motortronics VMX-agility VMX-AGY-031 User manual

MOTORTRONICS
TM
Solid State AC Motor Control
SIZE 2: FAN KIT INSTALLATION GUIDE
VMX-agility
TM

VMX-agility™ - Size 2 Fan Kit Installation Guide 1 | P a g e
Fan Kit Installation Guide (Size 2)
Phasetronics Inc. dba Motortronics
1600 Sunshine Drive
Clearwater, Florida 33765
www.motortronics.com
© 2019 by Phasetronics, all rights reserved
Copyright subsists in all Phasetronics Inc. deliverables including magnetic, optical and/or any other soft
copy of these deliverables. This document may not be reproduced, in full or in part, without written
permission. Enquiries about copyright of Phasetronics Inc. deliverables should be made to Phasetronics
Inc. Ltd. If, by permission of the copyright owner, any part of this document is quoted, then a statement
specifying the original document shall be added to the quotation. Any such quotation shall be according
to the original (text, figure or table) and may not be shortened or modified.

VMX-agility™ - Size 2 Fan Kit Installation Guide 2 | P a g e
Fan (VMX-AGY-031)
VMX-AGY-031 is designed for models VMX-AGY-201 to VMX-AGY-209. It increases the number of start/stop cycles
per hour (see table below). The fan operates automatically during a soft start or soft stop and will continue to run if
the heatsink temperature is > 113 oF (45oC). The fan stops when the heatsink temperature has fallen below 104 oF
(40oC).
Fitting
California Customers:
California Proposition 65 Warning
WARNING: this product and associated accessories may contain chemicals known to the State of California to cause cancer, birth
defects, or other reproductive harm. For more information visit https://p65warnings.ca.gov
Agility model
Maximum duty cycle F-S with optional fan fitted
VMX-AGY-201 / VMX-AGY-203
90-40 (40 cycles per hour)
VMX-AGY-205
90-30 (30 cycles per hour)
VMX-AGY-207
90-20 (20 cycles per hour)
VMX-AGY-209
90-10 (10 cycles per hour)
Step 2. Loosen the two lower mounting screws (2a) and
slide the fan assembly downward between the mounting
bracket and the heatsink fins (2b)
Step 1. Position the assembly at the top on the
VMX-agility unit
Step 4. Remove the blanking plug and insert the flying lead
from the fan assembly into the socket as indicated below.
2a
Step 3. When the fan assembly is fully inserted and the
lower plate of the assembly has engaged with the lower
mounting screws, re-tighten the mounting screws fully.
2b

MOTORTRONICS
TM
Solid State AC Motor Control
VMX-AGY-FKIG2 - 08/27/19
SIZE 2: FAN KIT INSTALLATION GUIDE
Phasetronics, Inc. dba Motortronics
1600 Sunshine Drive
Clearwater, Florida 33765
USA
Tel: [phone] or 888.767.7792
Fax: [phone] or 800.548.4104
wwwww.motortronics.com
VMX-agility
TM