Great Little Trading Large Classic Toy Box User manual

1
A f ew important pointers before you start:
•It might be worth checking on our website that there are no updates
or revisions to these instructions (if we have had helpful feedback from
other customers we pass it on via the product web page). Simply check
any site updates.
•Please read the instructions right through before you start, and check
separating all the hardware into piles makes it easier to be sure that
everything is present and correct.
•Make sure you have the right tools. Allen keys are provided if required,
you need at the beginning of the instructions.
•It’s a good idea to build the unit in the room where you are going to be
using it, to avoid the need to move it after it’s been assembled.
•Do not throw away any packing materials until assembly is complete,
just in case you accidentally discard smaller parts or hardware.
Thank you for shopping with GLTC, we hope you enjoy
having this product in your home.
We know assembling furniture,toys or accessories is not everyone’s
favourite way to spend their time,so we’ve tried to make assembling
this item as quick and painless as possible.
Hopefully our efforts will have been worthwhile and you’ll sail
through the whole process. But if it all feels a bit too much
like hard work, then we do have an assembly company we
can recommend: the Flatpack Construction Company offers a
nationwide service and can be contacted on 0843 289 4951 or
Good luck!
25/06/2019
V3
easy - medium - hard two-person job
Large Classic Toy Box

2
Customer Service:
Safety Warnings:
•
•
•
•
•
•
Adult assembly required.
Unassembled product contains small parts which may present a choking
hazard.
Children should be kept away from the product during assembly to
avoid any possible risk of injury.
DO NOT use power tools in the assembly of this product as there is a
risk of over-tightening and consequently splitting of the wood.
Assemble and use on a flat and level surface.
IMPORTANT! The lid support mechanism must be installed correctly to
ensure that entrapment risks are not present. Check to make sure the
lid support is correctly installed by moving the lid up and down. When
you let go of the lid it should stop, not fall or slam shut.
•Check all fixtures and fittings regularly and tighten as necessary.
•Please retain these instructions for future reference
•Maximum weight on lid: 70kgs
•
•
If you find that any components are missing or damaged, please do not
begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
We do stock spare hardware packs at our warehouse, so we should be
able to send you a replacement pack immediately if required.
Product Care:
•
•
•
Wipe clean using a soft damp cloth followed by a dry cloth.
DO NOT use cleaning products which contain ammonia, solvents or
abrasive material.
DO NOT expose the item to extremes of heat and humidity.
Could we do better?
If there is any thing you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know;
we’ll pass any helpful hints and tips on to other customers via our website
and update the instructions.
All you need to do is drop us a line at [email protected]
Thank you

#1
#1
#1
#2
#2
#1
#1
#1
#3
#3
#3
#3
#1 22x Wooden Dowels
35mm
#2
#3 #4
#5
25x Screws
25mm
15x Screws
12mm
#6 1x Safety Hinge
30mm
10x Screws 3x Hinges
You will need (not supplied)
Phillips Head Screwdriver
3
Component Check List
A
B
C
C
A1x Front Panel 1x Back Panel
B
C2x Side Panels 1x Base Panel
D
E1x Back Upstand 1x Left Upstand
F
G1x Right Upstand 1x Lid Panel
Step 1:
Attach front panel A, back panel B and 2x side panels
C together.
Hardware for Step 1:
8x #1 Wooden Dowels
12x #2 Screws (25mm)
Step 2:
Attach base panel D
When positioning the base
panel,ensure the rounded
corners are at the front
of the unit with the cut
out handle.
Note:
Hardware for Step 2:
8x #1 Wooden Dowels
10x #3 Screws (30mm)
D
H

4
H
#1
#1
#1
#1
#2
#2
#2
Step 4:
Attach the upstand to the lid panel H
Hardware for Step 4:
6x #1 Wooden Dowels
7x #2 Screws (25mm)
Step 3:
Create upstand
Hardware for Step 3:
2x #2 Screws (25mm)
Hardware for Step 5:
6x #5 Screws (12mm)
Step 5:
Attach the hinges to the lid panel H
Note:
Ensure the countersunk holes
on F&G are on the outside.
#5
#5
#4
#2
#2
E
F
G
4
3x #4 Hinges

#6 Safety Hinge
Step 6:
IMPORTANT: 2 people are needed to complete this step safely.
With the assistance of a second person to hold the lid panel H in place,secure
the hinges to the toy box.
9x #5 Screws (12mm)
#5
#5
Hardware for Step 6:
Hardware for Step 7:
1x
4x #2 Screws (25mm)
Step7:
IMPORTANT: 2 people are needed to complete this step safely.
Attach safety hinge.
We suggest you attach the lower part of the safety hinge first then
tilt the lid until the screws at the top of the hinge can be secured.
It is important to fully insert the screws that attach the safety hinge
to ensure the hinge works correctly.
Do not leave the screws protruding.
#2
#2
#2
#2
#6
5
Copyright© 2008 G.L.T.C. Ltd.All rights reserved.
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.