MDB 5591 Installation and operating instructions

Revised 08JUL2011 page 1
Congratulations on purchasing a MDB Family product. This product will provide many years of service if
you adhere to the following guidelines for assembly, maintenance and operation. This product is for
residential use only. Any institutional use is strictly prohibited.
Please be sure to follow the instructions for proper assembly. Use a Phillips head screwdriver for assem-
bling the crib in addition to the Allen wrench included in the hardware box. Do not use power screwdrivers.
All of our products are made from natural woods. Please understand that natural woods have color
variations which are the result of nature and not defects in workmanship.
DO NOT SUBSTITUTE PARTS. ALL MODELS HAVE THE SAME QUANTITY OF PARTS AND HARD-
WARE. YOUR MODEL MAY LOOK DIFFERENT FROM THE ONE ILLUSTRATED DUE TO STYLISTIC
VARIATIONS.
!!PLEASE READ!!
Assembly of this furniture is easier with two people. Assemble furniture on debris free carpets or on the enclosed
foam sheets to prevent scratching of finish. Using any power tools to assemble this furniture may potentially strip
the wood. DO NOT OVERTIGHTEN SCREWS. DO NOT USE THE CHANGING TABLE IF IT IS DAMAGED OR
BROKEN.
WARNING!
!
READ ALL INSTRUCTIONS BEFORE USE OF THE CHANGING TABLE, ADD-ON
CHANGING UNIT, OR CONTOURED CHANGING PAD.
* The crib can later be converted
into a toddler bed or a full-size
bed. To convert to a toddler bed,
turn to page 16. To convert to a
full-size bed, turn to page 17.
Crib + Changer Combo (5591) - Assembly and Operation Manual

page 2
PARTS
L. Guardrail
K. Spring Frame
B. Front Panel
A. Back Panel
M. Drawer
Front (3)
N. Right Drawer
Panel (3)
O. Left Drawer
Panel (3)
P. Drawer
Back (3)
H. Crib Top Panel X 2
C. Right Side Panel D. Left Side Panel E. Center Panel
F-3. Back
Post
F-2. Left
Back Post
G-3. Front
Post
R. Dresser Back
Top Panel
F-1. Right
Back Post
G-1. Right
Front Post
G-2. Left
Front Post
Q. Drawer
Bottom
Board (3)

page 3
HARDWARE
Tools Needed
(not included)
Phillips
screwdriver
H1. 3 -1/2” Allen Head Bolt (8) H2. 2 -3/4” Allen Head Bolt (2)
H3. 2 -1/2” Allen Head Bolt (16) H4. 1 -3/4” Allen Head Bolt (8)
H5. 1” Allen
Head Bolt (4)
H6. Barrel
Nut (24)
H13. 1/2” Small Wood
Screw for Glides (36)
H14. 1-1/8” Bolt
for Knob (3)
H15. Knob (3)
H16. Right Panel Glide (3)
H17. Right Drawer Glide (3)
H18. Left Panel Glide (3)
H19. Left Drawer Glide (3)
H24. Allen
Wrench
GUARDRAIL HARDWARE
H22. 2” Allen Head Bolt (4) H23. Lock washer (4)
T. Dresser Front
Top Bar
S. Dresser Back
Panel
Z. Dresser
Top Board
U. Dresser Center
Bar (2)
X. Dresser Bottom
Bar (2)
W. Dresser Top
Bar
V. Dresser Middle
Bar (2)
H20. Strap
H21. Wood
Screw (2)
BB. Pad
H7. 1-1/4” Wood
Screw (24) H9. 1” Metal Pin (20)
Y. Dresser
Center Board
H25. Lock
washer (38)
H26. Washer (4) H27. 7/8" Wood
Screw (2)
AA-2. Dresser
Shelf (with pre-drilled
screw holes)
AA-1. Dresser
Shelf

page 4
STEP 1. Assemble all drawers
1A 1B
1C
1D 1E
H13
H13
H13
H13
H13
H13
H19. Left
Drawer
Glide
H17. Right
Drawer
Glide
Q. Drawer Bottom
Board
M. Drawer
Front
N. Right
Drawer
Panel
O. Left
Drawer
Panel
H7
H7
H7
H7
DO NOT OVERTIGHTEN.
P. Drawer Back
H7
H7
H7 H7
H15
H14

page 5
STEP 2. Attach posts to center panel
STEP 3. Attach panel glides and metal pins to center and right side panel
H6
H6
H1
H1
H2
H2
E. Center Panel
F-1. Right
Back Post
G-1. Right
Front Post
H16. Right Panel GlideH18. Left Panel Glide
H9
H9
H9
H13
H13
H13
H13
H13
H13
H18 H16
H9
H13
H13
H13
H13
H13
H13
E. Center Panel
C. Right Side Panel
DO NOT OVERTIGHTEN.
H25
H25
H25
H25

page 6
STEP 4. Attach dresser panels and
bars to right side panel
STEP 5. Attach dresser bars to
right side panel
T
W
X
X
S
R
H6
H6
H6
H6
H3
H3
H3
H4
H3
H4
H9
H9
H9
H9
U
U
V
V
H9
H9
C. Right Side Panel
DO NOT OVERTIGHTEN.
H25
H25
H25
H25
H25
H25

page 7
STEP 6. Attach dresser boards
to the dresser
STEP 7. Attach center panel to
the dresser
H6
H3 H4
H9
H3
H6
H9
H9
H9 H6
H9
H9
H3
H3 H4
H6
E. Center Panel
Z. Dresser Top Board
Y. Dresser
Center Board
DO NOT OVERTIGHTEN.
H25
H25
H25
H25
H25
H25

page 8
STEP 8. Attach posts to left side panel
STEP 9. Attach the crib top
panel and back panel
H1
H1
H1
H1
H1
H1
H6
H6
H6 H6
H6 H6
D. Left Side Panel
F-2. Left
Back Post
G-2. Left
front post
DO NOT OVERTIGHTEN.
A. Back Panel
D. Left Side Panel
H3
H3
H4
H6
H6
H3
H4
H3
H. Crib Top Panel
DO NOT OVERTIGHTEN.
H25
H25
H25
H25
H25
H25
H25
H25
H25
H25
H25

page 9
STEP 10. Attach spring frame
Swing out four hangers at corner of the spring frame (K) carefully. Attach spring frame FLAT SIDE UP.
Choose the height of the spring frame. Start at the highest level and adjust accordingly.
Bolt the spring frame (K) to legs using Allen head bolts (H5), washers (H26), lock washers (H25) and Allen
wrench (H24). As the child grows, it is important to lower the spring.
Make sure the spring frame is level.
Do not overtighten.
Make sure the mattress support frame is installed FLAT SIDE UP. Make sure the mattress
support frame is level when installing.
*As your child grows, it is important to lower the mattress support.
K. Spring Frame
H26
K
H25
H5

page 10
STEP 11. Attach the crib top
panel and front panel
STEP 12. Place dresser shelves
into the dresser
B. Front Panel
H. Crib Top Panel
H3
H4
H3
H6
H3
H4
H3
H6
AA-1
AA-2
DO NOT OVERTIGHTEN.
H25
H25
H25
H25
H25
H25
Fix the dresser shelf (with pre-
drilled screw holes) (AA-2) using
two 7/8" wood screws (H27).
H27
AA-2
H27