
DETAIL A
DETAIL D
SCALE 1 / 5
DETAIL B
A
D
B
Parts List
Item Description
Qty
<59"
Width
Qty
>=59"
Width
1Panel 1 1
2 Table Bracket 2 3
3Panel Bracket 2 3
4Front Plate 2 3
5Magnet, 2mm Thick 23
6M5 x 10mm
Machine Screw 46
7M5 x 22mm
Machine Screw 4 6
8Wood Screw 6 9
Step 1 - Separate magnet brackets and dis-assemble
Panel Bracket (Item 3), Front Plate (Item 4), and Magnet
(Item 5), by removing screws (Item 6).
Do NOT dis-assemble Table Bracket (Item 2).
Step 2 - Using appropriate machine screws (Item 6 or Item 7),
assemble Magnet (Item 5), Panel Bracket (Item 3), and
Front Plate (Item 4) to Panel (Item 1) as shown.
1
23
4
5
78
NOTE: It is critical that the distance between magnets on panel
matches the distance between magnets on table brackets.
Step 3 - After measuring distance between
magnets on panel assembly, locate positions
of Table Brackets (Item 2). With front
surface of Table Bracket flush with
table edge, secure center Wood
Screw (Item 8) first, then
outer screws to front of
slots on bracket.
Step 4 - To adjust for more
gap between table and panel,
remove center screw, loosen outer
screws, adjust gap, and re-tighten
outer screws.
6
PE9
PE18
WARNING: Screw 8 is for work surface 1" or thicker only.