motif MT01004US User manual

Item# MT01004US
HOUSEHOLD USE ONLY
Technical Data:
Rated voltage: AC 120 V, 60 Hz
Rated power input: 1525 W
MotifCoffee.com
• Superior Water
Heater
ensures ideal
brewing temperature
• Pre-Infusion Mode
releases the unique flavors
of your coffee
• Advanced
Decalcification
Sensor
• Programmable
Timer
• Separate Warming
Plate Heater prevents
overheating
2-year limited warranty
Elements
Pour-Over Style
Coffee Brewer
Part # 56020-01

2
IMPORTANT SAFEGUARDS
This appliance is for household use only. When using electrical appliances,
basic safety precautions should always be followed to avoid fires, electric
shocks, burns, or other injuries and damage. Read these operating and
safety instructions carefully. Call our toll-free customer service number for
information on examination, repair, and adjustments; do not attempt to repair
the appliance yourself.
Read all instructions.
• Do not touch hot surfaces - use the handles or knobs.
• Do not immerse cord, plugs or the appliance in water or other liquids.
• Unplug from outlet when not in use and before cleaning. Allow to cool before
putting on or taking off parts, and before cleaning the appliance.
• If children are present while the appliance is in use, keep them a safe
distance away.
• Do not operate the appliance if its cord, plug, or various parts have
been damaged.
• The use of accessory attachments is not recommended by the appliance
manufacturer and may result in fire, electrical shock or personal injury.
• Do not use outdoors or in damp areas.
• Do not let the cord hang over the edge of a table or counter.
• Do not place appliance on or near a hot electric or gas burner,
or in a heated oven.
• To disconnect the appliance, first turn the power switch off, then remove
plug from the wall outlet.
• Do not use this appliance for anything other than its intended use.
• Place the appliance on a flat level surface.
• Do not attempt to operate the appliance without putting water in the tank.
Only fresh, cold water should be used in the tank. Do not use hot water.
• Never remove the carafe or filter basket during brewing cycle.
• Do not use a carafe with a loose or damaged handle.

3
• Never lay the thermal carafe on its side when it is full, even if the lid is
firmly attached.
• Do not clean carafe with abrasive cleansers, steel wool pads, or other
abrasive material.
• Do not remove the bottom cover from the appliance. There are no user-
serviceable parts inside.
• The carafe is designed for use with this appliance. It must never be used
on a range top.
• Make sure that the voltage in your home corresponds with the voltage
indicated on the bottom of the appliance.
• Do not attempt to operate the appliance if it only works intermittently,
or stops working altogether.
SAVE THESE INSTRUCTIONS!
EXTENSION CORDS
A short power-supply cord is provided to reduce the risk of tangling and tripping.
Longer detachable power-supply cords or extension cords are available and may
be used if care is exercised. If a detachable power-supply cord or extension cord
is used:
• The electrical rating of the extension cord should be appropriate for the electrical
rating of the appliance.
• The longer cord should be arranged so that it will not drape over the counter
top or tabletop where it can be tripped over, snagged, or pulled on, especially
if children are present.
POLARIZED PLUG
This appliance has a polarized plug, which means that one blade is wider than the
other. To reduce the risk of electric shock, this plug is designed to fit into a polarized
outlet only one way. If plug does not fully fit into the outlet, reverse it. If it still does
not fit, contact a qualified electrician. Do not attempt to modify the plug.

4
1. Water tank lid
2. Water tank
3. Filter basket
4. Display
5. H(hours) button
6. M(minutes) button
7. TIMER SET button
8. ON/OFF switch, auto
shut off 90 minutes
after brew cycle
begins (Green LED)
9. ON/OFF switch
with Pre-Soak
(Pre-Infusion),
auto shut off
90 minutes after
brew cycle begins
(Blue LED)
10. Clean button
(Decalcification)
(Red LED)
11. Non-stick warming
plate
12. Carafe lid
13. Glass Carafe
Technical Data
Rated voltage:
AC 120 V, 60 Hz
Rated power input:
1525 W
1
6
7
8
2
3
4
5
9
10
13
12
11

5
Thank you
Thank you for selecting the Motif Elements Pour-Over Style
Coffee Brewer. It has been designed to help you elevate your
home experience. PLEASE READ ALL OUR INSTRUCTIONS to
assure operational excellence.
Limited warranty:
2 year limited warranty from the date of original purchase.
1. This warranty extends only to the original retail purchaser or gift recipient.
Keep the original sales receipt, as proof of purchase is required to make
a warranty claim.
2. Defects that occur due to improper connection, improper handling
or repair attempts by non-authorized persons are not covered by
the warranty. The same applies for failure to comply with the use
of consumables (e.g. cleaning and decalcifying agents) that do not
correspond to the original specifications.
3. This device was designed and built for household use only. It is not
suited for other uses.
4. Warranty does not cover damages that are not the responsibility of the
manufacturer. This is valid especially for claims arising from improper
use (e.g. operation with insufficient current or improper voltage).
Please call 800-782-6671 for warranty claims.

6
Operations:
Before your first use:
1. Remove packaging materials, labels, and stickers from the coffee brewer.
2. Wash filter basket and glass carafe with a mild dish detergent.
3. Read the BREWING INSTRUCTIONS section.
4. Clean the brewer by filling the water reservoir with fresh, filtered, cold
water to the MAX line.
5.Set 24 hour clock to correct time by pressing the H (hour) and
M (minute) buttons.
6.Turn on the brewer and allow the water to run through a brew cycle.
7. Let the brewer cool down for 5 minutes before repeating the process at
least 2 more times before brewing coffee.

7
Brewing Instructions:
1. Swivel filter basket to right and remove it from the holder.
2. Remove the detachable water reservoir by holding the recessed grip
and pulling straight up.
3. Remove the water reservoir lid and fill with the required volume of
fresh, filtered, cold water to the desired batch size. Do not fill above the
MAX line. (Fig.1)
4. Close the water reservoir by replacing the lid and insert it back into the
appliance. Please ensure that you replace the reservoir upright into the
appliance. The guide rails on the appliance (left of the reservoir) will
help you with this.
5. Fold over the seamed edges of a # 4 paper filter and place in the filter
basket. Scoop the ground coffee into the paper filter. (Fig.2)
6. Put the filter basket back into its holder. First hang the eyelet of the filter
on top of the swivel arm. Next, press the round base into the clip. An
audible click tells you it is inserted properly.
7. Swivel the filter back to the left to lock in place. Place the glass carafe
with closed lid onto warming plate. (Fig.3)
8. Set 24 hour clock to correct time by pressing H(hour) and
M(minute) buttons.
9. Press the ON/OFF button. The ON/Off button will illuminate in green
indicating the machine is operating. (Fig.4)
10. When the audible alarm sounds the brew process is complete.
Sometimes the filter basket may need a few more seconds to fully drain
before removing carafe.
11. The warming plate will remain on for 90 minutes.

8
Optional Pre-Soak (Pre-Infusion):
When using freshly roasted coffee (30-40 days old)
Pre-infusion mode helps eliminate any remaining CO2
gasses that can affect taste.
1. Press pre-soak ON/OFF button.
2. The pre-soak ON/OFF button will illuminate in blue, indicating the
pre-soak mode is operating.
3. When the audible alarm sounds the brew process is complete.
Sometimes the filter basket may need a few more seconds to fully drain.
4. Remove the carafe from the brewer and enjoy! The warming plate will
remain on for 90 minutes.
Convenient Timer Feature:
This allows you to set a time at which brewing will
automatically begin.
1. Prepare the appliance as described in Brewing Instructions but without
pressing the ON/OFF button.
2. To set the desired start time hold down the TIMER SET button and press
the H and M buttons repeatedly to set the desired start time. The first
time you program it, the display will show 00:00.
3. After letting go of the TIMER button, the current time will show after two
seconds. The chosen start time is saved until you set a different time or
remove the appliance from the power source.
4. By briefly pressing the TIMER SET button again, the timer feature is
activated for the next brewing process.
5.To show this, the TIMER SET illuminates in white.
6.By pressing the TIMER SET button again, the timer feature can be
deactivated at any time. The white LED goes off.
7. To brew coffee before the programmed start time press the ON/OFF
button. This will deactivate the timer.

9
Descaling:
In hard water areas, scaling from limestone content in the
water may build up in your brewer. Scaling can lead to
extended preparation time and possible damage to your
Motif Elements coffee brewer.
We recommend using a good quality biodegradable and
phosphate-free coffee machine descaler when your brewer’s
CLEAN button illuminates.
TO DESCALE:
The CLEAN button will illuminate in red when descaling is
recommended.
1. Fill the water reservoir according to the descaler manufacturer’s
instructions.
2. Press the CLEAN button. The light will illuminate in red and begin
flashing.
3. The descaling process is finished when all descaler water is
brewed out.
4. When the reservoir is emptied and the descaling process is
complete, the red light will turn off.
5.Following the completed descaling process, brew two more times
with fresh, clean water.
Note: If you live in an area with above average limestone content, you
may have to descale more frequently. Indications that descaling is needed
include unusual noises or longer than normal brew times.

10
Brew Your Best™Coffee Tips:
At Motif, we’re committed to designing brewing equipment
that brings out the best in coffee, while providing you with the
educational insight to create a memorable coffee experience
every day.
From the decades of experience we’ve gathered in the Specialty Coffee
Community, combined with learnings from some of our important partners
like the Specialty Coffee Association (www.sca.coffee), we’ve identified a
few key best practices and elements to focus on.
Here are some key variables and a few best practices that we’ve
determined for brewing amazing coffee with your Elements coffee brewer.
Coffee and Water Amount/Weight
The most important thing to remember here is to brew to your preferences.
We all have unique taste, and we encourage you to embrace and enjoy
your coffee exactly the way you like. If you always use the same ratio of
water to coffee grounds, the flavor of your coffee will be more consistent.
Of course, you can explore with more or less coffee, but it’s always good
to start with a base recipe. If available, using a scale to weigh your coffee is
the best way to stay consistent.
We also recommend brewing in 6 or 8 cup batches.
Here is what we recommend for the ELEMENTS brewer you’ve
purchased:
Batch Size Water Volume Coffee Weight Coffee Scoops (ground)
6-Cup batch 1000ml 55 grams 12 tbsp.
8-Cup batch 1300ml 65 grams 16 tbsp.