Million Dollar Baby Parker K5101 Installation and operating instructions

Parker Crib (K5101)- Assembly and Operation Manual
Congratulations on purchasing a Million Dollar Baby Product. This crib will provide many years of service if you adhere to the
following guidelines for assembly, maintenance, and operation. This crib is for residential use only.
Any institutional use is strictly prohibited.
Please be sure to follow the instructions for proper assembly. Use a Phillips head screwdriver for assembling the crib in addi-
tion to the Allen wrench included in the hardware box. Do not use power screwdrivers. All of our cribs are made from natural
woods.
Please understand that natural woods have color variations which are the result of nature and not defects in workmanship.
DO NOT SUBSTITUTE PARTS. ALL MODELS HAVE THE SAME QUANTITY OF PARTS AND HARDWARE. YOUR MODEL
MAY LOOK DIFFERENT FROM THE ONE ILLUSTRATED DUE TO STYLISTIC VARIATIONS.
G. Guard Rail
M. Allen wrench
A.Headboard
Tools Needed
(not included)
Phillips
screwdriver
B. Front Rail
D. Side (2)
C. Spring Frame
F. Side Rail (2)
K. 1 3/4” flat head
wood screw (8)
H. Left Leg (2)
Q. Barrel nut (16)
T. 2 1/4” Allen
head bolt (8)
S. 4” Allen
head bolt (8)
E. Foot (4)
J. Right Leg (2)
O. 3/4” Allen
head bolt (4)
P. 1 1/2” Allen
head bolt (4)
R. 1 1/4” Allen
head bolt (4)
L. 5/8” Wood
screw (12)
revised 11-2006
U. Lock washer (4)
HARDWARE
I. Post bracket (4)

STEP 4.
STEP 3.
Attach the left (H) and right (J) legs to the head-
board (A) using the Allen head bolts (S). Tighten
them into the barrel nuts (Q) with the Allen wrench
(M).
Insert barrel nuts (Q) into the top and bottom holes
on the left and right sides of the headboard (A).
STEP 2.
Attach the feet (E) to the bottom of the legs with
wood screws (K).
E
Q
STEP 5.
K
T
Insert barrel nuts into the top and bottom holes on
he left and right side of the front rail (B).
STEP 6.
Attach the left (H) and right (J) legs to the front rail
(B) using the Allen head bolts (S). Tighten them
into the barrel nuts (Q) with the Allen wrench (M).
Q
E
A
S
B
K
S
Q
T
D
STEP 7.
Insert barrel nuts (Q) into the holes in the face
of the side panels (D). Attach the Front rail (B)
and headboard (A) to the side panels (D) using
the Allen head bolts (T). Tighten securely with
the Allen Wrench (M).
Attach the post brackets (I) to the left legs (H) and
the right legs (J). Use three woodscrews (L) for
each bracket.
STEP 1.
I
L
H J

STEP 9.
Swing out the four hangers at the corners
of the spring frame (C). Be careful to
avoid scratching the crib finish. Attach the
spring frame (C) FLAT SIDE UP. Choose
the proper level for the mattress,
starting at the highest level and adjust
it down as the child grows. Secure the
spring frame (C) to the crib using the Al-
len head bolts (O) and tighten them with
the Allen wrench (M).
STEP 8.
Align the side rails (F) with the grooves
in the crib sides (D). Attach with the Allen
head bolts (P) through the pre-drilled
holes.
F
P
Before placing your mattress in the crib,
you can make your own mattress pro-
tector by cutting the cardboard packing
insert to 27” x 51”. Place it on the spring
frame under the mattress to extend the
life of the mattress.
KEEP THIS MANUAL IN A
SAFE PLACE FOR
FUTURE REFERENCE.
O
C
Make sure the Spring frame is
installed FLAT SIDE UP.
Please read the Caution and Warning
Statements insert before using your crib.
WE WILL ASK YOU FOR YOUR SERIAL NUMBER
FOR ALL WARRANTY AND REPLACEMENT PART RE-
QUESTS. PLEASE REFER TO THE LAST PAGE OF THIS
INSTRUCTION SHEET FOR WARRANTY INFORMATION.
KEEP THIS MANUAL INSIDE THE PLASTIC HOLDER
ATTACHED TO THE MATTRESS SUPPORT FOR FUTURE
REFERENCE.
Please refer to the label (sample below) on the inside face
of the headboard. Record the model/ item number and
serial number of your crib, the name of the store where
you made the purchase , the date of purchase and the wood
finish in the box to the lower right.
SAMPLE LABEL
XXXX
XXXXXXXX
Model Number:
Serial Number:
Store Where
Purchased:
Date of Purchase:
Wood Finish:
XX/XX

WARNING:
Failure to follow these warnings and
assembly instructions could result in
serious injury or death.
READ ALL INSTRUCTIONS BEFORE ASSEMBLING CRIB. KEEP
THE MANUAL FOR FUTURE USE.
WARNING:
l Strings can cause strangulation! Do not place items with a string around
a child’s neck, such as hood strings or pacifier cords. Do
not suspend strings over a crib or attach strings to toys.
l DO NOT place a crib near a window where cords from blinds or drapes
may strangle a child.
l Keep wall decoration, especially those with strings, completely
out of a child’s reach.
l Before each usage or assembly, inspect crib for damaged
hardware, loose joints, missing parts or sharp edges. DO NOT
use the crib if any parts are missing or broken. Ask your dealer or
contact Million Dollar Baby for replacement parts and instructional
literature if needed. DO NOT substitute parts.
l Check fasteners periodically for tightness. Do not overtighten.
This may cause distortion or breakage.
l When a child is able to climb out, reaches the height of 35 inches (90cm)
or when the height of the side rail is less than 3/4 of the child’s height, the
child should be placed in a youth or regular bed.
l After raising sides, make sure latches are secure.
l DO NOT leave child in crib with sides lowered. Be sure sides are in
raised and locked position whenever child is in crib.
l If refinishing, use only a non-toxic finish specified for children’s
products.
l When a child is able to pull to a standing position, set the
mattress to the lowest position and remove bumper pads, large
toys and other objects that could serve as steps for climbing out.
l Never use plastic shipping bags or other plastic films as mattress covers
because they can cause suffocation.
l DO NOT use a water mattress with this crib.
l Replace teething rail(s) if damaged or loose.
l Use a crib as a crib, not as a play pen. Remember that a crib is
not a substitute for a parent’s supervision.
l Parents should ensure a safe environment for their child by
checking the crib regularly before placing the child in the product. Please
make sure that every component is properly and securely in place.
l When re-assembling the crib for your second child, please keep
in mind that the screw holes will need to be filled in order for the screws to
grip the wood, Talk to your local hardware store or lumber yard about how
to do this properly.
Registering your product is even easier
than before. You can register your
product on our website at
www.milliondollarbaby.com
Care and Cleaning:
Do not scratch or chip the finish. Do
not use abrasive chemicals for cleaning.
Clean with mild soap on a soft rag. rinse
and dry thoroughly. If you ever refinish this
furniture, be sure to use only a non-toxic fin-
ish specified for children’s products. If you
choose to refinish this furniture, the warranty
will be voided.
IF YOU WOULD LIKE TO ORDER
REPLACEMENT OR MISSING PARTS
PLEASE VISIT US AT:
WWW.MILLIONDOLLARBABY.COM
OR YOU CAN CONTACT US BY MAIL
MILLION DOLLAR BABY
855 WASHINGTON BLVD.
MONTEBELLO, CA 90640
ONE YEAR LIMITED WARRANTY:
We will replace any missing parts at the time of
purchase or any defective item within a one year
period from the date of original purchase. Please
keep your receipt so that we may process your
warranty request. This warranty only covers new
units with original packaging and ownership, and
is not transferable. It does not cover any used,
secondhand or demo models.
This warranty does not cover any damaged or
defective parts that result from installation and
assembly, normal wear and tear, abuse, negligence,
improper use or alteration to the finish, design, and
hardware of the crib. The specific legal rights of
this warranty may vary from state to state. Some
states do not allow any exclusion or limitation of
incidental damages. Some stated do not allow limi-
tation on how long an implied warranty lasts.

Parker Crib (K5101)- Daybed conversion assembly
STEP 3.
STEP 2.
Unscrew the 6 Allen head bolts (T)
and remove the side rail (F) and
side panel (D).
All of the parts and hardware you will
need were supplied with the crib at the
time of purchase.
STEP 1.
Move the spring frame to the lowest
level.
STEP 4.
Attach the guard rail to each leg bracket using two
Allen head bolts (R) and two lock washers (U) at
each end.
The guard rail can be installed with the high end
facing either to the left or the right.
Check to make sure that all of the bolts are fas-
tened securely. Do not overtighten.
G
T
R
WARNING:
The minimum age shall not be less than 15 months and the maximum weight shall not be greater than 50 lbs.
Failure to follow these warnings and the assembly instructions could result in serious injury or death from entrapment
or strangulation. do not place the bed near windows where cords from blinds or drapes may strangle a child.
If guard rails are used as the mattress containment means, the guard rails provided must be used.
R. 1 1/4” Allen
head bolt (4) U. Lock washer (4)
U

Parker Crib (K5101)- Full size conversion assembly
You can order full size conversion bed
rails to match the finish of your crib. just
visit our website to order M4799 Wooden
bed rails.
www.milliondollarbaby.com
STEP 1.
Unscrew the Allen head bolts (T) and
remove the side rails (F) and side panels
(D).
STEP 2.
Insert barrel nuts (Q) into bed rails. Use 3”
Phillips head bolts (W) to attach the rails.
Tighten bolts securely with a Phillips
screwdriver.
Be sure to keep the extra bolts and barrel
nuts for future use.
STEP 3.
Q
(Q) Barrel nut (8)
(W) 3” Phillips head bolt (8)
W

Parker Crib (K5101)- Trundle drawer assembly
HARDWARE
N. Caster Wrench
K. 1” Phillips
head screw (2)
L. 7/8” Phillips
head screw (16)
M. Screwdriver
P. Caster
A. Drawer Back
B. Drawer Front
C. Drawer Side (2)
D. Center Support J. Drawer Bottom
RFLF LR RR
E. Left Front Corner
F. Right Front Corner
(large)
G. Left Rear Corner
H. Right Rear Corner
(small)
A
B
G
E
H
F
STEP 3.
STEP 2.
Slide the drawer sides (C) into the grooves in the
rear corner pieces and fasten them with Phillips
head screws (L).
Slide the left (G) and right (H) rear corners onto
the drawer back (A). Secure with Phillips head
screws (L).
Slide the left (E) and right (F) front corners onto
the drawer front (B). Secure with Phillips head
screws (L).
STEP 1.
Slide the drawer bottom (J) into the grooves in the
sides and back.
STEP 4.
Position the drawer front (B) over the sides and
bottom and fasten with Phillips head screws (L).
C
B
L
J
A

STEP 5.
Attach the center support (D) between the drawer
front and back using the Phillips head screws (K).
STEP 6.
Screw the casters (P) into the threaded inserts in
the bottom of each corner. Tighten them securely
with the caster wrench (N).