Montessori Furniture Creative cooking User manual

ASSEMBLY DETAILS
Toy kitchen "Creative cooking"
282
64
312
80
480
150
676
150
124
156
165
676 257
64
64
257
1 - Left sidewall
1 pc.
4 - Lintel
1 pc.
5 - Baking tray
1 pc.
2 - Right sidewall
1 pc.
3 - Lower base
1 pc.
6 - Back wall
2 pcs.
9 - Owen door
1 pc.
10 - Plank
1 pc.
7 - Tabletop
1 pc.
8 - Front panel
1 pc.
11 - Kitchen sink
1 pc.
14 - Upper plank
2 pcs.
15 - Upper lintel
2 pcs.
12 - Cabinet door
1 pc.
13 - Upper sidewall
2 pcs.
16 - Upper back wall
1 pc.
19 - Left drawer
sidewal
1 pc.
20 - Right drawer
sidewall
1 pc.
17 - Microwave oven
door
1 pc.
18 - Drawer facade
1 pc.
21 - Drawer back
plank
1 pc.
24 - «Ericson» nut
2 pcs.
25 - Confirmat screw
5x40
45 pcs.
22 - Lower drawer
plank
1 pc.
23 - Under drawer
plank
1 pc.
26 - 3 mm hex key
1 pc.
29 - Screwdriver
1 pc.
30 - Self-tapping
screw 3x12 mm
12 pcs.
27 - 4 mm hex key
2 pcs.
28 - Set of minifixe
8 pcs.
31 - Shelf holder
6 pcs.
34 - Tap base
1 pc.
35 - Upper part
of the tap
1 pc.
32 - Screw with
a flat head
M6x20
2 pcs.
33 - Plastic lock
3 pcs.
36 - Screw
6.3x40
2 pcs.

1
31
4
31
30
33
30 33
3
25
31
Pic. 2
Take the Lintel (4) and using the Self-tapping screws (30), connect
the Plastic lock (33) and install the Shelf-holder (31). See Pic. 2
Pic. 3
Using the Confirmat screws (25) and 3 mm hex key (26), connect
the Lower base (3) to the previously assembled construction. Then
insert the Shelf-holder (31). See Pic. 3
Pic. 1
Take the Left sidewall (1) and install the Shelf-holders (31)
as shown in the picture 1.

30
33
930
33
9
23
25
9
8
1
4
5
37
40
Pic. 4
Now take the Owen door (9) and using the Self-tapping screws (30) and a
Screwdriver(29), connect the Plastic locks (33). See Pic.4
Pic. 5
Take the lintel (4) and using the confirmats (25), a key (26) and connect it to
the front panel (8) and a plank (23). Put the oven doors (9) onto the shelf
holder (31) and onto the lintel (4) fasten the sidewall (1) with
the confirmats (25). See Pic. 5.
Pic. 6
Using the Self-tapping screws (30) and a Screwdriver (29), fix the Lock (33).
Then install the Baking tray (5). See Pic. 6.

31
12 12
30
33
31
10
25
2
12
4
7
36
35
34
install the dowels from minifixes (28)
7
36
Pic. 8
Locate the Cabinet door (12) on the Shelf-holder (31) on the Lower base (3).
Then install the Plank (10) and screw with the Confirmar screws (25) from
the side of a Lintel (4). ʼConnect the Right sidewall (2) to the assembled
structure with the Confirmat screws (25). See Pic. 8
Pic. 9
Take the Tabletop (7) and using the Screwdriver (29), screw the dowels
from Minifixes (28). Then assemble together the tap base (34) and (35)
using the screws (36) and a key (27) and connect it to the tabletop.
See Pic. 9
Pic. 7
Take the Cabinet door (12) and fix the Lock (33) with the Screws (30).
Insert the Shelf-holders (31). See Pic. 7

6
6
25
31
17 17 31
30
33
15
30 33
Pic. 10
Pic. 11
Take the Microwave owen door (17) and using the Self-tapping screws (30), fix
the Lock (33). Above and beneath the doors (17), insert the Shelf-holders (31).
See Pic. 11
Insert the Back walls (6) into the gooved of Sidewalls (1,2) and screw
them with the Confirmat screws (25). Then install the Tabletop (7) onto
the previously assembed construction and close the Eccentrics (28) on
the Sidewalls (1,2) and a Lintel (4) clockwise. See Pic.10
Pic. 12
Connect the lock to one of the Upper lintels (15) with the Screws (30) and
fasten the lock (33). See Pic. 12

25
13
13
15
14
14
25
16
Pic. 13
Connect the Upper lintels (15) to one of the Upper planks (14), using
the Confirmat screws (25). Then connect the Upper sidewalls (13)
the same way using the screws (25). Insert the Microwave owen
door (17) with the Shelf-holder into the Upper plank (14). See Pic.13
Pic. 14
Take the previously assembled construction and insert the Upper plank (16)
into the groove on the Upper plank (14). Then put another plank (14) above
and screw together with Confirmat screws (25). See Pic. 14

18
install the dowels from minifixes (28)
18
19
20
21
22
25
Pic. 16
Take the Lower drawer plank (22) and using the Confirmat screws (25),
fix the Sidewalls and Back plank of a drawer (19,20,21). Then connect
the sidewall (19 and 20) with the back plank (21) . Insert the drawer
facade (18) and fasten the eccentrics on the planks (19 and 20)
clockwise with the screwdriver (29). See Pic. 16
Pic. 15
Take the Drawer facade (18) and using the Screwdriver (29), fix the dowels
from Minixises (28). See Pic. 15

25
24
23
32
24
Using the Self-tapping screws (30) and a Screwdriver (29), fix the Lock (33).
Then install the Baking tray (5). See Pic. 6.
Pic. 18
To prevent the drawer from falling out, screw it together with
the Under-the-drawer plank (23) with the help of a Nut (24),
screws (32) and both 4 mm hex keys (27). See Pic. 18
To be used indoors, for its intended purpose only and
under the direct supervision of an adult! All the
responsibility for children’s injuries received during games
on the furniture lies on adults watching after them.
Always be vigilant during children's games!
Pic. 17
Screw together 2 assembled structures with Confirmat screws (25) and
insert a drawer. See Pic. 17