MDB Toddler bed (0810) User manual

Congratulations on purchasing a MDB Family product. This product will provide many years of service if
you adhere to the following guidelines for assembly, maintenance and operation. This product is for
residential use only. Any institutional use is strictly prohibited.
Please be sure to follow the instructions for proper assembly. Use a Phillips head screwdriver for assem-
bling the bed in addition to the Allen wrench included in the hardware box. Do not use power screwdrivers.
All of our products are made from natural woods. Please understand that natural woods have color
variations which are the result of nature and not defects in workmanship.
DO NOT SUBSTITUTE PARTS. ALL MODELS HAVE THE SAME QUANTITY OF PARTS AND HARD-
WARE. YOUR MODEL MAY LOOK DIFFERENT FROM THE ONE ILLUSTRATED DUE TO STYLISTIC
VARIATIONS.
Toddler bed (0810) - Assembly and Operation Manual
Page 1
Revised 27Jan2011
Unpack and separate all parts, bolts, screws and clip angles. All holes for attachment have been pre-drilled.
No drilling by the customer is necessary. Ask your store or call us for replacement of missing parts.
On the last page, record your model/item number, P.O. / lot number, date of purchase, store purchased
from and the finish color for future reference.
Please read the Caution and Warning Statements
insert before using your product.

READ ALL INSTRUCTIONS BEFORE ASSEMBLING THE PRODUCT.
Page 2
Tools Needed
(not included)
Phillips
screwdriver
HARDWARES
D. Barrel Nut X 24
A. 3” Machine Screw X 8 B. 2-1/2” Machine Screw X 12
C. 1-3/4” Machine Screw X 4
E.. Guard Rail Fastener X 2
F. 3/4” Wood Screw X 6
CRIB PARTS
G
H
I
J
K
L
M
N
O
G. Headboard
H. Lef t S ide P anel
I. Right S ide P anel
J. F ront Lef t Leg
K. F ront Right Leg
L. Cent er support Rail
M. S upport Rail X 6
N. F ront Rail
O. G uard Rail X 2

Page 3
D
D
D
D
D
D
D
D
D
D
STEP 1
STEP 2
D
E
F
A
Following the above illustration and assemble the toddler bed.
Installing the guard rail
Use two machine screws A and two
barrel nuts D, install the guard rail as
shown. You have the option of
installing the guard rail on either the
left or right side. The illustration to
the left shows the installation for the
left side of the toddler bed.
L. Center support Rail
G. Headboard
H. Left Side Panel
I. Right Side Panel
J. Front
Left Leg
K. Front
Right Leg
N. Front Rail
O. Guard Rail
M. Support Rail
KEEP THIS MANUAL IN A SAFE
PLACE FOR FUTURE REFERENCE.
*Check to make
sure that all of the
bolts are fastened
securely.

WARNING:
Registering your product is even easier than
before. You can register your product on our
website at : www.themdbfamily.com
IF YOU WOULD LIKE TO ORDER
REPLACEMENT OR MISSING PARTS
PLEASE VISIT US AT:
WWW.THEMDBFAMILY.COM
OR YOU CAN CONTACT US BY MAIL:
MDB FAMILY
855 WASHINGTON BLVD.
MONTEBELLO, CA 90640
ONE YEAR LIMITED WARRANTY:
We will replace any missing parts at the time of
purchase or any defective item within a one year
period from the date of original purchase.
Please keep your receipt so that we may
process your warranty request. This warranty
only covers new units with original packaging
and ownership, and is not transferable. It does
not cover any used, secondhand or demo
models.
This warranty does not cover any damaged or
defective parts that result from installation and
assembly, normal wear and tear, abuse, negli-
gence, improper use or alteration to the finish,
design, and hardware of the crib. The specific
legal rights of this warranty may vary from state
to state. Some states do not allow any exclusion
or limitation of incidental damages. Some States
do not allow limitation on how long an implied
warranty lasts.
Failure to follow these warnings and
the assembly instructions could
result in serious injury or death from
entrapment or strangulation.
!
WARNING :
The mattress intended for use on the bed shall be a full-size crib mattress having
minimum dimensions of 51-5/8 in. (1310mm) in length, 27-1/4 in. (690mm) in width
and 4 in. (100mm) in thickness, or a greater thickness not exceeding 6 in (152mm).
!
WARNING :
ENTRAPMENT/
STRANGULATION HAZARD
Infants have died in toddler beds from entrapment and
strangulation.
Failure to follow these warnings and the assembly
instructions could result in serious injury or death.
NEVER use bed with children under 15 months.
NEVER place bed near windows where cords from blinds
or drapes may strangle a child.
If guard rails are used as the mattress containment means,
guard rails provided must be used to avoid the formation of a
gap between the mattress and the bed that could cause an
entrapment.
DO NOT place bed near windows where cords from blinds
or drapes may strangle a child.
DO NOT place items with a string, cord, or ribbon, around
a child’s neck, such as a hood strings or pacifier cords.
DO NOT suspend strings over a toddler bed for any reason.
The intended user’s minimum age must be at
least 15 months old and maximum weight must not exceed 50 lbs (22.7 kg).
* Refer to cardboard box.
revised 25Jan11

Page 5
STEP 2
O. Guard Rail
Detach the section as shown
This will be your footboard for the
full size conversion.
Remove all other parts from the
headboard.
STEP 1
Install the second guard rail as
shown
Depending on where you initially
installed the first guard rail, the second
one will be installed opposite to it. The
illustration shows the second installed
to the right.
Once installed, you will have your
footboard for the full size bed.
STEP 3
With our rail kit (sold
separately), assemble the
headboard and footboard
as shown. Hardware is
included in the rail and
comes with 8 machine
bolts and 8 hex nuts.
* Please contact a retailer to order your full size adult wooden
bed rails for your full size bed conversion.
Toddler bed (0810) - Full Size Bed Conversion