MOON Equinox SE CD Player
Front Panel Controls (continued)
To load a compact disc into the Equinox
SE
, press /S, put the CD in the drawer with the label side facing up and press
/Sagain to close the drawer. When a CD is first loaded into the Equinox
SE
, the total number of tracks, and total playing
time will appear in the display. In the event that you load a CD that contains no musical tracks (i.e. data only), the word
‘DATA’ will appear in the large digital display window and the drawer will automatically open to eject this unplayable CD.
Press X/to begin playing a compact disc. Pressing X/while a disc is already playing results in the current track being
paused; Press X/again to resume playing the disc.
Press to search backward or to search forward through the compact disc’s tracks. When you’ve located the track
number, press X/to begin playing that track. In the event that you initiate a forward or backward track change while a
disc is already playing, it will automatically start playing the track you select; you need not press X/.
Press and hold to scan backward or to scan forward through the track currently playing.
Press /Sto stop the compact disc from playing. The laser will return to the start position of the disc. To open the drawer
and remove the compact disc, press /Sagain.
If you want to turn the display off, press and hold the “Display” button for 2 seconds. When the display is off, it will still come
back on for a short period of time whenever you press any of the buttons located on the front panel or the remote control;
when you are done, the display will automatically turn off again. To turn the display back on again, press the “Display” button
again. The sonic performance of the MOON Equinox
SE
CD Player may improve slightly when the display is turned off.
The “Prog” button allows you to program a selection of tracks in the order that you wish to listen them. After loading a
compact disc into the Equinox
SE
, select the first track you wish to listen to, using the or buttons and then press
“Prog”. To program a second track, select it the same way you did for the first one and press “Prog” again. Repeat this
operation as many times as you want to program tracks. Once you’ve completed programming your track selection(s), the
digital display window will show the number of tracks that have been programmed and their total time. To begin playing your
programmed selections, simply press the Xbutton. Pressing will only suspend the playing of the programmed selection.
Pressing a second time will clear your program selection from the Equinox
SE
’s memory. As well, opening the drawer at
any time will also clear your program.
The “Scan” button (Remote control operation ONLY) forces the Equinox
SE
to play the first ten (10) seconds of each track
on the compact disc currently loaded into the player. When a track is playing in “scan” mode, you can press the Xbutton to
continue listening to the remainder of the current track; doing this automatically terminates the “Scan” mode.
The “Repeat” button (Remote control operation ONLY) performs three (3) functions: Pressing “Repeat” once will result in the
entire disc being played again once it has reached the end of the final track. Pressing “Repeat” a second time will result in the
track currently playing being repeated again once it has ended. To cancel this mode, simply press the “Repeat” button a third
time.
If you have created a program of selected tracks, pressing “Repeat” once will result in your entire program repeating itself
once it has completed its cycle; Pressing “Repeat” a second time will result in the current track from your program being
played again once it has ended; Pressing “Repeat” a third time will terminate the “Repeat” mode.
____________________________________________________________________________________
FrontPanelControls 8
