Creative Play CP073 User manual

DEN MAKING TEEPEE
Installation Instructions
REF: CP073 - DEN MAKING TEEPEE
pg 1 of 7

pg 2 of 7 REF: CP073 - DEN MAKING TEEPEE
PARTS required
x3 (CP004b) x3 (HEXA GRIP PANELS)
x3 (CP004a)
x15 (FM80 ‘WOOD SCREWS’)
x6 (FM180 ‘WOOD SCREWS’)
x3 (‘NYLOCS’ M12 - Nylon locking nuts)
x6 (Covered end cap R60)
NOT STANDARD END CAP - has a radius
cut into it
x3 (M12x220 BOLTS)

pg 3 of 7 REF: CP073 - DEN MAKING TEEPEE
TOOLS required

pg 4 of 7 REF: CP073 - DEN MAKING TEEPEE
Foundation Details
SOIL
TIMBER SUPPORT POST
CONCRETE

pg 5 of 7 REF: CP073 - DEN MAKING TEEPEE
Attach the HEXA GRIP PAN-
ELS to the TIMBERS
Using 5 x FM80 WOOD SCREWS (for each panel)
1
NOTES:
View shown below and below right is
from BACK
Installation Instructions
1755
1661

pg 6 of 7 REF: CP073 - DEN MAKING TEEPEE
Position the assembled panels
Drill 14mm HOLES
through the timbers
2
3
Installation Instructions
1
2
3
*Holes to be drilled at different
heights to ensure holes do not cross

pg 7 of 7 REF: CP073 - DEN MAKING TEEPEE
*covered end R-60 to be used
NOT standard end caps
Bolt the TIMBERS together
Using 3 x M12x220 HEX BOLTS / 3 x M12 NYLOCS / 6 x COVERED END R60
SCREW the timbers together
Using 3 x FM180 WOOD SCREWS / 3 x COVERED END R60
4
OR (if not drilled)
5
Installation Instructions