Melissa & Doug 9385 User manual

We care about your comments. Please call us!
1-800-284-3948
www.MelissaAndDoug.com
2013 Melissa & Doug, LLC, P.O. Box 590, Westport, CT 06881
c
CHOKING HAZARD- Small parts.
Not for children under 3 years.
WARNING: !
WARNING:
Adult assembly required.
!
Item #
Assembly Instructions
9385
9385 WOODEN DOLL CRIB
All Rights Reserved

9385 WOODEN DOLL CRIB
Parts
(G) 1 Piece
(C) 2 Pieces
(B) 2 Pieces
(A) 2 Pieces
(D) 2 Pieces
(E) 2 Pieces
(F) 2 Pieces
Barrel Nut
Short Screw
Medium Screw
Long Screw
Hex Key
20 Pieces
4 Pieces
12 Pieces
8 Pieces
1 piece
1 Piece
1 Piece
1 Piece
HARDWARE
(Shown Actual Size)
Hex Head
Hex Head
Hex Head
Mattress
Pillow
Blanket

How to correctly install
Barrel Nuts
Press a Barrel Nut into the hole in the
part making sure that the "+" pattern
is facing out.
"+" pattern
Using a standard screwdriver, turn
the Barrel Nut until the threaded hole is facing
outward to accept the screw shown below.
Threaded hole
of the Barrel Nut
9385 WOODEN DOLL CRIB
(Images on this page are
for example only.)

A
B
C
Long Screw
Barrel Nut
Barrel Nut inserted and turned
so its hole matches the hole in
the wood panel. See the detailed
instructions on installing Barrel
Nuts at the beginning of this
Assembly manual.
9385 WOODEN DOLL CRIB
STEP 1
Assemble parts (B) and (C) to part (A) using 4 Long Screws
and 4 Barrel Nuts as shown below.
Repeat the same for the second side using the additional
parts (A), (B) and (C).
Completed assembly

Medium Screw
D
D
Holes for Barrel Nuts
should face inward
Assemble 2 parts (D) as shown using 4 Medium Screws
and 4 Barrel Nuts. Make sure to face the holes for
the Barrel Nuts on part (D) inward for a smooth look
on the outside of the Crib.
Barrel Nut
9385 WOODEN DOLL CRIB
STEP 2
Completed assembly
4 pieces for
this Step
4 pieces for
this Step

E
E
Short Screw
9385 WOODEN DOLL CRIB
STEP 3
Completed assembly
2 pieces for
this Step
Attach 2 parts (E) as shown using 2 Short Screws

Second side assembled
in Step 1
Short Screw
Barrel Nut
Short Screw
Medium Screw
9385 WOODEN DOLL CRIB
STEP 4
Completed assembly
6 pieces for
this Step
2 pieces for
this Step
Attach the second Side Assembly that you made
in Step 1 as shown below using 4 Barrel Nuts,
4 Medium Screws and 2 Short Screws.
4 pieces for
this Step

F
F
Assemble 2 parts (F) as shown below using 4 Medium Screws
and 4 Barrel Nuts.
Medium Screw
Barrel Nut
Note: This side of part (F) is
recessed for the head of the
Screw. Make sure to use this
side as shown.
9385 WOODEN DOLL CRIB
STEP 5
Completed assembly
4 pieces for
this Step
4 pieces for
this Step

G
Add the Mattress, Blanket and Pillow and you are ready to play!
9385 WOODEN DOLL CRIB
STEP 6
Completed assembly
Fit part (G) to the assembled Crib by tipping one end
in first, then lowering the opposite end.