Mitek Sports Medicine FMS SOLO User manual

QUICK SETUP GUIDE
fms solo®
Setup Diagram
[light backgrounds]
[
[light backgrounds]
[dark backgrounds]
[Black&White Only]
[Red Surface]
[One-Color 185]
fms solo®
Fluid Management System with Shaver Interface
(Disposable Tubing Setup)
fms solo
®Parts List
Sterile procedures should be followed wherever appropriate.
(Reference Product Manuals and Instructions For Use for complete instructions)
PRESSURECYCLE
®
Fill
Chamber
RUN/STOP
Pressure Cycle
Remote
Control
PRESSURE
ALARM
I
R
R
I
G
A
T
I
O
N
Advanced Irrigation Pump
®
pressure
Run
Stop
Transparent Safety Cover 1
Tension Rocker Arm 2
Irrigation Roller Pump 3
Irrigation Auto-Locking Port.4
Tube Holder.5
Fill Chamber Button 6
Fill Chamber Holder 7
8Pressure Display
9Power Button
10 Alarm
11Pressure Transducer Port
12 Pump Run/Stop Button
13 Pressure Adjustment Buttons
14Pressure Cycle Button
Ports and Connectors on the Back
Shaver Interface Cable
Shaver Interface Power Cable
fms solo®Power Cable Foot Pedal
Basic Features on the Front
INFLOW
REF : 4580
SERIALNUMBER :
SHAVER INTERFACE
FOOT PEDAL
INPUTPOWER:
0197
IP54
TYPE B
CLASS I
REPLACEFUSES AS MARKED
120/230V~50-60Hz
500VA
DONOTREMOVE CONNECTOR WITHOUT
HAVINGTURNED OFF THE DEVICE.
CAUTION :
Advanced Irrigation Pump
®
Irrigation Tube
Intermediary Irrigation Tube without One-way Valve
Clamp
Clamp
Clamp
Clamp
Auto-Locking Device Pressure Chamber
1
2
8
9
3
4
5
1
2
3
4
5
13 14
7
10
12
11
6
Irrigation tube
Red pedal is a timed cycle to
control bleeding
2Portals in the knee
1-800-382-4682 www.depuymitek.com
©DePuy Mitek, Inc. 2008. All rights reserved. Printed in the USA.
P/N 901012. Rev. A 03/08
1On/Off Switch
2Fuses
3Power Socket
4Shaver Interface Port
5Foot Pedal Port

SHAVERINTERFACE
PRESSURECYCLE
A.Connecting the Irrigation Tube
Quick Setup Guide (for Disposable Tubing)
1
2
3
a
g
b
c
d
e
f
Fill
Chamber
G
AdvancedIrrigationPump
®
I
R
R
I
G
A
T
I
O
N
Fill
Chamber
AdvancedIrrigationPump
®
I
R
R
I
G
A
T
I
O
N
a
a
a
b
Fill
Chamber
AdvancedIrrigationPump
®
I
R
R
I
G
A
T
I
O
N
c
d
4
Fill
Chamber
GROUP
LEGALMANUFACTURER:
DISTRIBUTEDBY:
FUTUREMEDICAL SYSTEMS SA
265,Route de la Baronne
06640SAINT JEANNET
FRANCE
www.fmsgroup.com
TheManufacturerandLicensed Seller of thi sdevicedo not accept any liability for direct or consequential
damageorinjurycaused by its improper use,or usage of disposables other than FMS products.
Anyalterationto this device, repair from unlicensed service center, or use ofnon FMS disposables will void
CEmarking,warranty, and product liability coverage.
Thisdeviceiscovered under the following patents: US PATENT 4902 277 , 5 000 733 , 5 131823
EUROPEANPATENTS0 306445, 0448909 - JAPANESE PATENT 2 107 259, 2 892 852 - Other patents
pending
FUTUREMEDICAL SYSTEMS SA
38Chemin du Grand-Puits
1217GENEVA
SWITZERLAND
FUTUREMEDICAL SYSTEMS,Inc.
504McCormick Drive
GLENBURNIE, MD 21061
USA
®REGISTEREDTRADEMARKofFUTURE MEDICAL SYSTEM SA
REF: 4580
SERIALNUMBER :
SHAVERINTERFACE
FOOTPEDAL
IMPORTANTWARNING
ELECTRICSHOCK HAZARD. DO NOT REMOVE COVER
REFERSERVICING TO QUALIFIED SERVICE PERSONNEL.
DECKELNICHTENTFERNEN-ELEKTROSCHOCKGEFAHR!
SERVICENURVONEINGEWIESENEM FACHPERSONAL DURCHFÜHREN LASSEN
PRISEELECTRIQUE-NEPAS ENLEVER LE COURVERCLE.
NEMETTREEN SERVICEQUE PAR DU PERSONNELQUALIFIE.
INPUTPOWER:
0197
IP54
TYPE B
CLASS I
REPLACEFUSES AS MARKED
120/230V~50-60Hz
500VA
CAUTION:
VORSICHT:
ATTENTION:
DONOT REMOVE CONNECTOR WITHOUT
HAVINGTURNEDOFF THE DEVICE.
CAUTION:
Advanced Irrigation Pump
®
ab
a: Connect the pressure transducer tube into the fill
chamber port. Turnclockwise until snug.
b:Turn pump on by pressing Iswitch on back.
c:Close lid and press POWER STAND-BY button.
d: Remove caps off irrigation spikes.
5a: Insert spikes into irrigation bags.
b: Open two (2) clamps on irrigation tubes.
c:Press RUN STOP button. Prime pump to fifty (50).
d:Press FILL CHAMBER button to pump fluid into
the chamber. Repeat until fluid rises to indicator
window (1/3 full).
e: Twist cap off irrigation tube.
Fill
Chamber
RUN/STOP
PressureCycle
Remote
Control
PRESSURE
ALARM
Advanced Irrigation Pump
®
pressure
Run
Stop
b
c
a
Fill
Chamber
RUN/STOP
PressureCycle
Remote
Control
PRESSURE
ALARM
Advanced Irrigation Pump
®
pressure
Run
Stop
a:Lift lids and roller arm, then slide the green part of
the tube into the auto-locking feature on the pump.
b:Place and center the tube around the roller. Pull
on the tube and close the tension rocker arm
against the tube.
c: Position the pressure chamber in the holder.
d: Twist cap off of the pressure transducer tube.
a: Remove irrigation tube from the package
and close three (3) white clamps on the
irrigation tube.
1a: Remove the intermediary irrigation tube
without one-way valve from the package
and close the white clamp.
b: Twist blue cap off the intermediary
irrigation tube.
a:Insert power cable into socket.
b:Attach the foot pedal connector
to the port.
c:Attach shaver interface connector
to the port.
d: Insert power cable into interface cable.
e: Connect interface cable to shaver box.
f: Connect shaver to interface cable.
g: Insert power cables into wall socket.
Fill
Chamber
RUN/STOP
PressureCycle
Remote
Control
PRESSURE
ALARM
Advanced IrrigationPump
®
pressure
Run
Stop
®
d
c
d
e
INFLOW
2a: Connect the irrigation tube to the intermediary irrigation
tube without one-way valve by screwing the two blue
connector ends together until snug.
b: Open both clamps until fluid exits the tube. Close the clamp
nearest the end of the tube after fluid is released and place
in the sterile field.
b
fms solo®
B. Connecting the Intermediary Irrigation Tube (without One-way Valve)
grounds]
[
a
INFLOW
Fill
RUN/STOP
PressureCycle
Remote
Control
PRESSURE
ALARM
Advanced Irrigation Pump
®
pressure
Run
Stop
Chamber
b
a
3a: Connect the tube marked INFLOW to the arthroscopic
scope sheath.
INFLOW
a