Minka Group 10039 User manual

Installation Instruction
For Table Lamp
ITEM # 10039
WARNING
* Risk of shock, do not plug in the unit before assembly.
* Do not exceed the maximum wattage rating.(Max.100W)
* Before turning on, please follow the instruction manual step by step.
INSTALLATION
1. Place lamp body on a flat surface.
2. Put shade (B) over the lamp holder（A）.Use plastic ring (C) to secure the shade (B) to
lamp holder (A).
3. Adjust the shade until it is leveled horizontally.
4. Install a light bulb into the lamp holder.
IMPORTANT SAFETY INSTRUCTIONS
This plug will fit a grounding outlet only one way. If the plug does not fit fully into
the grounding outlet, contact a qualified electrician. Never use with an extension
cord unless the plug can be fully inserted. Do not change or alter the plug.
IN AN ONGOING EFFORT TO BE ENVIRONMENTALLY FRIENDLY AND IN
COMPLIANCE WITH CALIFORNIA TITLE 20, AN ENERGY SAVING
COMPACT FLUORESCENT BULB(S) IS INCLUDED. PLEASE NOTE THAT
THE LIFE EXPECTANCY OF THE BULB(S) IS NOT GUARANTEED.