METHVEN Futura User manual

Futura Sink Mixer
with adjustable cartridge for temperature and flow control
283092
Issue:
B
Page
1
of 2

METHVEN LTD
For you warranty please refer to www.methven.com or call Customer Service
New ealand
0800 804 222
Australia
1 300 638 483
UK
0800 195 1602
283092 Issue: B Page 2 of 2
Ceramic Cartridge Adjustment
Do not remove the ceramic cartridge from the mixer while carrying out the following adjustments.
Flow Adjustment
Using a 2.5mm hex key, loosen the gru screw
through the hole in the ack of the handle.
Pull the handle off the mixer.
Carefully pry the small lue wedge from the ack of
the cartridge stem.
Reinsert it in to a lower groove on the stem ensuring
it is fully clicked in. The handle cannot e assem led
unless it is inserted correctly.
Reverse instructions to re-assem le.
Temperature Adjustment
Using a 2.5mm hex key, loosen the gru screw
through the hole in the ack of the handle.
Pull the handle off the mixer.
With a small screw driver carefully pry the red
Temperature Limiting Ring from its locator.
Turn the Temperature limiting ring clockwise (+) to
increase maximum hot temperature, anti-clockwise (-)
to reduce the maximum hot temperature.
Replace the adjustment ring in the locator and push
firmly to secure. The raised portion of the ring with
the +/- markings should e to the front of the faucet.
Reverse instructions to re-assem le.