MonsterShop 24409 User manual

Try Monster - Buy Monster - Be Monster
Double & Triple
Wheelie Bin Storage
24409/24410
M onster
Shop

Specicaon
Product Descripon
English
Thank you for purchasing this Wheelie Bin Storage shed.
You are looking out from your window. Your garden is looking splendid. All the me and hard
work seems worth it. But the view is hindered, spoiled by unsightly, ugly bins. It’s a problem we
at Monster Group UK have ourselves, unl now!
The Wheelie Bin Storage shed perfectly conceals two or three (depending on your order) 240L
UK Standard Wheelie Bins and helps you reclaim your garden! With a quick and easy assemble,
liing lids aached to your bin lids, and treated, ethically-sourced mber that is long-lasng
with a great-looking nish, you can feel relieved that you won’t have to suer with those
unpleasant views again. We just know you’ll love it!
WARNING: The assembly of this product requires two persons. Do not aempt to undertake
assembly alone.
We at Monster Group UK understand this is a new and excing purchase, and although it is
tempng to get stuck in please carefully read these instrucons before you begin the assembly.
Please refer to and read Safety Advice, Safe Working Pracce to ensure prevenon of injury
or damage to the product before starng.
Product Specics
Double Wheelie Bin Storage Triple Wheelie Bin Storage
Dimension (H x W x D) 122cm x 149cm x 92cm 120cm x 198cm x 81cm
Weight 26 KG 36 KG
Material Fir Wood Fir Wood
Monster Guarantee
If you wish to return a product in perfect working order, we provide a 30 day returns policy as
long as the item is unopened and in a resalable condion.
A 12 month warranty applies to all of our products; we will cover the cost of labour and parts.
Our policy is to try and repair the item before arranging an exchange or refund.
If for any reason a part is missing please get in touch with us within 7 days on receipt of your
order. You can contact our friendly and helpful Customer Support Team via email or call. For full
terms and condions contact our Support Department via the details on the Contact Us page.
Monster Group UK’s liability will be limited to the commercial value of the product only.

Item Contents - Panels
The assembly of both the Double and the Triple Wheelie Bin Storage is very similar. The com-
ponents, however, are dierent. For this reason, we have separated the Item Contents and
Assembly Instrucons for each product.
Double Wheelie Bin Storage
Part Part Name Quanty Illustraon
1Right Side
Panel
1 x
2Centre Panel 1 x
3Le Side Panel 1 x
4Lid Panel 1 x
5Lid Panel 1 x
6Back Panel 1 x

Part Part Name Quanty Illustraon
7Base Plate 2 x
8Le Door 1 x
9Right Door 1 x
Item Contents - Pieces
Part Part Name Quanty Illustraon
AScrew 26 x
B Screw 12 x
CScrew 8 x
DScrew 18 x
ELock Bracket 2 x
F Wall Bracket 2 x

Triple Wheelie Bin Storage
Part Part Name Quanty Illustraon
1Right Side
Panel
1 x
2Centre Panel 1 x
3Centre Panel 1 x
4Le Side Panel 1 x
5Lid Panel 1 x
6Lid Panel 1 x

Part Part Name Quanty Illustraon
7Lid Panel 1 x
8Back Panel 1 x
9Base Plate 3 x
10 Le Door 1 x
11 Centre Door 1 x
12 Right Door 1 x

Item Contents - Pieces
Part Part Name Quanty Illustraon
AScrew 39 x
B Screw 16 x
CScrew 12 x
DScrew 24 x
ELock Bracket 3 x
F Wall Bracket 2 x
User Guide
Assembly Instrucons
Double Wheelie Bin Storage
1) Align the Right Side Panel (1), Le Side Panel (3) and Centre Panel (2) as in Image 1. Use the
Back Panel (6) to connect all three panels and use 6 x D Screws per panel to aach. If you look
carefully at Image 6, you will noce the Back Panel (6) has ve arms on either side. The screws
must be aached by the top, boom, and middle arm.
NOTE: Check that you have used 18 x D Screws in total, as in Image 1.
IMAGE 1:

2) Now that the three main panels are con-
nected from the back, use 2 x Base Plates
(7) and place them between each panel at
the front. Align and use 4 x B Screws per
Base Plate. Use 8 x B Screws in total for this
secon. See Image 2 to check your progress.
IMAGE 2:
3) Place the rst Lid Panel (4) on top of the Right Side Panel (1) and Centre Panel (2). Using 4 x
C Screws, ghten into place. Look at Image 3. The lid is aached at the back of the
storage shed. See Image 3A. This is where you need to place the screws. Repeat this process for
the next Lid Panel (5).
IMAGE 3:
IMAGE 3A:
4) When aaching the doors, note that the hinges sit
inside the Centre Panel (2) and the doors swing out-
wards from the Centre Panel. Align the Right Door (9)
and use 6 x A Screws to aach. Repeat to aach the
Le Door (8), remembering to aach the hinge from
within the Centre Panel (2).
See Image 4 for reference.
NOTE: If necessary, you can aach the Wheelie Bin
Storage to another surface to ensure it remains sturdy
and in place. To do so, use 4 x B Screws to aach the
Wall Brackets to the structure, then use 4 x B Screws
to aach to another surface.
IMAGE 4:

5) Now aach the Lid Chain by using 1 x A Screw per chain into the appropriate panel. See
Image 5 for reference.
6) To aach the Lock Brackets (E), rst connect the Lock
Bases to the Le and Right Side Panel (1 & 3) using 4 x A Screws each. (8 x A Screws in total).
Then aach the Lock mechanisms to the Le and Right Doors (8 & 9) using 2 x A Screws each.
(4 x A Screws in total). See Image 5 for reference.
Your Double Wheelie Bin Storage is now ready for use!
IMAGE 5:
Triple Wheelie Bin Storage
1) Align the Right Side Panel (1), Le Side Panel (4) and both Centre Panels (2 & 3) as in Image
6. Use the Back Panel (8) to connect all four panels and use 6 x D Screws per panel to aach.
If you look carefully at Image 6, you will noce the Back Panel (8) has ve arms on either side.
The screws must be
aached by the top, boom, and middle arm.
NOTE: Check that you have used 24 x D Screws in total, as in Image 6.
IMAGE 6:

2) Now that the four main panels are con-
nected at the back, use the 3 x Base Plates
(9) and place them between each
panel at the front. Align and use 4 x B Screws
per Base Plate. Use 12 x B Screws in total
for this secon. See Image 7 to check your
progress.
IMAGE 7:
3) Now connect the Lid Panels (5, 6, & 7). Place the rst Lid Panel on top of the Right Side
Panel (1) and the rst Centre Panel (2).
4) Using 4 x C Screws, screw into place. Look at Image 8. The lid is aached at the back of the
storage shed. See Image 8A. This is where you need to place the screws. Repeat this process for
the remaining Lid Panels.
IMAGE 8:
IMAGE 8A:
5) When aaching the doors, note that the doors
swing outwards from the Centre Panels (2 & 3).
Align the Right Door (12) and use 6 x A Screws to
aach. Repeat to aach the Le Door (10) and
Centre Door 11) , remembering to aach the
hinge from within the Centre Panels (3 & 4). See
Image 4 for
reference.
NOTE: If necessary, you can aach the Wheel-
ie Bin Storage to another surface to ensure it
remains sturdy and in place. To do so, use 4 x B
Screws to aach the Wall Brackets to the struc-
ture, then use 4 x B Screws to aach to another
surface.
IMAGE 9: