Trigon Sports B427790 User manual

B427790
Premium Softball Pitcher’s C-Screen
ASSEMBLY INSTRUCTIONS
BOX CONTENTS
Description Quantity
• Screen leg tube 4 each
• Leg Bracket 2 each
• #3 piece 1 each
• #4 piece 1 each
• #5 piece 1 each
• #6 piece 1 each
• #7 piece 1 each
• #8 piece 1 each
• #9 piece 1 each
• #10 piece 1 each
• #11 piece 1 each
888-313-1303
www.trigonsports.com
Note: Nets and frame should be inspected prior to each use. DO NOT use protective screen
if holes are present in the netting. For use of this protective screen in batting cage setting
we recommend adding Item # B77PAD kit designed for this frame.
Please call 888-313-1303 to order or visit us on the web www.trigonsports.com.
HARWARE KIT CONTENTS
Description Quantity
• 21/2” Flat head bolts 4 each
• Lock washers & Nuts 4 each
• 2” Hex head bolt with Nut 2 each
11
10
5
9
8
4
6
3
7

STEP 4
Insert each leg per bracket (one
on each side) using push but-
tons attached.
888-313-1303
www.trigonsports.com
STEP 1 Unpack all items and lay on the ground
Begin assembling bottom frame
attaching Part #3 to Part #4 us-
ing (1) each 2” Hex head bolt and
nut. Tighten.
Attach leg frame brackets to
each side of bottom frame using
(2) each 2 ½” bolts and (2) each
lock washer and nut to each
frame bracket. Tighten.
STEP 2 STEP 3
STEP 5 Refer to diagram and finish assembly as show in drawing using push buttons attached.
(See note on Step 7)
STEP 8
Pull pillowcase style net over top
of frame.
To attach Part #10 and #11 use (1)
each 2” hex bolt and nut.
Tighten.
Do not assemble part #2 (“C”
curved piece) until AFTER net
is installed.
STEP 6 STEP 7
To install part # 2 (“C” curved
piece), lift piece underneath the
net and put into place. Insert
into Part #1 and Part #3 using
push buttons attached.
STEP 9 STEP 10 Adjust net squarely on the frame and lace bottom of the
net using lacing twine (already attached to bottom of net).
ASSEMBLED SCREEN