MB & F MOONMACHINE User manual

MOONMACHINE
FUNCTIONS
WINDING
TIME SETTING
MOON PHASE SETTING
05
07
09
11

MOONMACHINE FUNCTIONS
1. HOUR
2. MINUTE
3. MOON PHASE
3
2
1
05

MOONMACHINE OPERATING INSTRUCTIONS
1. WINDING
Your watch is equipped with an automatic movement
and a screwed-down crown.
If it has stopped, turn the crown anticlockwise to slide
the crown out (position 1) and wind the crown a few turns (clockwise).
Position 1 07

OPERATING INSTRUCTIONS
2. TIME SETTING
Turn the crown anticlockwise and slide it fully out (position 2).
Turn the crown to correct time.
09
09
MOONMACHINE
Position 2

OPERATING INSTRUCTIONS
3. MOON PHASE SETTING
To adjust the moon phase, gently position the supplied tool in
the corrector hole, which is located on the top of the case.
Warning: to avoid damaging the moon phase gear train,
do not adjust the moon phase between 8:00 pm and 3:00 am. 11
MOONMACHINE

WWW.MBANDF.COM - PRINTED IN SWITZERLAND - MARCH 2012