MIrai T3714C User manual

English
User's Manual LCD TV
Table of contents
Important Safety Instructions......................................................................... 02
Cautions..................................................................................................... 03
Descriptionsand accessories........................................................................ 05
LCD TV installation method & operation
The connectorsand sockets......................................................................... 06
Control panel keys....................................................................................... 10
Remote control............................................................................................ 11
Display Menu
Display modes............................................................................................ 13
Using the advanced menu............................................................................ 14
Other information
Trouble-shooting ......................................................................................... 21
Specifications............................................................................................. 22
TV signal system......................................................................................... 23
1006

02.............................................................................................................................................
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use thisapparatusnear water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near anyheat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two bladesand a third grounding
prong. The wide blade or the third prong are provided for your safety. If the provided plug doesnot
fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10.Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11. Onlyuse attachments/accessories specified by the manufacturer.
12.Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cartis used, use caution when
moving the cart/ apparatus combination to avoid injury from tip-over.
13.Unplug thisapparatusduring lightning storms or when unused for long periods of
time.
14.Refer all servicing to qualified service personnel. Servicing is required when the apparatushas
been damaged in any way, such as power-supply cord or plug isdamaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or hasbeen dropped.
15.Apparatus shall not be exposed to dripping or splashing and no objects fill with liquids, such as
vases, shall be placed on the apparatus.
16.To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts
inside. Refer servicing to qualified service personnel.
17.The readily operable appliance coupler will serve as the disconnect device of this apparatus.
18.The apparatus must be connected to a mains socket outlet with a protected earthing connection.
19.Keep 10cm minimum distance around the apparatus for sufficient ventilation.
20.Spent or discharged batteries must be recycled or disposed of properly in compliance with all
applicable laws.
For detailed information, contact your local county solid waste authority.
21.Please change to appropriate power cord complied with local regulation when the LCD TV
purchased and utilized at different nations.
The lightning flash with arrow head symbol, within an equilateral triangle, isintended
to alert the user to the presence of uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence ofimportant operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
"CAUTION"
These servicing instructions are for use by qualified service personnel only. To reduce the risk of
electric shockdo not perform any servicing other than that contained in the operating instructions
unless you are qualified to do so.
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
WARNING: TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, D O NOT EXPOSE THIS PRODUC T
TO RAIN OR MOIS TURE.

.......................................................................................................................................... 03
Cautions
[Caution]
To protect your device from electrical damage, be sure to plug the cord into socket securely.
[Caution]
If you use the LCDTV with video games, computers, or similar products, keep brightness
and contrast at a lowlevel. Images with a high levels of brightness or contrast the may "burn
on" the screen permanently.
[Tips for cleaning the LCD TV]
1. Wipe the LCD TV with soft or dry cloth.
2. DO NOT use solvent ormethyl benzene. Harsh chemicalsmay damage your LCD TV.
3. Make sure the LCDTV is unplugged before you clean it.
4. This equipment is for entertainment use only.
5. Visual Display tasks are exclude.
[CATV]
Be sure to acquire due authorization from the broadcaster/CATV service provider/program owner
before using the TV receiver to watch programs through UHF, VHF, or CATV.
[Installation and use of LCD TV]
1. Check the LCD TV power specification shown on the serial No./model tag. Be sure to use the
power according to the specification. If you are unsure about the power requirement, please
contact your distributor or local power company.
2. Make sure to plug into the poser cable into the socket securely. If you have problems plugging in,
please contact your distributor.
The plug is designed in such a manner that you can plug into a socket in a certain
direction. If you have problems with the plug, contact with your distributor.
1. DO NOT overload powers sockets or extension cords. Overloading poses a risk of electric shock
or fire.
2. DO NOT place any objects on the power cord. Keep your LCD TV away from any place that might
cause damage to the LCD TV. Use only the correct power cord.
3. Be sure to turn off your LCD TV when not in use. If the LCD TV will not be in use for a long time,
unplug it to prevent risk of fire.
4. The vent on the rear of the LCDTV is designed for ventilation and heat dissipation. Keep the vent
clear.
5. DO NOT place the LCDTV on beds, sofas, or carpet, as this may block the vent.
6. DO NOT use the LCD TV in enclosed spaces, such as a bookshelf or TV cabinet as this may
block the vent.
7. Keep the LCDTV away from high-temperature objects or any heat-generating object.
8. Keep the LCDTV away from direct unlight.
9. DO NOT place the LCDTV on an unstable shelf or desk. Failing to do so may result in injury.
10.DO NOT allow foreign objectsinside the LCDTV, as this poses a risk of electric shock or damage
to the internal components.
11.When transporting the TV, never carry it by holding onto the speakers. Be sure to always carry the
TV by two people holding it with two hands.

04.............................................................................................................................................
Cautions
[Maintenance]
If any of following occurs, unplug the LCD TV and contact your distributor or qualified technician to
repair the LCDTV:
1. The power cord or plug is damaged.
2. Liquid enters the LCDTV.
3. LCDTV is damp or wet.
4. LCDTV is damaged.
5. LCDTV malfunctions.
DO NOT attempt to repair the LCD TV by yourself. There are high voltagesinside the cabinet
which poses a risk of electric shock.
Changing parts
If the LCDTV requires new parts, ask the technician for written proof the new parts are specified by
the manufacturer and function are the same as the original parts.
Safety inspection
After the LCD TV is repaired, be sure to ask the technician (in accordance with the manufacturer's
requirements) to conduct a routine safetyinspection to make sure the LCDTV is safe.
If the LCDTV has been used longer than itslife, please contact qualified technician for repair.
[User's record]
You can find the serial number and model on the back of the LCDTV. Be sure to provide the model
and serial number when you contact your distributor.
Please read and comply with all warnings, cautions, and instructionsin the manual thoroughly.
Failing to do so may void your warranty. Modifying the LCDTV in such a manner not approved
by thismanual will also void your warranty.
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and (2) thisdevice must accept any interference
received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the useris
encouraged to try to correct the interference by one or more of the following measures:
* Reorient or relocate the receiving antenna
* Increase the separation between the equipment and receiver
* Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected
Caution: To comply with the limits for an FCC Class B computing device, always use the signal cord
and power cord supplied with thisunit. The Federal Communications Commission warns that changes
or modifications to the unit not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
European Notice
Products with the CE Marking comply with both the EMC Directive (89/336/EEC), (93/68/EEC) and
the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community.

.......................................................................................................................................... 05 Model T3714C
Descriptions and accessories
Accessories
1. Power cord (USA, England or Europe)
For Europe: A VDE certified power supply cord has to be used with this equipment for Germany.
The power cord rated 250V, 10A minimum, according to IEC 60227, H05VV-F or
VW-1, 0.75 mm2x 3G should be used.
For USA: NEMA 5-15P, Type SVT or SPT-2, 18 AWG, min. 7A/125V, 3G.
2. Remote control
3. AAA battery X 2
Installation of batteries
1. Insert two AAA batteries into the Remote
control. Make sure + and - are facing the
proper direction.
2. Replace the cover.
If the remote control is not to be used for a long time, remove the batteries.
Use the remote control carefully. DO NOT drop the remote control on the ground.
Keep the remote control away from moisture, sunlight,and high temperatures.
[
Caution
]
Please attach I/O coverin normal use
condition
Top View Control panel
Side View
Front view LCD Panel
Speakers
Front I/O
Video Connectors
Power LED
IR Remote receiver
Video & Antenna
Connectors
PC Connectors
Power Connector

06.............................................................................................................................................
-PAL
PAL
LCD TV installation method Connectors and sockets
AV and Antenna Connection (for PAL)
Port Functions
Scart 1
A connector for Europe which uses the same connector to transmit AV; SRGB
and Audio input signals; TV and Audio out signals.
Scart 2 & Scart
2-S
A connector for Europe, which uses the same connector to transmit AV,
SRGB, Audio and S(Y/C) input signals; by main screen(TV, AV, Scart1/AV)
and Audio out signals.
S-Video and R/L
Audio Input
S-Video (Y/C) or composite video and sound audio signal (R/L) connectors.
If you connect S-Video & Composite video at the same time, S-Video has
priority.
If you want to use composite video, you must un-plug S-Video cable.
Tuner Input TV RF signalsinput (antenna/CATV).
SET-TOP-BOX DVD player
(Europe Region)
(Red)
(White)
(Yellow)
(Yellow)
or
(Red) (White)
VCR

.......................................................................................................................................... 07
PAL
PAL-
LCD TV installation method Connectors and sockets
Front I/O
Video Connectors
Port Functions
S-Video and R/L
Audio Input
S-Video (Y/C) or composite video and sound audio signal (R/L) connectors. If
you connect S-Video & Composite video at the same time, S-Video has
priority. If you want to use composite video, you must un-plug S-Video cable.
Earphone Output Connects to headphones (16Ωor 32Ω).
VCR
(Yellow) (White) (Red)
or
(Yellow) (White) (Red)

08.............................................................................................................................................
PAL
LCD TV installation method Connectors and sockets
PC & Audio Output Connection (for PAL)
Port Functions
Component and
R/L Audio Input
Connects to devices which support YPbPr(R/L), for example, DVD
(Progressive support) players and hi-HDTV decoders or satellite receiver to
give picture with maximum resolution and the sound signal quality (R/L
connector).
PC & HDTV Audio
Input
When LCD TV isin VGA/DVI mode, this connects to the audio output from the
PC. When the DVI port is used with an HDTV source, this can be used for
audio input by using a cable with RCA plugs converted to stereo mini jack
plug.
VGA Input
(analog)
Connects to VGA analog signal sources; for use with a PC.
HDMI Input
(digital)
High Definition Multimedia Interface
Connects to devices compatible with digital input signalsand can be used with
PC or HDTV video signals. HDTV support timing: 1080i, 720P, 576i, 576P,
480i and 480P; PCmode support timing: 480P (640x480).
* denotes optional item
HDTV decoder
(Red) (Blue)(Green) (White) (Red)
(Red)
(White)
(Red)
(Blue)
(Green)
(Optional)
PC
*

.......................................................................................................................................... 09
PAL
Model T3714C
LCD TV installation method Connectors and sockets
Power Connection
Attach the AC power cord to the LCD-TV and plug into an appropriate wall outlet.
Turn the power on at the main switch (Next to the power
socket) to put the LCDTV into standby mode. The
standby indicator on the front will light up in red.
Power outlets differ from region to region.
Turning the LCD TV on
Press the POWER button on the front lower right of the TV to turn on the power or enter standby
mode.
Due to unstable local voltage, there will occasionally be a delayin POWER ON when the LCD
TV is switched on.
Programming TV channels
1. Press the SOURCE button on the remote control or on the control panel of LCD TV to select TV
mode.
2. Press the MENU button on the remote control to display the OSD menu.
3. Press the button on the remote to highlight TV Setup and press the button to select TV
Setup
4. Press the button on your remote to highlight Auto Program Sort (APS) and press the button
to select Auto Program Sort (APS)
5. Press the  buttons to select your country.
6. Press the buttons to select Start APS, and press the button to start the tuning process.
(This will take a few minutes. The tuning process will find all available channels.)
7. You can watch TV now. Change channelsby pressing the P and P buttons.
Power indicator
Status
Green -- Power on
Red ---- Standby.
Power
few minutes

10.............................................................................................................................................
PAL
Model T3714C
LCD TV operation Control panel keys
Button Description
MENU
Use thisbutton to display and adjust the features in the On-Screen Display.
Use the four arrow keys (channel and volume adjustments) to navigate the
menu options.
CHANNEL
FUNCTION/
Use these buttons to switch between preprogrammed channels.
Use these buttons to move between functions in the OSD.
VOLUME +/ -
ADJUST /
Use these two buttons to adjust the volume.
Use these buttons to adjust the values of a function.
SOURCE
Use thisbutton to change between video input signals.
Press the SOURCE button repeatedly to scroll through the following list of
inputs:
PAL&SECAM (for Europe): TV/SAV 1/SAV 2/SCART 1/SCART 2/SCART2-S/
YPbPr/HDMI/VGA(PC) mode.

...........................................................................................................................................11
PAL
PAL-
LCD TV operation Remote control
1. POWER
Press to turn on the LCDTV or enter standbymode.
2. MUTE
Press to toggle audio on and off. You can also press
volume +/- to restore the previous volume level.
3. FREEZE
Press to freeze the picture. Press again to revert to
live viewing
4. SLEEP
Press repeatedly to set the sleep timer.The timer
has intervalsof OFF/30/60/90/120 minutes.
PIP (Picture in picture)..... Please refer to P12 for
details
5. PIP SOURCE
Press to select the sub picture's signal source.
6. SWAP
Switches between the main picture and the sub
picture in PIP mode.
7. PIP-POSITION (position of sub picture)
Changes the position of the sub picture under PIP
mode.
8. PIP-SIZE (size of sub picture)
Press to activate Picture In Picture (PIP) mode.
Press again to changes the size of sub picture
under PIP mode. Two screen sizesare available.
Press again to close PIP mode.
9. MAIN AUDIO
Selects MAIN (main picture) audio in PIP mode.
10.PIP AUDIO
Select PIP (sub picture) audio in PIP mode.
..............................................................................
11.VOLUME +/-
Adjusts the LCDTV volume.
12.Program
Selects the Channel
13.0~9
Press 0~9 to select channels directly
14.RETURN
Returns to the previous channel.
15.INFORMATION (i)
Press the INFORMATION button to display the
current signal status, including input
source/channel/audio mode.

12.............................................................................................................................................-PAL
PAL
LCD TV operation Remote control
TELETEXT (Designed for Europe PAL/SECAM
system only)...........................................................
16. TEXT/MIX
Press this button to activate Teletext. Press again to
activate Teletext with TV Press again to turn off
Teletext.
17. UPDATE
Enter the page number then press the (UPDATE)
button and the teletext will display the page you
selected after searching. The page number is
displayed at the top side of screen.
18. INDEX
Press this button to return to page 100 or the index
page; and then press 0 to 9. The teletext page will
be numbered and added to the page you select or
the secondaryitem.
19. SUB
Displays the sub page (when available).
20. PAGE UP& DOWN
Press this button then the number keys to select the
page you want view.
21. REVEAL
Revealshidden information such as answers to a
quiz.
22. SIZE
Press this button to change the font size: Full screen,
Top half and Bottom half.
- FULL(full screen) standard f ull-screentext
- TOP(top half) top half of page appears on the
full screen
- BOTTOM(bottom half) bottom half of page appears on
the full screen.
23. HOLD
Press this button to stop the scrolling of pages.
The text decoder stops receiving data.
24. R/G/Y/B
Press this button to select the pictures with various
colors of text. Different channels display different
functions.
..............................................................................
25. ASPECT (screen scaling)
Changes the aspect ratio. Choose from
Auto 16:9 4:3 Movie Exp. Char Exp.
26. PICTURE
Selects advanced picture settings.
User 1/User 2/Fantastic/Standard/Movie
27. AUDIO
Selects STEREO, MONO, DUAL 1 and DUAL 2.
If there is no second language available for the
signal received, LCDTV will audio output bymono.
28. SOURCE
Switches between signal sources.
29.MENU 








Press MENU to activate the LCD TV OSD. Press
again to close the OSD. Press







to navigate
and confirm your selection.

.......................................................................................................................................... 13
Display menu Display modes
Main picture mode
1. You can select the signal source of the main picture using the remote control.
PAL&SECAM(for European region): TV/SAV 1/SAV 2/SCART 1/SCART
2/SCART2-S/YPbPr/HDMI/ PC(VGA)mode.
2. The selected signal source appears on the upper right corner of the screen (Diagram 1).
3. You can set options for different modesin the OSD MENU.
PIP mode
1. The LCD TV can display the main signal and secondary input signals simultaneously.
The secondary signal (or input source) appears in a frame in the main picture. Thisis known as
PIP sub picture (diagram 1). To activate PIP mode, press the SIZE button on the Remote control.
2. Select the PIP input source from the PIP Source button on the Remote control.
(There isno PIP button on the LCD TV control panel.)
3. The secondary signal options change as the main signal source changes. (Diagram 2)
(Diagram 2)
The signal source
Main signal Sub signal
Main signal
Audio mode
Audio mode
Sub signal
Channel
Speaker out
(Diagram 1)
Main signal
Sub signal

14.............................................................................................................................................
Display me nu Using the advanced menu
1. Use the SOURCE button on the remote control to select the required mode.
Once the signal source is detected, the selected system mode appears in the upper right corner of
the screen.
2. After the system mode is selected, press the MENUbuttons to perform the following functions:
DISPLAY
Showsmore picture modes and functions based on your favorite channelsand
enables you to adjust the color and brightness setup.
Enables you to configure advanced picture settings.
AUDIO
Provides more audio selections. You can also set the audio environment of the LCD
TV.
GEOMETRIC (for use in PC mode)
Enables you to adjust the position and sharpness of the picture.
TV SETUP(for use with TV mode)
Enables you to adjust cable or antenna signal settings.
SYSTEM
Enables you to set the OSD language and OSD background.

.......................................................................................................................................... 15
Display me nu Using the ad vanced menu
DISPLAY
1. Press the MENU button on the remote control to display the main menu.
2. Press the  buttons on the remote control to select the DISPLAY.
3. Press the ►button on the remote control to enter the submenu.
4. Press the  buttons on the remote control to select the item to be adjusted.
5. Press the ►button on the remote control to confirm your choice.
6. Press  buttonson the remote control to adjust the setting.
7. Press the MENU again to quit the picture.
Menu Descriptions
Picture Mode
Press  to select the advanced picture setting.
User1 /User2/ Fantastic /Standard /Movie (Video Mode)
User1 /User2 (VGA Mode)
Brightness Press  to make the picture brighter or darker.
The adjustment range is 0~100
Contrast Press  to increase or decrease the picture contrast.
The adjustment range is 0~100
Saturation Press  to adjust color saturation.
The adjustment range is 0~100
Hue Press  to change the hue to make it redder or greener.
The adjustment range is -50 ~ 0 ~ 50
Sharpness Press  to make the picture sharper or softer.
The adjustment range is 0~100
ColorTemp. Press  to adjust the color temperature.
Cool / Default / Warm
Advanced Press to select the advanced picture setting.
Noise Reduction Press  to select a level of noise reduction.
Strong /Weak / OFF
Film Mode
Press  to display 3:2 or 2:2 movie picture size when source signal is
received.
Auto / OFF
Black White Exp.
Press  to advance the color depth for the picture.
Weak / Strong / OFF
Vertical
Sharpness
Press  to advance the image sharpness.
Weak / Strong / OFF
Default Press to restore all Display parameters to their default settings.

16.............................................................................................................................................
Display me nu Using the ad vanced menu
AUDIO
1. Press the MENU button on the remote control to display the main menu.
2. Press the  buttons on the remote control to select the AUDIO.
3. Press the ►button on the remote control to enter the submenu.
4. Press the  buttons on the remote control to select the item to be adjusted.
5. Press the ►button on the remote control to confirm your choice.
6. Press  buttonson the remote control to adjust the setting.
7. Press the MENU again to quit the picture.
Menu Descriptions
Sound Mode
Press the  buttons to select the sound mode.
User1 / User2 / Fantasic /Standard / Movie (Video Mode)
User1 / User2 (VGA Mode)
Balance Press the  buttons to adjust the balance between right and left speakers.
he adjustment range is -50~ 0 ~50
Treble Press the  buttons to increase or decrease the audio treble level.
The adjustment range is 0~100
Bass Press the  buttons to increase or decrease the audio bass level.
The adjustment range is 0~100
Surround Select ON or OFF to activate or inactivate the surround sound function.
Press to adjust earphone settings.
Balance : Between right and left speakers. The adjustment range is -50~0~50
Treble : The adjustment range is 0~100
Ear Phone
Bass : The adjustment range is 0~100
HDMI Audio In Press the  buttons to select the HDMI Audio In. (Only for HDMI Mode)
HDMI Audio In / PC Audio In
Default Press to return all audio parameters to their default settings.

.......................................................................................................................................... 17
Display me nu Using the ad vanced menu
GEOMETRY (for VGA)
1. Press the MENU button on the remote control to display the main menu.
2. Press the  buttons on the remote control to select the DEOMETRIC.
3. Press the ►button on the remote control to enter the submenu.
4. Press the  buttons on the remote control to select the item to be adjusted.
5. Press the ►button on the remote control to confirm your choice.
6. Press  buttonson the remote control to adjust the setting.
7. Press the MENU again to quit the picture.
Menu Descriptions
H-Position Press the  buttons to adjust the horizontal VGA position.
The adjustment range is -10~0~10
V-Position Press the  buttons to adjust the vertical VGA position.
The adjustment range is -10~0~10
Auto Position Automatic adjustment
Press the buttons to automaticallyadjust the picture setup.
Clock Press the  buttons to adjust the VGA alignment for stable VGA display.
The adjustment range is 0~100
Phase
Press the  buttons to adjust the focus and sharpness of VGA.
The adjustment range is 0~100.
In PCmodel, if the picture quality fails to meet your maximum expectation when
“Auto” ispressed, please adjust the “Phase” function to do manual calibration for
refining picture quality.
Recall Press this button to restore all Geometric parameters to their default settings.

18.............................................................................................................................................
-PAL
Display me nu Using the ad vanced menu
TV Setup (forTV)
1. Press the MENU button on the remote control to display the main menu.
2. Press the  buttons on the remote control to select the TV SETUP.
3. Press the ►button on the remote control to enter the submenu.
4. Press the  buttons on the remote control to select the item to be adjusted.
5. Press the ►button on the remote control to confirm your choice.
6. Press  buttonson the remote control toadjust the setting.
7. Press the MENU again to quit the picture.
Menu Descriptions
Program Table This option provides channel edition on sequence, channel skip and frequency
fine tuning in the range of 3MHz. (Refer to next page for details)
Auto Program (APS)
Country Press the  buttons to select your country.
Start APS
Automatic channel scanning
Press the button to execute automatic channel scanning. Automatic channel
scanning must be executed when you install your LCDTV for the first time.

.......................................................................................................................................... 19
PAL
-
PAL
Display me nu Using the ad vanced menu
TV SETUP (forTV)
Program Table:
Use the  buttons on the remote control to highlight the
button to edit in yellow, and then press the button on the
remote control to enter the Tuning table. (Next Figure)
After entering the Tuning Table, use the  button to edit
the program.
Refer to the following for description.
Swap program No : Use the  buttons to choose which channel to change from channel 0 to 99.
Edit Name : Use the 0~9 number keys to edit name.
Press the "MENU" button to confirm the name setting.
Press the number buttons to select your required letters:
Press 2 to cycle through "2, A, B, C, @".
Press 3, for “3, D, E, F, #", etc.
(refer the table on the right hand side)
Color Norm & Audio Norm :
Use the  buttons to choose which TV system to
represent the screen.
If you live in an area which can receive different TV
systems you may choose to change the default system to the system used in your area.
Color Norm: PAL -> SECAM
Audio Norm: D/K -> I -> B/G ->L ->LP
Skip : “ON” means (skip on) and “OFF” means (skip off).
Fine Tuning : Manually adjust the frequency for variation of each channels to get a better image
quality, but it will be fixed the frequency after adjustment unless re-update scan.

20.............................................................................................................................................
Display me nu Using the ad vanced menu
SYSTEM
1. Press the MENU button on the remote control to display the main menu.
2. Press the  buttons on the remote control to select the SYSTEM.
3. Press the ►button on the remote control to enter the submenu.
4. Press the  buttons on the remote control to select the item to be adjusted.
5. Press the ►button on the remote control to confirm your choice.
6. Press  buttonson the remote control to adjust the setting.
7. Press the MENU again to quit the picture.
Menu Descriptions
BackLight Press the  buttons to make the BackLight brighter or darker.
The adjustment range is 0~10
Language
Press the  buttons to select language.
English / Deutsch(German) / Francais(French) /Polski (Polish)/ Italiano(Italian) /
Espanol(Spanish) / Nederlands(Dutch) / голл. (Russian).
OSDTimeout Press the  buttons to select the time to be shown on OSD Timeout.
15 / 20 / 25 seconds
Teletext Lang. Press the  buttons to select the Teletext Lang.
West Europe / East Europe / Cyrillic / Greek / Arabic.
Blue Screen Press the  buttons to select the screen background color.
ON / OFF
No Signal
Press the  buttons to select the time to be to shut off when no any signal
input.
OFF / 30 / 60 minutes
Default Press to return all system parameters to their default settings.