Million Dollar Baby Dresser Installation and operating instructions

revised 11DEC2013 Page 1
Dresser (8299) - Assembly and Operation Manual
Congratulations on purchasing an MDB Family product. This product will provide many years of service
if you adhere to the following guidelines for assembly, maintenance, and operation. This product is
for residential use only. Any institutional use is strictly prohibited.
Please be sure to follow the instructions for proper assembly. Use a Phillips head screwdriver for assembling
the product in addition to the Allen wrench included in the hardware box. Do not use power screwdriv-
ers. All of our products are made from natural woods. Please understand that natural woods have color vari-
ations which are the result of nature and not defects in workmanship.
DO NOT SUBSTITUTE PARTS. ALL MODELS HAVE THE SAME QUANTITY OF PARTS AND HARD-
WARE. YOUR MODEL MAY LOOK DIFFERENT FROM THE ONE ILLUSTRATED DUE TO STYLISTIC VARI-
ATIONS.

PARTS
Page 2
A. Left Side Panel B. Right Side Panel
C. Center Panel D. Right Bottom Panel
E. Door F. Shelf
G. Back Top Bar
H. Back Bottom Bar
J. Back Center Bar
K. Front Top Bar
L. Front Bottom Bar
M. Top Panel
N. Back Board (2)
P. Support Block (2) Q. Top Support Bar
R. Left Drawer
Panel (3)
S. Right Drawer
Panel (3)
T. Drawer
Bottom Board (3)

HARDWARE
STEP 1. Set up the center panel (C).
Page 3
H14. Right Panel Glide (3)
H15. Right Drawer Glide (3) H17. Left Panel Glide (3)
H16. Left Drawer Glide (3)
H11. 8X30mm
Wood Dowel (20)
H3. 1/2” Small Wood
Screw (56)
H1. 1-1/2” Wood
Screw (16)
H9. Knobs (7)
H10. Knob
Screws (7)
H2. 5/8” Small
Wood Screws (8)
H5. Cam
Lock (18)
H6. Cam Bolt (18)
H4. Metal
Pin (4)
H7. Door Hinges (2)
H12. 6X35mm
Wood Dowel (4)
H13. 8X25mm
Wood Dowel (4)
H14. Right Panel Glide
H3H3 H3
H14
H14
H14
H4 H4
H6
H11
C. Center Panel (left side) C. Center Panel (right side)
H6
U. Drawer Front Panel (3) V. Drawer Back Panel (3)
H18. 5/8” Wood Screw
with washer head (2)
Tools Needed
(not included)
Phillips
screwdriver

Page 4
STEP 2. Set up side panels (A and B).
STEP 3. Set up all bars (G, H, J, K and L).
H6
H6
H6
H6
H6
H6
H6
H6
A. Left Side Panel B. Right Side Panel
H17. Left Panel Glide
H3 H3H3
H17
H17
H17
H4 H4
H6 H6
H11
G. Back Top Bar
H. Back Bottom Bar
J. Back Center Bar
K. Front Top Bar
L. Front Bottom Bar
P
P. Support
Block
H11
H13 H13
H1 H1
H1 H1
P
H1 H1
H11
H11
H11
H11
H11
H11
H11 H11
H11
H11
H11
H11

Page 5
STEP 4. Attach center panel (C) to right bottom panel (D).
STEP 5. Attach front bars (K and L) and center panel assemble to right side panel (B).
Rotate H5
to secure.
D. Right
Bottom Panel
C. Center Panel
H5
H5
STE
C. Center Panel
D. Right
Bottom Panel
Rotate H5
to secure.
B. Right Side Panel
H5
H5
H5
H5 K. Front Top Bar
L. Front Bottom Bar

Page 6
STEP 7. Attach back bars (G, H and J) and top support bar (Q) to right side panel (B).
Then, slide in the top panel (M).
STEP 6. Insert wood dowels H12 to top support bar (Q).
Q. Top Support Bar
H12 H12
Insert
Rotate H5 to
secure.
Q
G. Back Top Bar
J. Back Center Bar
H. Back Bottom Bar
M. Top Panel
H5
H5
L
P
C. Center
Panel
P
C. Center
Panel
G
* Make sure the wood dowel (H11) on the support block (P)
inserts into the bottom hole of center panel (C).
H11
* Make sure the wood
dowel (H11) on the support
block (P) inserts into the
hole of center panel (C).
H11

Page 7
STEP
9. Attach back boards (N) using
small wood screws (H3) and
5/8” wood screws with
washer head (H18).
STEP 10. Attach the door (E) to the
dresser. And, place the
shelf (F) inside the dresser.
E. Door
H7. Door Hinges
H2
H2
H2
H2 H10
H7
H7 H9. Knob
STEP 8. Attach the left side panel (A).
Rotate H5 to
secure.
E. Door F. Shelf
N. Back Board
N. Back Board
H3
H18 H18
A. Left Side Panel
H5
H5
H5
H5

STEP 11.
Page 8
R. Left
Drawer
Panel
S. Right
Drawer
Panel
T. Drawer
Bottom Board
U. Drawer
Front Panel
H9. Knob
H10
H3
H3
H1
H1
V. Drawer
Back Panel
H6
H6
H5
H5
H15. Right Drawer Glide
H16. Left
Drawer Glide
Rotate H5 to
secure.

Page 9
STEP 12. Slide the drawers into the dresser.
Phillips
screwdriver
Tools Needed (not included)
Pencil
Stubby
Screwdriver
X 2
X 1 X 1
X 1
Serious or fatal crushing can occur when furniture tips over on children. To help prevent tip-over, follow the
steps below to install this anti-tipping strap.
FURNITURE ANTI-TIPPING KIT INSTALLATION
WARNING
Place heaviest item in the lowest drawers.
do not set TVs or other heavy objects on
top of this product.
Never allow children to climb or hang on
drawers, doors, or shelves.
Never open more than one drawer at a time.
(OR)
Do not defeat or remove the drawer interlock
system.
Use of tip-over restraints may only reduce,
but not eliminate, the risk of tip-over.
This is permanent label. Do not attempt to remove!
Unless specifically designed to accommodate,
Serious or fatal crushing injuries can occur
from furniture tip-over. To help prevent
tip-over:
STEP 13.

Locate a 2” x 4” stud behind the
wall, and make a mark.
13a.
13b.
Install the strap on the wall with
long screw and washer.
13c.
Install the other end of strap on
the back of dresser with short
screw and washer into the wood
framing of the dresser.
2” x 4” wall stud
Page 10