Mocka Kids Cubby House User manual

Kids Cubby House
1
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
Long Screw
x12
Phillips screwdriver required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
B
Small Screw
x35
C
Door Stop
x 1
WARNING!
Not suitable for children under 3 years of age

Kids Cubby House
2
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Safety
WARNING - Only adults should assemble or disassemble this product.
WARNING - This product may contain sharp edges and small parts prior to
assembly - product must be assembled by an adult
WARNING - This product is safely designed for children between the ages of
3 years and up.
WARNING - Adult supervision of children is required at all times when on or
around this product. We advise that parents should observe and ensure that
their children have the strength and skills to enjoy all the equipment safely
before using them on their own.
WARNING - To prevent serious injury do not allow children to play on the
product until it is completely assembled and installed.
WARNING - Children using this product should only use the product in the
manner intended. i.e. do not climb on the unit.
WARNING - This unit must be placed on a level surface at least 2m from
any structure or obstruction such as a fence, garage, house, overhanging
branches, laundry lines or electrical wires.
WARNING - Not to be installed over concrete asphalt or any other hard
surface.
WARNING - Modifications made to this product (e.g. adding an accessory)
shall be carried out according to the instructions of the manufacturer.
Timber
Our product was manufactured from premium timber with great care dealt
in selecting, machining and treating the timber before it is sold to you.
Bear in mind that timber is a natural product and may experience changes
throughout the course of its life. It may:
• Develop openings (gaps, slits, apertures, cracks) along the line of the
grain. This occurs due to moisture content between internal and outer
surfaces of the timber. It is totally acceptable and will not affect the
integral strength, life or guarantee of the product.
• Fade as the timber reacts with sunlight. The timber should be treated
with a proprietary product to act as a protective barrier (i.e. a water
repellent on an annual basis)
• Warp and distort its shape. Any distortion will be slight and will not affect
the safety or enjoyment of this product.
Care and Maintenance
We recommend regular maintenance should be conducted at the
beginning of each season for your play equipment to ensure all main
parts/fixings are tightly secured, well-oiled and intact to avoid injury or
hazard.
We advise the following tips where applicable:
1. Tighten all hardware, but do not over tighten , as this may crack the
wood.
2. Lubricate all metallic moving parts.
3. Check all protective coverings on bolts, pipes, edges and corners.
Replace if they are loose, cracked or missing.
4. Check metal parts for rust. Replace as needed.
5. Prevent weathering by applying protective barriers to your timber via
proprietary products to maintain its quality.
6. Attachments must be regularly examined for evidence of deterioration.
Replace any attachments if there are signs of deterioration.

2
3
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach 2 x panels [4] to panel [2] and secure with 6 x long screws (A).
Tighten with a screwdriver.
Kids Cubby House
4
42
A
A
A
A
A
A
1
Attach 1 x door stop (C) to the inside of panel [1] and secure with 2 x
small screws (B). Tighten with a screwdriver.
1
BB
C

Attach panel [1] to 2 x panels [4] and secure with 6 x long screws (A).
Tighten with a screwdriver.
3
4
1
4
2
A
A
A
A
A
A
4
4
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Kids Cubby House
Attach 2x panel [5] to panels [1] and panel [2] and secure with 8 x small
screws (B). Tighten with a screwdriver.
B
B
B
BB
B
B
B
4
1
4
2
5

Attach 4 x panels [7] to panel [5] and secure with 12 x small screws (B).
Tighten with a screwdriver. Once assembled lift into place, do not drag.
You’re done, enjoy!
6
Kids Cubby House
5
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
5
Attach panel [3] to panels [5] and secure with 4 x small screws (B).
Attach 3 x panels [6] to the windows in panels panels [4] and [2] and
secure with 9 x small screws (B). Tighten with a screwdriver.
3
5
6
B
BBB
B
BB
4
4
2
7
7
7
7
5
B
B
B
B
B
B
B
B
B
B
B
B