EDIFIER EDF700026 User manual

When the headset is powered o, press and hold the " " button for 10 seconds
until the red light ashes rapidly and o, then the facto settings have been
restored.
When the headset is powered o, press and hold the " " button for 5 seconds.
Select "HECATE G4 S" in your device setting to connect.
封面
1 2
Product description and accessories
EN Connection mode
Microphone
Headset status indicator
Charging cable
ULTRA LOW LATENCY DUAL MODE WIRELESS GAMING HEADSET
Manual
Bluetooth
Inse the adapter, the headset switch to bluetooth ash speed 2.4G wireless
mode and automatically connect successfully.
Inse the adapter into a Type-C device
Inse the adapter into a USB device
Note:
•Images are for illustrative purposes only and may dier from the actual product.
•For the need of technical improvement and system upgrade, information and
specications contained herein may be slightly dierent from actual product. If
any dierence is found, the actual product prevails.
•The headset and adapter are facto-bound as a pair, please keep them carefully.
If lost, you need to return the headset or adapter to us for upgrade binding.
1
2
Power on/o button
Microphone indicator
Microphone mute/unmute
Volume control
Type-C charging po
Bluetooth/Bluetooth
Flash Speed 2.4G
Microphone
5
1
2
3
4
5
6
7
8
Controls
3
Microphone mute/
unmute
Pairing
Answer a call
End a call
Reject a call
Play/pause
Music/game mode
Light on/o
Power on/o
it is enabled by default when the headset is turned on,
and eective in the conversations
Bluetooth Flash Speed 2.4G
Bluetooth
封底
Multi-function adapter
USB po
Type-C po
RGB light
Bounce up
Bluetooth
Bluetooth
Setting
HECATE G4 S
My Device
Bluetooth
Bluetooth
Setting
HECATE G4 S
My Device
Bluetooth FLash Speed 2.4G Wireless
Reset (use with caution)
5s
Press Down
Press Down
3s/5s
3s
3s
x2
x1
x2
x1
x1
x1
L
R
For more information, please visit our website:
www.edifier.com
Model: EDF700026
FCC ID: Z9G-EDF174
IC: 10004A-EDF174
Adapter Model: EDF700027
FCC ID: Z9G-EDF175
IC: 10004A-EDF175
Edifier International Limited
P.O. Box 6264
General Post Oce
Hong Kong
www.edifier.com
© 2022 Edifier International Limited. All rights reseed.
Printed in China
www.hecategaming.com
Designed by DONGGUAN EDIFIER ESPORTS TECHNOLOGY CO.,LTD.
NOTICE:
For the need of technical improvement and system upgrade, information
contained herein may be subject to change from time to time without
prior notice.
Products of EDIFIER will be customized for dierent applications.
Pictures and illustrations shown on this manual may be slightly dierent
from actual product. If any dierence is found, the actual product prevails.
Hereby, Edier International Limited declares that the radio equipment
type EDF700026/EDF700027 is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address: https://www.edier.com/int/eu-doc.html
User manual
4
For Multi-function adapter
The minimum operating distance from the human body is 0mm, and the maximum SAR
value is 0.285W/kg
For Ultra-low Latency Dual Mode Wireless Gaming Headset
The minimum operating distance from the human body is 0mm, and the maximum SAR
value is 0.057W/kg
Pour adaptateur multifonction
La distance de fonctionnement minimale du corps humain est de 0 mm et la valeur SAR
maximale est de 0,285 W/kg.
Pour casque de jeu sans fil à double mode de latence ultra-faible
La distance de fonctionnement minimale du corps humain est de 0 mm et la valeur SAR
maximale est de 0,057 W/kg.
[文件：G4S 英文说明书.pdf][文件：G4S 英文说明书.pdf]

版面设计：
V1.2/IB-200-000000-14版本号及料号：
名 称：
说明书FCC ISED认证说明-便携式音箱及耳机
材 质：
125×120（MM）尺 寸： 校 对：
批 准：
东莞市漫步者科技有限公司
80g书纸
V1.1 改IC警告语/V1.2 IC改为ISED和更改部分文字说明
FCC Regulatory Compliance
Warning: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Compliance
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
ISED Regulatory compliance
This device contains licence-exempt transmitters that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.
L’émetteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada
applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
L’appareil ne doit pas produire de brouillage;
L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.
Cet équipement est conforme aux limites d'exposition aux radiations IC CNR-102 établies pour un environnement non contrôlé.
IB-200-000000-14