Morbella AirPump AX1 User manual

1
© 2021 Maka Technologies Group. All Rights Reserved.
Trademarks
All brand and product names are trademarks or registered trademarks of Maka Technologies Group. In
association with Maka GPS Technologies Pte. Ltd. (UEN 200710247W), Maka GPS Technologies (KL) Sdn. Bhd.
(1079262-H)
The information in this manual is subject to change without notice.
www . makagps . c o m 5 / 2021 . R 1.1
Ensure battery is fully discharge prior to the first charging to maximise your battery life.
USER MANUAL

2
© 2021 Maka Technologies Group. All Rights Reserved.
Safety information
To prevent injury to yourself and others or damage to your device, read the safety information about your device before
using the device.
Warning
Failure to comply with safety warnings and regulations can cause serious injury or death.
Do not use damaged power cords or plugs, or loose electrical sockets
Unsecured connections can cause electric shock or fire.
Do not touch the car charger with wet hands or disconnect the charger by pulling the cord
Doing so may result in electrocution.
Do not bend or damage the car charger
Doing so may cause electric shock or fire.
Do not use your device while it is charging or touch your device with wet hands
Doing so may cause electric shock.
Do not short-circuit the charger or the device
Doing so may cause electric shock or fire, or the battery may malfunction or explode.
Use manufacturer-approved batteries, chargers, accessories, and supplies
•Using generic batteries or chargers may shorten the life of your device or cause the device to malfunction. They may
also cause a fire or cause the battery to explode.
•Use only Maka Technologies Group-approved battery and charger specifically designed for your device. Incompatible
battery and charger can cause serious injuries or damage to your device.
•Maka Technologies Group cannot be responsible for the user’s safety when using accessories or supplies that are not
approved by Maka Technologies Group.
Do not drop or cause an impact to the charger or the device.
Handle and dispose of the device and charger with care
•Never dispose of the battery or device in a fire. Never place the battery or device on or in heating devices, such as
microwave ovens, stoves, or radiators. The device may explode when overheated. Follow all local regulations when
disposing of used battery or device.
•Never crush or puncture the device.
•Avoid exposing the device to high external pressure, which can lead to an internal short circuit and overheating.
Protect the device, battery and charger from damage
•Avoid exposing your device and battery to very cold or very hot temperatures.
•Extreme temperatures can damage the device and reduce the charging capacity and life of your device and battery.
•Never use a damaged charger or battery.
Do not bite or suck the device or the battery
•Doing so may damage the device or result in an explosion or fire. • Children or animals can choke on small parts.
•If children use the device, make sure that they use the device properly.
Do not handle a damaged or leaking Lithium Ion (Li-Ion) battery
For safe disposal of your Li-Ion battery, contact your nearest authorised service centre

3
© 2021 Maka Technologies Group. All Rights Reserved.
Caution
Failure to comply with safety cautions and regulations can cause injury or property damage
Do not expose the device to heavy smoke or fumes
Doing so may damage the outside of the device or cause it to malfunction.
If you notice strange smells or sounds coming from your device or the battery, or if you see smoke or liquids
leaking from the device or battery, stop using the device immediately and take it to a Maka Service Centre
Failure to do so may result in fire or explosion.
Do not store your device in very hot or very cold areas. It is recommended to use your device at temperatures from
0 °C to 60 °C and humidity from 10% to 80%
Doing so may cause the screen to malfunction, result in damage to the device, or cause the battery to explode.
Do not use your device or applications for a while if the device is overheated
Prolonged exposure of your skin to an overheated device may cause low temperature burn symptoms, such as red spots
and pigmentation.
Do not drop your device or cause impacts to your device
•Your device may be damaged or may malfunction.
•If bent or deformed, your device may be damaged or parts may malfunction.
Ensure maximum battery and charger life
•Avoid charging your device for more than a week, as overcharging may shorten battery life.
•Over time, unused device will discharge and must be recharged before use. Charge or used the device every 3 months
for best maximum battery life.
•Disconnect the charger from power sources when not in use.
•Leaving batteries unused over time may reduce their lifespan and performance. It may also cause the batteries to
malfunction or explode, or cause a fire.
•Your device may wear out over time. Some parts and repairs are covered by the warranty within the validity period, but
damages or deterioration caused by using unapproved accessories are not.
Do not disassemble, modify, or repair your device
•Any changes or modifications to your device can void your manufacturer’s warranty. If your device needs servicing, take
your device to a Maka Service Centre.
•Do not disassemble or puncture the battery, as this can cause explosion or fire.
•Turn off the device before removing the battery. If you remove the battery with the device turned on, it may cause the
device to malfunction.
When cleaning your device, mind the following
•Wipe your device or charger with a towel or an eraser.
•Do not use chemicals or detergents. Doing so may discolour or corrode the outside the device or may result in electric
shock or fire.
Do not distribute copyright-protected material
Do not distribute copyright-protected material without the permission of the content owners. Doing this may violate copyright
laws. The manufacturer is not liable for any legal issues caused by the user’s illegal use of copyrighted material.

4
© 2021 Maka Technologies Group. All Rights Reserved.
Correct disposal of this product
(Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger,
headset, USB cable) should not be disposed of with other household waste.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these
items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government office, for
details of where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and
its electronic accessories should not be mixed with other commercial wastes for disposal.

5
© 2021 Maka Technologies Group. All Rights Reserved.
Disclaimer
Some content and services accessible through this device belong to third parties and are protected by copyright, patent
trademark and/or other intellectual property laws. Such content and services are provided solely for your personal non-
commercial use.
You may not use any content or services in a manner that has not been authorised by the content owner or service provider.
Without limiting the foregoing, unless expressly authorised by the applicable content owner or service provider, you may not
modify, copy, republish, upload, post, transmit, translate, sell, create derivative works, exploit, or distribute in any manner or
medium any content or services displayed through this device.
“THIRD PARTY CONTENT AND SERVICES ARE PROVIDED “AS IS.” MAKA TECHNOLOGIES GROUP DOES NOT WARRANT
CONTENT OR SERVICES SO PROVIDED, EITHER EXPRESSLY OR IMPLIEDLY, FOR ANY PURPOSE. MAKA EXPRESSLY
DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. MAKA TECHNOLOGIES GROUP DOES NOT GUARANTEE THE ACCURACY, VALIDITY,
TIMELINESS, LEGALITY, OR COMPLETENESS OF ANY CONTENT OR SERVICE MADE AVAILABLE THROUGH THIS DEVICE AND
UNDER NO CIRCUMSTANCES, INCLUDING NEGLIGENCE, SHALL MAKA TECHNOLOGIES GROUP BE LIABLE, WHETHER IN
CONTRACT OR TORT, FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, ATTORNEY FEES,
EXPENSES, OR ANY OTHER DAMAGES ARISING OUT OF, OR IN CONNECTION WITH, ANY INFORMATION CONTAINED IN, OR
AS A RESULT OF THE USE OF ANY CONTENT OR SERVICE BY YOU OR ANY THIRD PARTY, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.”
Third party services may be terminated or interrupted at any time, and Maka Technologies Group makes no representation
or warranty that any content or service will remain available for any period of time. Content and services are transmitted by
third parties by means of networks and transmission facilities over which Maka Technologies Group has no control. Without
limiting the generality of this disclaimer, Maka Technologies Group expressly disclaims any responsibility or liability for any
i n t e r r u p t i o n o r s u s p e n s i o n o f a n y c o n t e n t o r s e r v i c e m a d e a v a i l a b l e t h r o u g h
this device.
Maka Technologies Group is neither responsible nor liable for customer service related to the content and services. Any
question or request for service relating to the content or services should be made directly to the respective
content and service providers.

6
© 2021 Maka Technologies Group. All Rights Reserved.
About this manual
This device provides high quality digital recording device using Maka’s high standards and technological expertise. This
user manual is specially designed to detail the device’s functions and features.
•Please read this manual before using the device to ensure safe and proper use. Descriptions are based on the
device’s default settings.
•Images and screenshots may differ in appearance from the actual product.
•Content may differ from the final product, or from software provided by service providers and is subject to change
without prior notice.
•For the latest version of the manual, refer to the Maka website at www.makagps.com.
•Available features and additional services may vary by device, software.
•Applications and their functions may vary by country, region, or hardware specifications.
•Maka is not liable for performance issues caused by applications from any provider other than Maka.
•Maka is not liable for performance issues or incompatibilities caused by not installing the device as stated in this
manual. Attempting to customise the installation may cause the device or applications to work improperly. This may
result in device malfunctions and data corruption or loss. These actions are violations of your Maka agreement and will
void your warranty.
•Default applications that come with the device are subject to updates and may no longer be supported without prior
notice. If you have questions about an application provided with the device, contact Maka Service Centre.

7
© 2021 Maka Technologies Group. All Rights Reserved.
Table of Contents
Product Specifications 08
Getting Started
Overview of your Marbella AirPump AX1
Marbella AirPump AX1 Layout 09
Standard Packaging of Marbella AirPump AX1
Package Contents 10
Operation of your Marbella AirPump AX1
AirPump Switch Mode 11
AirPump operation on -
-Vehicle / Motorcycle / Bicycle / Ball 11
Charging your Marbella AirPump AX1
Charging your AirPump 12
Operating the Marbella AirPump AX1 LED Torch Light
Turning on your Torch Light 13
FAQ on Marbella AirPump AX1 20

8
© 2021 Maka Technologies Group. All Rights Reserved.
Product Specifications
1) Reverse polarity connection: Solid Red LED with fast 2 short beep.
Dimension
(L)152mm x (W)104mm x (H)46mm
Weight
575grams
Capacity
5000mAh
Inflation Pressure
<3.5 Bar
Noise
<85 dB
Input
5V/1.5A
Power
80W
Full Charge Time
2 - 3 Hours
Operating Temperature
0°C ~ 35°C
Battery Type
Lithium Polymer

9
© 2021 Maka Technologies Group. All Rights Reserved.
Getting Started
Overview of your Marbella AirPump AX1
Figure 1: Marbella AirPump AX1
Table 1: Keys of Marbella AirPump AX1
Key
Function
1, Power Switch
Switch to turn the device on/off and start/stop
2. Pressure +Switch
Switch to increase the pressure of the pump
3. Type-C Input
Charging input using Type-C cable
4. LED Light
Torchlight
5. Screen Display
Display consists of mode of usage/battery capacity/Pressure display/Pressure Mode
6. Pressure -Switch
Switch to decrease pressure of the pump
7. LED Light Switch
Torchlight on/off switch
8. Function Switch
Switch to change mode of usage/mode of pressure type
9. Inflatable Nozzle Air Tube
Air tube to use for vehicle / motorcycle

10
© 2021 Maka Technologies Group. All Rights Reserved.
Getting Started
Standard Packaging of your Marbella AirPump AX1
Package contents
Check the product box for the following items:
•AirPump Device with inflator tube (for car and motorcycle)
•Inflatable Nozzle Switcher (for other inflatable product)
•Inflatable Needle (for inflatable balls)
•Type-C USB charging cable
•French Inflatable Nozzle (for bicycle)
•Operating Manual
The items supplied with the device and any available accessories may vary depending on the region. The supplied items are
designed only for this device and may not be compatible with other devices.
Appearances and specifications are subject to change without prior notice. Malfunctions caused by using unapproved
accessories are not covered by the warranty service. Availability of all accessories is subject to change depending entirely
on manufacturing companies. For more information about available accessories, refer to the Maka Technologies Group
website

11
© 2021 Maka Technologies Group. All Rights Reserved.
Getting Started
Operation of your Marbella AirPump AX1
Switch Mode
This function is to let you change the mode of pump require to use on which type of item.
1. Turn on Marbella air pump AX1 –Press and hold for 2 second on button to turn on device.
2. Press on mode button (Refer figure 1) twice to change the mode. Continue to press the same button
to switch mode till you wish to set it on. Refer to figure 2 below
3. Press and hold on mode button for 2 second and pressure mode will start blinking. Press again on the
button to switch mode (PSI/BAR/KPA/Kg/cm²). Refer to figure 3 below
4. Once mode is set, the blinking mode will stop and next step is to set the pressure capacity (refer to
Operation for instruction)
Noted : The air pump will shut down automatically if there is no operation within 60 seconds
after it is started. You can use LED light no matter whether the product is on / off.
Operation (Vehicle/Motorcycle/Bicycle/Ball)
This operation will let you know how to select the right type of mode and setting of the pressure in-order to have
a better and correct usage.
1. Turn on Marbella air pump AX1 –Press and hold for 2 second on button to turn on device.
2. Set mode type of mode (refer to Switch Mode on setting) based on what you will use the device for –
Car / Motorcycle / Bicycle or Ball.
3. Set the pressure by pressing on (+) or (-) switch once. Blinking led number will appear and press (+) or
(-) to set to the right pressure. Blinking led number stop and back to main led display (0.00) after 2sec
when no operation detected.
4. Attach the inflation to the tire (For car and motorcycle –tube is origin attach to pump) or item (ball or
other inflatable item –Require to attach a nozzle provided to the origin tube).
5. Pressure indicator will show the pressure of the tire or item pressure when connected. Press the on/off
switch to start. For inflatable item you may require to start and stop manually if pressure is unavailable.
6. Once pressure reach the pressure point set, pump will stop operate. Remove the inflator accordingly
from the tire or item. Proceed to the next and goes on.
(Noted : Do know the pressure mode and what capacity of the air needed to pump before setting
the type of mode as device will be shut down in 60sec when no operation detected)

12
© 2021 Maka Technologies Group. All Rights Reserved.
Getting Started
Charging your Marbella AirPump AX1
Charging
There are 4 charging bar when the pump is charged. Charging will require to take appx 2-3hrs for full
charged when fully depleted.
•You may use the Type-C USB data cable that comes with standard packaging or cable that comes with your
phones to charge.
•Attach the USB connector to input (5V/1.5A) port when pump is in off mode. Battery indicator bar will start to
blink accordingly to battery is charged.
•When fully charged, you will see 4 white bar not blinking.
Noted : When device is battery is below 5% , you will see blinking bar and screen will show “LO”
flashing.
Charging time may be vary using the usb adaptor
(Recommended to charge / use the pump once every 3 month for best maximum battery life)

13
© 2021 Maka Technologies Group. All Rights Reserved.
Getting Started
Operating the Marbella AirPump AX1 LED Torch Light
Turning on your Torch Light
There amodes of LED Torch Light is to light up during dark time and help you see easier during using of the
pump or finding something using the torchlight without using the pump
1. Press on the once to turn on/off the torchlight. Refer to layout below

14
© 2021 Maka Technologies Group. All Rights Reserved.
Getting Started
FAQ on Marbella AirPump AX1
How long does Marbella AirPump take to be fully charged?
It will take approximately 2 to 3 hours to be fully charged.
How long does Marbella AirPump battery last in storage?
The battery can last up to 6 ~ 9 months. However, it is recommended to recharge or use once every 3 months to achieve
the desired results and maximum battery life.
How many times can Marbella AirPump AX1 pump a tire?
Device does not have a actual time how many it can operated. Always check the battery capacity before using the device to
pump a tire or item.
How do I switch off the Marbella AirPump AX1?
You can turn off the Power Switch once charging is completed or when not in use. Device will also shut down once it not in
operation for 60sec.

15
© 2021 Maka Technologies Group. All Rights Reserved.
Copyright
Copyright © 2021 Maka Technologies Group and its subsidiaries. All rights reserved. Marbella is a trademark of Maka
Technologies Group including in one and more countries. All trademarks mentioned belong to their owners, third party
brands, product names, trade names, corporate names. And company names mentioned may be trademarks of their
respective owners or registered trademarks of other companies and are used for purpose of explanation and to owner’s
benefit, without implying a violation of copyright law.
This manual is protected under international copyright laws.
No part of this manual may be reproduced, distributed, translated, or transmitted in any form or by any means, electronic or
mechanical, including photocopying, recording, or storing in any information storage and retrieval system, without the prior
written permission of Maka Technologies Group.