into the new location.
Reinstalling the washer
1. Follow the “Installation Instructions” to locate, level, and connect the washer.
2. Run the washer through the Bulky cycle to clean the washer and remove the antifreeze,
if used. Use only HE High Efciency detergent. Use 1⁄2the manufacturer’s recommended
amount for a medium-size load.
TROUBLESHOOTING
First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions) to possibly avoid the cost of a service call.
In U.S.A. www.maytag.com/help In Canada www.maytag.ca
Washer and Components
Washer displaying code messages
 “LF” (Washer is taking too long to ll)
Check the following:
Are the hot and cold faucets turned on?
Are the water inlet hoses kinked or clogged?
Are the water inlet valve screens clear?
Press POWER/CANCEL to clear display.
 “Ld” (Washer is taking too long to drain water from the wash tub)
Check the following:
Is the drain hose kinked or clogged?
Is the drain hose installed properly? See “Connect the Drain Hose.”
Press POWER/CANCEL to clear display.
 “uL” (Unbalanced Load)
If the load is unbalanced, the washer will display this code while running an imbalanced
load correction routine at the end of the wash cycle and before the nal spin. If the code
remains and the wash cycle dial is ashing after the recovery routine has stopped, open lid
and redistribute the load. Close lid and press START/PAUSE.
 “oL” (Over Load)
Is the washer overloaded? The washer has attempted to ll and begin the wash cycle. If
the washer is overloaded, it will drain any water and detergent that was added during the
ll. To correct the overload, remove several items and add detergent. Close lid and press
START/PAUSE.
 “Sd” (Suds Detected)
Did you use regular detergent?
Regular or non-HE hand-washing detergents are not recommended for this washer.
Use only High Efciency (“HE”) detergent.