Miles SEX PANTHER User manual

1

2
WARNING
DO NOT RIDE YOUR BOARD UNTIL YOU HAVE READ
ALL OF THE FOLLOWING INFORMATION
PLEASE READ BEFORE RIDING:
ALWAYS wear a helmet and other safety equipment when
riding the board. These can reduce your chance of serious
injury or death in an accident.
Other forms of protective gear, such as knee pads, elbow
pads, and wrist guards are highly recommended.
ALWAYS obey and check the local road rules in your area
for where you can ride, and do not ride on busy roads with
line markings.
ALWAYS respect pedestrians.
DO NOT ride the board if you are under the influence of
drugs or alcohol.
DO NOT ride the board in wet/rainy conditions. While the
motors are water resistant, the board may slide from under
your feet causing injury.
DO NOT ride the board in poor visibility conditions.
TAMPERING with the board’s electronics will void your
warranty.

3
contents
MILESBOARD.COM/MANUAL
For the latest version of this User Manual visit:
4 SAFETY
6 POWER AND CHARGING
8 BOARD OVERVIEW
10 REMOTE
14 FIRST RIDE
16 WHEEL CHANGE FOR PRO
18 QUICK TIPS
19 ADJUSTING YOUR RIDE
20 BATTERY SAFETY
22 WARRANTY

4
WARNING:
AT ANY MOMENT, YOUR BOARD CAN LOSE POWER DUE TO
REASONS SUCH AS RADIO INTERFERENCE, DRAINED BATTER-
IES, ACCIDENTAL RELEASE OF THE THROTTLE, AND OTHER
FACTORS.
Be careful with the throttle. To make the board responsive
and fun, we’ve increased the throttle sensitivity. This higher
sensitivity means fast or sudden inputs (quick acceleration
or breaking) can easily cause you to fall off. Start off slow
when riding in faster speed modes.
HILLS AND HIGH SPEED CAN BE VERY DANGEROUS as high
speed crashes can cause serious injury or death. Even if you
are an experienced rider, take caution at all times.
HIGH SPEED ELECTRIC MOTOR VECHICLES CAN KILL OR MAIM
YOU.
The SEX PANTHER is not designed for use on public roads.
Check your local regulations before you ride to ensure
compliance with any laws or ordinances. Always maintain
awareness of your surroundings while riding. If moving vehi-
cles are
present, assume they cannot see you. Know your local laws
governing the use of your board.
ONLY RIDE THE SEX PANTHER AT SPEEDS AND ON HILLS
WHERE YOU’D BE COMFORTABLE WITHOUT POWER AND
BRAKES.
safety

5
Always wear a helmet.
Always wear a helmet. Other forms of protective
gear, such as knee pads, elbow pads, and wrist
guar ds are highly recommended.
While the Sex Panther is water resistant, exposure to water
and the elements will cause your Sex Panther to age faster.
Exposure to heavy rains, puddles or submersion in water can
damage the electronics.
Riding your board in poor visibility conditions is highly ill ad-
vised.
Keep loose fitting clothing, hair, and fingers away from all
moving parts.
Metal parts of the board will heat up during use and can
cause serious burns if touched.
You, the user, are expected to be able to operate a non-pow-
ered skateboard prior to riding the Sex Panther
The Sex Panther packs a lot of power. Follow these tips to
ensure a safe riding experience:
- Accelerate carefully.
- Ride with a wide stance on the board.
- Ride with a low center of gravity.
- Lean forward when accelerating.
- Lean backwards when braking.

6
Using the wall charger provided, plug in your SEX PANTHER.
The charging port (1) is located underneath the deck on the
back-right portion of the board. Remove the safety cap that
prevents water and dust from entering the port and plug in
the board.
Charging can take some time, so it is best to place your
board on charge after any ride, this will keep the battery fully
charged and ready whenever you are. The charging block has
a battery indication light, so you know when it is full.
Red - Board is charging
Green - Board Battery is full
TIP: Disconnect the wall charger from you board once it is fully
charged to help extend the batteries life.
1. Connect the supplied USB C Cable to your remote and fully
charge it with any device that supports USB charging.
2. The remote battery level will be displayed in the top left
corner of the screen.
3. When the battery icon is full and stops flashing, the battery
is fully charged.
BEFORE USING THE BOARD,
YOU MUST FULLY CHARGE THE BATTERY.
power/charging

7
charging
charged

8
iNTERCHANGEABLE
WHEELS
ABEC/KEGEL WHEELS
CARBON FIBER DECK
648 WATT HOUR BATTERY
40 MILE RANGE
DIRECT DRIVE
SPEEDS UP TO 30 MPH
3000 WATT MOTORS
BEARINGS
REMOTE
HOBBYWING ESC
POWER BUTTON
UNDER BOARD ON LEFT
CHARGING PORT
UNDER BOARD ON RIGHT

9
iNTERCHANGEABLE
WHEELS
ABEC/KEGEL/AT WHEELS
CARBON FIBER DECK
648 WATT HOUR BATTERY
35 MILE RANGE
BELT DRIVE
SPEEDS UP TO 30 MPH
3000 WATT MOTORS
PULLEYS/BELTS
AT Wheel Pulley
Standard Pulley
270 BELT
360 BELT
BEARINGS
REMOTE
HOBBYWING ESC
POWER BUTTON
UNDER BOARD ON LEFT
CHARGING PORT
UNDER BOARD ON RIGHT
PRO

10
1. Throttle
2. Speed Mode
3. Power Button
4. Forward/Reverse
5. Remote Battery
6. Sex Panther Battery
7. Current Speed
8. Speed Mode Display
9. Tripmeter
10. Odometer
11. Charging Port
4* Forward/Reverse – Double Tap 2* to cycle between Forward and Reverse. Direction
will be represented by arrow on right.
8* Speed Mode - 1) Beginner 2) Expert 3) Ludicrous
(Single Tap to cycle through Speed Modes)
9* Tripmeter - resets each time the remote is powered on and off
10* Odometer - shows the total number of MILES throughout the life of the board
1
2
3
11
8
9
10
7
5 6
4
remote

11
POWERING ON THE BOARD
1. Press the silver on/off button located on the underside of the board towards the
back left. The button will blink red when it has been turned on.
2. To turn the board off, just press and hold this button again until the light stops
blinking.
POWERING ON THE REMOTE
1. Press and hold the on/off button on the remote for 2-3 seconds. The remote
will vibrate once and the LCD screen will display the operation screen.
2. To turn the remote off, press and hold the power button again for 2-3 seconds.
The remote will vibrate once and then power off.
PAIRING/SYNCING
First Power on both the board and the remote. If they are not synced, follow these
steps:
1. Make sure both the board and remote have been powered off.
2. On the board, press and hold the power button (3*) for 6-7 seconds. The red light
on the power button will begin flashing rapidly to show it is ready to be paired.
3. Press and hold the power button (3*) on the remote for 6-7 seconds.
4. The remote will display a message that says: “Remote Pairing” and “Remote
Paired”
5. Once paired – The unit system will display KM/H and MPH
• Use the throttle (1*) to toggle your selection
• Press the power button (3*) to select
6. “Motor type” will display “HUB” and “BELT” (HUB = Direct) (BELT = PRO)
• Use the throttle (1*) to toggle MOTOR TYPE and press the power
button (3*) to select
7. “Wheel Diameter” will be displayed next
• For Standard Wheels; select 97. Next select Ratio: 2.6
• For Cloud Wheels; select 105. Next select Ratio: 2.6
• For AT Wheels, select 152/ Next select Ratio: 4.2

12
HOW TO ACCELERATE
SLOWLY push the thumb throttle forward and the board will be-
gin to move. Like a gas pedal in a car, the further the throttle is
pushed; the more power will be supplied to the motors and the
faster you will accelerate.
TIP: Positioning your feet in a wide stance can give you more
stability. When accelerating, bending the front knee to appropri-
ately shift your weight forward can help counter act the acceler-
ation forces to keep you balanced.
HOW TO BRAKE
GENTLY pull the thumb throttle backwards to begin slowing down.
The further backwards the throttle goes, the stronger the breaking
will be.
TIP: When braking, bending the rear knee to appropriately shift your
weight backwards can help counteract the deceleration forces to
keep you balanced.
REVERSE FUNCTION
This function can only be enabled when the board is at a COM-
PLETE STOP.
While the board is at a standstill, double tap the Speed Mode But-
ton on the remote to go in reverse. Once you have backed up and
come to a complete stop. Double tap the Speed Mode Button on
the remote to switch back to forward.
using the remote

13
CHANGING SPEEDS - Level 1, 2, & 3
With the board and remote both turned on, your current
speed mode setting will be displayed in a circle in the lower
left corner of the remote:
Speed 1: Beginner
Perfect for beginners or first-time riders. The board
accelerates slowly with minimal torque and has a slower top
speed.
Speed 2: Expert
Great for cruising on longer rides that have little incline. There is
more torque than speed setting 1 so you will accelerate quicker
and reach a higher top speed but may have difficulty going up
very steep hills.
Speed 3: Ludicrous
For the Professional. This speed setting offers the most torque
and will have you accelerating to top speed quickly. Best for
off-roading and hill climbing.
To adjust the speed, simply click/press the Speed button on the
remote. Each time you press it the LCD will display which setting
you are in.
CRUISE CONTROL
Push the throttle to your desired speed and maintain constant
pressure.
While maintaining your desired speed, Press the POWER
Button to engage Cruise Control.
( Speed Level will be highlighted in a WHITE BOX )
You can now release the throttle to coast at the speed chosen.
To Disengage Cruise Control, press any button or Push / Pull on
the Throttle
WARNING: Cruise Control, if used IMPROPERLY, can lead to
Serious Injury or Death. EXERCISE EXTREME CAUTION and
AWARENESS when using this feature. ONLY Ride within your
limits and comfortability with cruise control.

14
Find an open and flat area with clean pavement for your first
ride.
Only ride the SEX PANTHER at speeds and on inclines that you
would be comfortable riding on an unpowered skateboard.
If for any reason the board loses power or responsiveness,
you’ll have to rely on traditional skating techniques to safe-
ly come to a stop.
RIDING STYLE
The Best way to find out whether you ride Regular (left foot
forward) or Goofy (right foot forward), is just to ride and see
what is more comfortable for you. If you are just starting out,
we recommend a goofy stance, so you have a better view of
vehicular traffic (Right hand drive countries).
The SEX PANTHER uses powerful motors that can throw
you off balance if you are not standing properly, or ready
for the acceleration or braking. Follow these tips for a safer
ride.
1. Move the throttle in slow increments until you get used to
how the SEX PANTHER performs.
2. Stand wide on the board to help balance your weight as it
shifts when you accelerate and brake.
3. Stay in Speed Mode 1 (beginner mode) until you are com-
fortable riding the SEX PANTHER.
First Ride

15
Try both stances to see what feels best. If you’re
unsure of the stance you prefer, riding goofy allows you
to see traffic better.
REGULAR GOOFY

16
WHEEL CHANGE (97mm to AT)
FRONT TRUCK
1. Take your Skate Tool included in the box and remove the
Axle Nut and Speed Ring (spacer) that is securing the wheel
to the truck.
2. Slide the Wheel off the Truck, a Second Speed Ring will be
on the inner part between the Wheel and Truck. Be sure not to
lose this.
3. Pull off the Wheel keeping in mind that there will also be
another Speed Ring on the other side of the Wheel
If the Second Speed Ring comes off, place the Second Speed
Ring back onto the Axle.
4. Make sure you have bearings inserted into the wheel you
are placing on the board and that the middle spacer is posi-
tioned correctly so you can insert the Axle Through the wheel
and bearings.
5. Next place the AT tire on the Truck and then add the loose
Speed Ring. Screw the Nut on being sure not to over tight-
en the Nut. The outboard side of the tire has an arrow that
shows the drive direction. Make sure they are pointed to-
wards the front of the truck and the Schrader Valve is facing
outward away from the board.
6. Repeat steps 1 - 5 on the other side of the Front Truck.
wheel change
PRO

17
REAR TRUCK
7. Remove Axle Nut and Speed Ring securing the Wheel.
8. While holding the Wheel Pulley, with the other hand, slide
the Wheel off.
9. Once the belt is removed, use a Metric Allen Key Set to loos-
en the Motor Bolts.
10. Move the Motor outwards, all the way back.
11. Take the AT Pulley and Tire and insert the pulley into the
Tire being sure it is fully inserted.
12. Place the AT Belt over the Motor Pulley and Axle.
13. Place the AT Wheel w/ Wheel Pulley onto the Axle.
14. Once the AT Wheel is on, wrap the belt around the Motor
Pulley and Wheel Pulley.
Gently rotate the wheel to get the belt and the pulley to line up.
15. Pull the Motor back to increase the Belt Tension.
16. Hold this tension as you tighten down the Motor Bolts to
secure everything.
17. Once done, place the Speed Ring and Axle Nut back on and
tighten down.
18. Repeat steps 7 - 17 with the other side of the rear truck.

18
quick tips
pneumatic wheels
belts
• Check Motor Pulley Cover for any lodged rocks/dirt.
Any foreign objects can shred the belts.
• Clean dirt from wheels and pulleys as often as possible to
prevent blemishes and component failures.
• Close the charging port before any ride.
• Use Speed Cream to make bearings more efficient.
• Tighten up trucks for high speed riding.
• When inflating the Pneumatic Wheels, be sure to inflate up
to 50 P.S.I. (350KPa) (3.5 BAR)
To replace your Pneumatic Bladder in the AT Tires, please visit
milesboard.zendesk.help
• Use 285 Belt for 97mm/105mm Wheels
• Use 335 Belt for AT Tires
PRO SETTINGS

19
The SEX PANTHER is an Electric Skatebord. Over time,
with extended use, motors, ESC, and battery may even-
tually need to be replaced. For full instructions on how to
change and replace components, please visit milesboard.
com/sexpanthertips
The SEX PANTHER is equipped with the ability to inter-
change different wheels with a ABEC Hub Core.
• Smallest Wheel Size recommended: 97mm
• Largest Wheel Size recommended: 120 mm
(Adjust the Wheel Size parameters through the pairing
process)
The SEX PANTHER PRO is equipped with the ability to in-
terchange different wheels with a ABEC Hub Core as well
as the AT Wheels.
• Smallest Wheel Size recommended: 97mm
• Largest Wheel Size recommended: 152 mm
(Adjust the Wheel Size parameters through the pairing
process)
WARNING: With larger wheels, be mindful that it will
increase the chance of Wheel Interference. Be sure to
adjust your trucks, pulleys, and wheels accordingly so the
board will perform correctly.
adjusting your
ride

20
• Make sure the Charge Port is dry before you plug in the
power cord. Failure to follow these instructions could expose
you to electric shock, injury, burns, or cause fire.
• Do not submerge the batteries or platform in water. If you
suspect the Batteries or powerbase have been submerged or
experienced water intrusion, do not attempt to remove the
batteries. Do not plug the Power Cord into the board. Failure to
follow these instructions could expose you to electric shock,
injury, burns, or cause fire.
• Do not use battery if the battery casing is broken or if the
battery leaks any substance or emits smoke or unusual odors.
Avoid contact with any substance seeping from the batteries.
• As with all rechargeable batteries, do not charge near flamma-
ble material.
• Keep the battery away from all metal objects and store the
battery in temperatures between 32-104 degrees Fahrenheit.
• To store your lithium-ion battery for an extended time-
period
- for example, several weeks or months – first charge it fully,
and recharge it at least once every 3 months. Failure to do so
may shorten the life of your battery.
• If you use, charge, or store the batteries outside the limits
specified, you may void the limited warranty, damage your
batteries, and/or experience reduced range and ineffective
battery charging.
battery safety