METROVAC AIR FORCE COMMANDER User manual

AIR FORCE COMMANDER
VARIABLE SPEED
INSTRUCTION MANUAL
MODELS
AFTD-1V ~ AFTD-2V ~ AFTD-3V
DELIBERATELY MADE BETTER IN THE U.S.A®

Before using, check your plug to make sure it is the proper voltage
for your country.
UK plug 220-240
volt
EURO plug 220-240 volt
AUSTRALIAN PLUG 220-240
USA plug 110-120 can also be used in JAPAN

AIR FORCE COMMANDER
VARIABLE SPEED
A. Twin Fan Motor
1.17 HP (MVC-157B)
1.7 HP (MVC-157L)
4. HP (MVC-157E)
B. Handle (MVC-48)
C. 6 FT. Flexible Hose (MVC-202A)
D. On/Off Switch (MVC-74)
E. Blower Nozzle (MVC-196AA)
F. Groomers Rake (MVC-186)
G. Black Air Flare (MVC-195AB)
H. Variable Speed Control Knob (MVC-45A)
DELIBERATELY MADE BETTER IN THE U.S.A®

***READ ALL INSTRUCTIONS BEFORE USE***
AIR FORCE COMMANDER VARIABLE SPEED
Models
AFTD-1V ~ AFTD-2V ~ AFTD-3V
GROUNDING INSTRUCTIONS
This appliance must be grounded. If the machine should malfunction or breakdown,
grounding provides a path of least resistance for electric current and reduces the risk of
electric shock. This appliance is equipped with a cord having an equipment grounding
conductor and grounding plug. The plug must be plugged into an appropriate outlet
that is properly installed and grounded in accordance with all local codes and
ordinances.
EXTENSIONS CORDS
Use only three-wire outdoor extension cords that have three-prong grounding
receptacles that accept the appliance’s plug. Replace or repair damaged cords.
Avoid Dangerous Environment –Do Not Use appliance in damp or wet locations.
Do Not Use in Rain. Use of rubber gloves and footwear is recommended when working
outdoors.
Keep Away from Children. All persons not operating the machine should be kept at a
safe distance from the work area.
To Avoid Risk of Injury, use only attachments supplied by MetroVac specifically for this
appliance.
Never Carry Appliance by Cord. Do not yank cord from the receptacle. Keep cord away
from heat, oil, and sharp edges.
Store Idle Appliances Indoors. When not in use, appliances should be stored indoors in
dry, high, or a locked up place out of reach of children.

1. Insert the grounded Power Supply Cord into a grounded outlet.
IMPORTANT: PRODUCT MUST BE GROUNDED.
WARNING: INPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONDUCTOR CAN
RESULT IN A RISK OF ELECTRIC SHOCK!
2. When the use of the Hose (C) is desired, connect to the Hose Connection as shown.
3. Start the blower by pushing the On/Off Switch (B) to the left or right depending on
speed desired.
4. Attach or remove the attachments to or from the hose to control the air velocity.
5. Use the Variable Speed Control Knob (H) to control the air flow from 0 –100%.
DELIBERATELY MADE BETTER IN THE U.S.A®
Check out the collection of pet supplies we offer.