Merlin Sonic M User manual

1
Thank you for purchasing this Merlin Product. Please read the
instruction manual carefully before using the product.
The documentation provided will allow you to fully enjoy all the
features this unit has to offer.
Please save this manual for future reference.
Instructions
Merlin’s Sonic M premium Bluetooth enabled earphones let you
experience crystal-clear sound without being attached to a cable.
Power On/Off:
To turn earphones on, press down on Multi-Function button (MFB) and
hold till a blue light blinks. To turn earphones off, press down on MFB
button till a red light appears.
Note: After earphones are powered on, if a device is not connect for 5
minutes, the earphones will power off automatically.
Pairing:
Turn the earphones on and hold the MFB for about 7 seconds till the
light blinks blue and red alternatively - Open the Bluetooth function on
the phone - Search Bluetooth Devices and connect to “Sonic”
Volume Increase or decrease:
Press the Volume Up or Volume down button accordingly.
Play or Pause Songs:
During playback, press the MFB once to play or pause songs.
Previous/Next song:
Long press the Volume Up button to go to the next song. Long press
the Volume Down button to go to the previous song. Answering a call:
Press the MFB button once to answer an incoming call or to end an
ongoing call.
Answering a call:
Press the MFB button once to answer an incoming call or to end an
ongoing call.
Charging Sonic:
To charge the earphones, use the included charger to connect the
device to a USB port or suitable DC adapter.
FAQ
Q)The earphones won’t switch on.
A) As with all new rechargeable items, please ensure that the battery is
completely charged before use.
Q) The earphones won’t connect via Bluetooth.
A) Check if you have enabled Bluetooth in your device and that the
earphones are in pairing mode. Ensure that your device isn’t connected
to another Bluetooth device.
Q) I can’t hear any noise on the earphones.
A) Check your earphones and phone/device’s volume. Ensure that your
phone is not in silent mode.
Maintenance
1. Retain these instructions for future use.
2. Clean the product with a damp cloth and mild soap.
3. Do not expose this product to rain or moisture.
4. Be careful not to turn or twist the cables used in this product too
much as it can lead to malfunction and failure.
5. This product is not designed to be submerged in water and will
malfunction if this occurs.
6. This product has no user serviceable items inside. Do not open this
product as the user risk injury and would void the warranty.
7. Keep unit away from strong magnetic fields to avoid interference
with the product.

2