Metos WKI User manual

WATER BOILERS
WKI
WKT
WKT-D
TYPE: 3, 10, 10HA, 10VA, 18, 20/3, 20/6, 25HA, 25VA, 40, 60, 80
Accessories
Tap and swiwel arm left
Tap and swiwel arm right
Tap and swiwel two arms
Installation and Operation Manual
S/N: Rev.: 2.0

19.11.2002 Rev. 2.0
Dear Customer,
Congratulations on deciding to choose a Metos appliance for your kitchen activities. You
made an excellent choice. We will do our best to make you a satisfied Metos customer
like thousands of customers we have around the world.
Please read this manual carefully. You will learn correct, safe and efficient working meth-
ods in order to get the best possible benefit from the appliance. The instructions and hints
in this manual will give you a quick and easy start, and you will soon note how nice it is
to use the Metos equipment.
All rights are reserved for technical changes.
You will find the main technical data on the rating plate fixed to the equipment. When you
need service or technical help, please let us know the serial number shown on the rating
plate. This will make it easier to provide you with correct service.
For your convenience, space is provided below for you to record your local Metos service
contact information.
METOS TEAM
Metos service phone number:...............................................................................................
Contact person:....................................................................................................................

19.11.2002 Rev. 2.0

19.11.2002 Rev.
1. General .......................................................................................................... 1
1.1 Symbols used in the manual .......................................................................................... 1
1.2 Symbols used on the appliance ...................................................................................... 1
1.3 Checking the relationship of the appliance and the manual .......................................... 1
2. Safety .............................................................................................................. 3
2.1 Safe use of the appliance ............................................................................................... 3
3. Functional description .................................................................................. 4
3.1 General .......................................................................................................................... 4
3.2 Construction .................................................................................................................. 5
3.3 Operating principle ........................................................................................................ 6
3.3.1 Operating switches and indicator lights ................................................................. 6
4. Operation instructions ................................................................................. 7
4.1 Before using the appliance ............................................................................................ 7
4.1.1 Preparing the operation .......................................................................................... 7
4.2 Operation procedures ..................................................................................................... 8
4.2.1 Temperature protection .......................................................................................... 8
4.3 After use ........................................................................................................................ 8
4.3.1 Cleaning ................................................................................................................ 8
4.3.2 Descaling ............................................................................................................... 9
5. Installation ................................................................................................... 11
5.1 Installation ................................................................................................................... 11
5.2 Positioning the appliance ............................................................................................. 11
5.3 Electrical connections .................................................................................................. 11
5.4 Water connections ....................................................................................................... 12
5.5 Transport ...................................................................................................................... 12
6. Spare parts .................................................................................................. 13
6.1 Voltage codes .............................................................................................................. 15
6.2 Product codes ............................................................................................................... 15
7. Technical specifications .............................................................................. 71

19.11.2002 Rev.

19.11.2002 Rev. 2.0
General
1
1. General
Carefully read the instructions in this manual as they contain important information re-
garding proper, efficient and safe installation, use and maintenance of the appliance.
Keep this manual in a safe place for eventual use by other operators of the appliance.
The installation of this appliance must be carried out in accordance with the manufactur-
er’s instructions and following local regulations. The connection of the appliance to the
electric and water supply must be carried out by qualified persons only.
Persons using this appliance should be specifically trained in its operation.
Switch off the appliance in the case of failure or malfunction. The periodical function
checks requested in the manual must be carried out according to the instructions. Have the
appliance serviced by a technically qualified person authorized by the manufacturer and
using original spare parts.
Not complying with the above may put the safety of the appliance in danger.
1.1 Symbols used in the manual
This symbol informs about a situation where a safety risk might be at hand. Given instruc-
tions are mandatory in order to prevent injury.
This symbol informs about the right way to perform in order to prevent bad results, appli-
ance damage or hazardous situations.
This symbol informs about recommendations and hints that help to get the best perform-
ance out of the appliance.
This symbol informs about a function that has to be taken into account in self-control.
1.2 Symbols used on the appliance
This symbol on a part informs about electrical terminals behind the part. The removal of
the part must be carried out by qualified persons only.
1.3 Checking the relationship of the appliance and the manual
The rating plate of the appliance indicates the serial number of the appliance. If the man-
uals are missing, it is possible to order new ones from the manufacturer or the local rep-

19.11.2002 Rev. 2.0
General
2
resentative. When ordering new manuals it is essential to quote the serial number shown
on the rating plate.

19.11.2002 Rev. 2.0
Safety
3
2. Safety
2.1 Safe use of the appliance
• Always remove the plug from the socket if the machine has to be opened for repair
or maintenance
• Do not position the machine in areas where the temperature drops below the freez-
ing point as there will always remain water in the system.
• Always plug the machine into an earthed wall socket.
• Do not submerge or spray the machine.
• Have all repairs carried out by a specially trained technician.
• During use, some parts will become very hot.
• In case the machine is not used for a relatively long period of time, it is advisable
to remove the plug from the socket and to close the water drain (WKT-VA and
WKI).

19.11.2002 Rev. 2.0
Functional description
4
3. Functional description
3.1 General
The storage water heaters WKI, WKT and WKT-D can be installed wherever large wol-
ume of hot water is needed for example for instant coffee, tea, cocoa, soup etc. The water
heaters can fill both cups and small jugs. These storage water heaters are fitted for this
purpose with a non-drip tap which is easy to operate. The water heaters can be supplied
with either manual fill (WKT and WKT-D) or a fixed water connection for extra convin-
ience.
The WKT-D is double-walled and has a polyurethane insulation (CfC free).

19.11.2002 Rev. 2.0
Functional description
5
3.2 Construction
In the figures below the main parts are indicated
WKT
A. Cover
B. Handle
C. Lever gauge with litre index scale
D. Hot water no-drip tap
E. Indicator light
F. Adjustable thermostat
G. Dry-boil safety guard
H. Water connection with float mechanism (only WKT-VA)
I. Electrical supply

19.11.2002 Rev. 2.0
Functional description
6
WKT-D
A. Cover
B. Handle
C. Lever gauge with litre index scale
D. Hot water no-drip tap
E. Indicator light
F. Adjustable thermostat
G. Dry-boil safety guard
H. Electrical supply
3.3 Operating principle
3.3.1 Operating switches and indicator lights
E. Heating element indicator light
F. Adjustable thermostat

19.11.2002 Rev. 2.0
Operation instructions
7
4. Operation instructions
4.1 Before using the appliance
4.1.1 Preparing the operation
The following procedure should be carried out before a new appliance is used.
Manual filling (WKT-HA, WKT-D)
• Remove the cover of the storage water heater
• Fill the storage water heater with water, till the mark on the litre index scale. Never
overfill the reservoir.
• Replace always the cover of the storage water heater.
• Put the plug fitting in the socket and switch the machine on by turning the thermo-
stat (F) to the required temperature.
• The indicator light (E) will now light up until the water has reached the correct
temperature.
• When the indicator light goes out, the storage water heater is ready for use. During
use the indicator light will regularly go on and off, to show that the water is heating
up.
• Check regularly (after draining of hot water) if the water heater needs refilling.
Draw off an amount of hot water, when the machine is used for the first time.
Water connection (WKT-VA)
• Connect the water supply hose to the swivel joint at the back of the machine and
to a manually operated water stop valve. Attention! use cold water only.
• Open the manually operated water stop valve and check that the swivel connec-
tions are not leaking
• Open the swivel joint (H) on the upper side of the machine, the storage water heater
will fill up. The float mechanism stops the filling if the storage water heater is full.
• Put the plug in the socket and switch the machine on by turning the thermostat (F)
to the required temperature.
• The indicator light (E) will now light up until the water has reached the correct
temperature.
• When the indicator light goes out, the storage water heater is ready for use. During
use the indicator light will regularly go on and off, to show that the water is heating
up.
Draw off an amount of hot water, when the machine is used for the first time.

19.11.2002 Rev. 2.0
Operation instructions
8
Water connection (WKI)
• Open the water mains tap and switch on the electrical mains switch.
• Push up the orange switch on the left side. When water is visible in the level gauge
on the side of the heater, switch on the heating with the green switch. The storage
water heater will fill up. The float mechanism stops the filling if the storage water
heater is full.
• Adjust the water temperature to + 97°C with the thermostat.
• When the water temperature has reached ca. + 97°C, the storage water heater is
ready for use.
• Close the automatic water filling by pushing down the orange water filling switch.
• First open the hot water tank fully and then close it a little bit. In this way air is
removed from the pipes and water more easily flows into the heater.
• Turn on the automatic water filling again after the dosaging.
4.2 Operation procedures
4.2.1 Temperature protection
There is a temperature protection in the machine that can be accessed from the outside.
This protection (G) is located at the back of the machine. This protection is activated when
the temperature goes too high. The most common cause for activating the security is scale
that has not been removed in time.
If the temperature protection operates proceed as follows:
• Let the unit cool down.
• Unscrew the black protection cover.
• Push the button, that now appeares and replace the black cover and fasten it tightly.
When the protection triggered due to scale formation, proceed according to the chapter
“Descaling”. When the cause was not scale formation, please call service.
4.3 After use
After use, close the water tap and turn off the electrical mains switch. The storage water
heater can be left on over night with a water temperature of ca. 70°C.
4.3.1 Cleaning
Clean the machine with a clean damp cloth. Avoid using abrasive. It can cause scratches
and dim spots. Remove scale deposits by using a scale remover.

19.11.2002 Rev. 2.0
Operation instructions
9
4.3.2 Descaling
During operation scale will form in the machine. Therefor the machine needs to be das-
caled approx. once per month to guarantee the lowest energy consumption and proper
functioning.
Dependent on the frequency of usage and the hardness of the water, we advise a regular
visual inspection of the unit.
Remove the cover of the storage water heater regular; If there is loose scale grid on the
bottom, or if there is severe scale formation on the walls, then the unit needs descaling.
In some cases it is sufficient to remove loose scale grid.
WKT, WKT-D
• Switch off the machine and remove the plug from the wallsocket.
• Close the water output tap, detach the water hose (WKT-VA and WKI) and re-
move the cover from the storage water heater.
• Turn the machine upside down above the sink. Loose scale grid will then come out.
• When there is no more scale in the machine, it can be operated as usual. To remove
remaining scale formation use descaling solvent.
• Carefully read the caution notice and the directions on the descaling solvent.
• Dissolve descaling solvent into 2 litres of warm water according to the instruc-
tions.
• Fill the hot water reservoir with the solution. This will now undergo a reaction
with the scale deposits.
• Allow the solution to soak in for about 10 minutes until the frothing has stopped.
• Tap some of the acid off and pour it back into the reservoir.
• Turn the machine upside down above the sink. Rinse the reservoir and the hot wa-
ter tap clean with hot water.
• When there is no more scale in the machine, it can be operated as usual. Consult
chapter “Connection to the water supply system (WKT-VA and WKI)” and “Prep-
aration before use”.
WKI
• Close the water filling with the orange switch, turn off the heating switch and emp-
ty all the water from the storage water heater by opening the water tap fully.
• Take off the lid and carefully remove all loose scale.
• Open the water filling switch and fill the heater until all scale is covered. Turn on
the current and heat the water to 60°C.
• Add the descaling solvent from abowe, approximately 3 teaspoons per litre water.
The solvent will undergo a frothing reaction. Warning: avoid breathing in the
steam from the solvent. Use a mouth cover and rubber gloves.
• Allow the solution to soak in until the frothing has stopped, empty the heater and
repeat the process.
• Rinse the heater by filling and emptying it three times.
• Put the lid back on.
Stay near the machine while maintenance is being carried out.

19.11.2002 Rev. 2.0
Operation instructions
10
When descaling, always follow the instructions of the descaling agent used.
It is advisable to wear protection glasses and gloves during descaling.
Allow the machine to run through at least three times to rinse the solution from the system
after it has been descaled.
Wash your hands thoroughly after descaling.
The applience should not be submerged or hosed off.
Make sure all the repairs to the applience are carried out by a qualified technician.

19.11.2002 Rev. 2.0
Installation
11
5. Installation
5.1 Installation
WKI:
• Install the storage water heater firmly on the wall and connect water-, drain- and
electrical connections.
5.2 Positioning the appliance
Place the WKT/WKT-D unit:
• At counter level and on a solid flat surface.
• Where it can be connected to the water outlet and the electricity grid.
• Such that it is not causing any damage in case of leakage.
5.3 Electrical connections
Depending on the model, the appliance should be connected according to the instructions
in the figures below.
• For 240V 1 phase with plug socket.
• For 240V 1 phase (3-core cable)
The followinng remarks apply to the figure:
• If the plug fitted on the machine cable does not fit to your socket, replace it with a
new plug that does fit.
• The replaced plug should be disposed of as it can be dangerous if plugged in a
socket.
The following points should be observed when wiring a new plug:
• The green/yellow-coloured wire (“EARTH”) should be connected to the terminal
which is either marked with the letter “E”, the “earth” symbol or coloured green
or green/yellow.
• The blue-coloured wire (“NEUTRAL”) should be connected to the terminal which
is either marked with the letter “N” or coloured black.
• The brown-coloured wire (“PHASE”) should be connected to the terminal which
is either marked with the letter “L” or coloured red.

19.11.2002 Rev. 2.0
Installation
12
IMPORTANT! The 3 core main cable has the following wiring code:
• Green/yellow - Earth
• Blue - Neutral
• Brown - Phase
5.4 Water connections
WKT-VA:
• The WKT-VA requires a water stop valve to be near the machine
• Connect the water hose provided to the cold water supply and the water connection
on the back of the unit. The hose has a lenght of 1.5 m.
5.5 Transport
Proceed as followed to transport the unit:
• Switch the machine off and remove the plug from the wallsocket.
• Close the water outlet tap and disconnect the supply hose (WKT-VA and WKT).
• Remove the cover of the reservoir. Turn the machine upside down to let the re-
maining water out above the sink.
• Replace the cover.
• The machine is now ready for transportation.
• Proceed with section “Installation” to reinstall the machine
Kelta/Vihreä, Grön/Gul
Sininen, Blå
Brun

19.11.2002 Rev. 2.0
Spare parts
13
6. Spare parts
WKI 10 .................................................. 17
WKI 10 .................................................. 19
WKI 10 .................................................. 21
WKI 10 VA ........................................... 23
WKI 10 VA ........................................... 25
WKI 10 VA ........................................... 27
WKI 20 Va 3kW ................................... 29
WKI 20 Va 3kW ................................... 31
WKI 20 Va 3kW ................................... 33
WKI 20 L VA 6 kW.............................. 35
WKI 20 L VA 6 kW.............................. 37
WKI 20 L VA 6 kW.............................. 39
WKI 40 L VA........................................ 41
WKI 40 L VA........................................ 43
WKI 40 L VA........................................ 45
WKI 60 L VA........................................ 47

19.11.2002 Rev. 2.0
Spare parts
14
WKI 60 L VA........................................ 49
WKI 60 L VA........................................ 51
WKI 80 L VA........................................ 53
WKI 80 L VA........................................ 55
WKI 80 L VA........................................ 57
WKT 3 L HA ........................................ 59
WKT 3 L HA ........................................ 61
WKT 10 L HA ...................................... 63
WKTD 10 L HA.................................... 65
WKTD 18 L HA.................................... 67
WKT25 .................................................. 69