Movesafe MS-515SDV User manual

MS-515SDV USER MANUAL
Preface
Thank you for purchasing the Full HD Sport Camera, 1080P HD Digital waterproof ideo
camera. This product is quite small and delicate with wonderful waterproof humanity design.
With a multipurpose damp, it can help you achie e omni-directional ideo / monitoring under
all kinds of outdoor conditions.
This manual contains important safety and operating information. Please read all the
information carefully before you use the de ice to a oid accidents and keep it for future
reference.
Product Overview
As an underwater acti ity fan, are you always impressed by the beautiful scene in the sea or
lakes, or are you still looking for a companion that can help you record your unforgettable
experiences?
Try the Full HD Sport Camera, it is ideal for outdoor and underwater pursuits. Water-proof
feature makes it possible to take photos and record ideos under water up to 20 meters. With
HD lens and low light le el sensiti ity, you will ne er miss any opportunity of taking beautiful
underwater shots again.
Product Features
> Waterproof up to 20 meters, ideal for outdoor and underwater pursuits
> 1/ 2.5 5 MP COMS sensor
> 120° wide-angle, HD camera lens, let you shoot more freely.
> Ad anced ibration effect, makes mode transfer more con enient, easier to operate
> Optional ideo resolutions:
A、720P60: 1280*720P 60fps H.264 AVI
B、720P30: 1280*720P 30fps H.264 AVI
C、FULL HD30: 1920*1080P 30pfs H.264 AVI
D、1080P30: 1440*1080P 30fps H.264 AVI
> 12MP photo resolution, JPG format
> Built-in high capacity Li-battery lasting ideo recording for 2.5 h
> Support HDMI and TV-out, easy to share more funs
> Unique loop recording and audio recording function
> Laser light help for fixing position of the target object
> 2 high brightness LED lights for night using
> Flashlight function lasting working up to 10h
> Support MicroSD card up to 32 GB (CLASS 4 or abo e is recommended)
> USB2.0 Upnp
> Support PC charging

Product Structures
Respecti ely is: 1. power / mode / up button 2. Charging LED light(yellow) 3.
Recording/playing/execute button 4. Led indicator/down button 5. LED indicator (red &
blue&purple) 6. USB/AV-OUT/charging port 7. HDMI port 8. MicroSD card slot 9.
Waterproof co er/Waterproof ring 10.Microphone hole 11. Laser light 12. LED lights 13.
Camera lens 14. Base bracket 15. Mounting bracket 16. Combination reset button(press
power and light button together)
Installation (With Pictures)
Full HD Sport Camera can be used handheld or can be used combined with clips and bracket,
as below picture shows:
1. Remo e the back co er: Rotate the back o er simultaneously to push back outside, and
then you can remo e the back co er.
2. Installation of mounting bracket

Packaging & Accessories
Standard Accessories:
User manual, USB cable, Adaptor, Bag, AV cable, HDMI cable, Mounting Bracket
Optional accessories:
In iew of different usage purpose, such as motorbike, airplanes, golf carts, ehicle, bicycles
and many other round and square rail applications, we also offer the optional accessories to
users to meet their different demands.
>01 Mount bracket >02 Suction cup mount >03 Base bracket >04 Adhesi e base(with
1pc 3M sticker) >05 Upright bracket >06 90°bracket >07 Hexagonal plastic nut >08
Anise plastic nut >09 Silicon strap 15cm >10 Silicon strap 35cm >11 Silicon strap 70cm

Option 1 Multi-functional sport bracket
Option 2 Sucker
MicroSD Card

Function specification
. Starting up
> Insert microSD card, press power button“ ” for 2 seconds. Purple LED indicator is lit up
with ibration. Unit enters into initialized state, please wait for a moment until the unit
ibrates again, purple LED indicator changed to blue, this means the unit enters into standby
mode.
> It may take a few seconds to enter into initialized state depending on capacity and load data
quantity of microSD card.
> For ideo resolution is HD 1080P, please use at least a brand high-speed (CLASS 4 or
abo e) microSD card to achie e better and more fluent ideo quality.
> In order to make the camera and TF card reach good compatibility, we suggest you to format
microSD card by TV setting when you use it first time because it won’t reach good
compatibility if format microSD card by PC. After format microSD card by TV setting, it can
a oid some situations, such as purple indicator flashes quickly warning or camera
automatically stops, etc
Notes: The purple indicator flashes quickly and unit will be fast rhythm ibration when turned
on without microSD card. Please turn off unit and insert microSD card again.(PDF 文档上没有
了)
2. Mode transfer
In the condition of not connecting to AV&HDMI cable, the unit would automatically enter into
mode 1 after it turns on. Short press mode botton“ ”, unit will circle in below 3 modes:
Mode1: Video recording standby mode, blue indicator will be constantly on.
Mode2: Photo taking standby mode, red indicator will be constantly on.
Mode3: Audio recording standby mode, purple indicator will be constantly on.
When connect to the AV&HDMI cable, the unit would enter into the mode 1 directly after it
turns on. Short press mode botton“ ”, unit will circle in below 4 modes:
Mode1: Video recording standby mode, blue indicator will be constantly on.
Mode2: Photo taking standby mode, red indicator will be constantly on.
Mode3: Video and photo replaying mode, purple indicator is constantly on. (During this mode,
long press mode botton“ ” and unit enters into next mode)
Mode4: Audio replaying mode, purple indicator is constantly on. (During this mode, long press
mode botton“ ” and unit enters into next mode)
Notes:
1) The camera will ibrate once and mode indicator changes simultaneously after pressing
button, which means that operation is in effect, please don't press it again.
2) When operating mode button“ ”, unit ibrates twice, which means unit transfer from
audio recording mode into ideo recording standby mode. Thus you can realize unit
enters into ideo recording standby mode e en you couldn’t see indicator.
3) Unit can only enter into replaying mode after connecting AV&HDMI cable, otherwise this

mode will skip.
4) After connecting TV, there will be no audio recording mode.
5) During replaying mode, short press mode button“ ” is up operation and long press mode
button“ ” entering into next mode. Please refer to “TV-out function” part.
3. Video Recording
After unit turns on, short press execute button“ ”, the camera will ibrate once, and blue
indicator flashes slowly and unit begins to record ideo. Short press execute button“ ” again,
blue indicator flashes quickly for se eral seconds and unit ibrates once, then blue indicator
will be constantly on, that means ideo is stopped and sa ed.
Notes:
1) System setting ideo resolution is 1280*720P 60fps, that suits for outdoor extreme
sports ideo recording. We suggest you set up ideo resolution to 1280*720P 30fps to
achie e clearer and brighter photo quality when indoor light is dark.
2) When ideo resolution is 1280*720P 60fps, unit will automatic transfer into night mode if
unit records ideo in darker places to achie e brighter picture quality, and at the same
time, frame number will automatic transfer into 30fps.
3) When the loop recording function is off, the unit will automatically sa e a file after it fully
record a 4GB ideo fill and then start to record the new file.
4) Please remo e the waterproof co er in the backside of the unit for a better audio quality
when it not use underwater.
5) When microSD card is full (Loop recording function is off), battery used up or standby
mode for 3 minutes (time slot can be set up), unit will shut down automatically.
4. Loop recording function
> Through system parameter setting, loop recording function can be open, please refer to
“system parameter setting” chapter.
> After start the loop recording function, in the ideo state, the unit would automatically sa e
the ideo file according to the time setting in the system. The system time setting ha e
2mins, 5mins, 15mins, three state options.
5. Photo Taking
In the unit turning on state, short press mode button“ ” to photo-taking standby mode, red
indicator will be constantly on. Short press execute button“ ”, red indicator flashes quickly for
se eral seconds and unit ibrates one time, this means the photo taking is finished and sa e
the file successfully. And then the red indicator would be constantly on state.
Notes:
1) Red indicator will flash quickly during photo-taking, don’t shake the unit in case for a
better picture quality.
2) When microSD card is full, battery used up or standby mode for 3 minutes (time slot can
be set up), unit will shut down automatically.

6. Audio recording
When the unit in the sate of turning on, short press mode button“ ” to audio recording
standby mode. Short press execute button“ ”, unit will ibrate one time, and then the purple
indicator would flash slowly and unit begin to record audio. Short press execute button“ ”
again, unit ibrates again, that means the audio recording is finished and sa e the file
successfully, and then the purple indicator would be constantly on state.
Notes:
1) Please remo e the waterproof co er in the backside of the unit for a better audio quality
during audio recording.
2) When microSD card is full, battery used up or standby mode for 3 minutes(time slot can
be set up), unit will shut down automatically.
7. LED and Laser light
> Unit pro ides 2 high brightness LED lights and 1 laser light.
> In any turning on state (except TV-out playback mode), short press LED light button“ ” the
LED light and laser light will circle in below fi e modes:
Mode0: All light go out. (Unit would enter into this mode after turn on)
Mode1: The laser light would light up for 30 seconds for the purpose of positioning the object,
and then laser light will go out.
Mode 2: The LED lights are on for the purpose of ideo recording and strength the color quality
in the dark place condition.
Mode 3: The laser light is on for positioning in all the recording state.
Mode 4: The LED lights keep quickly flash in a high frequency to sa e flashlight energy.
Notes:
1) Each time the unit will ibrate after you successfully press the operation button.
2) In any mode, long press LED&laser light button“ ”, the unit will transfer to mode0 (all
lights go out).
3) The consequence of the mode circle is : mode 0->mode 1->mode 2->mode 3->mode
4->mode 0
8. Flashlight and laser positioning function
The unit has the single flashlight and laser positioning function. When this single function
works, the DV system would come to the state of turning off, it would help to get more longer
time for the usage. The way to operate as below details:
> Long press LED/laser light button“ ”, flashlight is lit up, short press LED&laser light
button“ ”, unit will circle in below 5 modes:
Mode 0: Torch state: Flashlight is lit up and can be working up to 10h.
Mode 1: The laser light is on for positioning purpose.
Mode 2: The LED lights keep quickly flash in a high frequency to sa e flashlight energy.
Mode 3: Laser light flashes slowly for intermittent laser positioning.
Mode 4: Turn off all LED lights.

Notes:
1) When in the single flashlight/laser positioning function, it is common condition if there is
no ibration after press buttons.
2) In any mode, long press LED&laser light button“ ” and unit will transfer to mode 4(all
lights go out).
3) The consequence of the mode circle is : mode 0->mode 1->mode 2->mode 3->mode
4->mode 0
9. Turn off and automatically turn off function
> In the standby mode, press power button“ ” around two seconds, purple indicator flashes
and unit ibrates 3 times, unit will turn off.
> When microSD card is full, battery used up or standby mode for 3 minutes (time slot can be
set up), unit will shut down automatically.
0. MicroSD card error warning and unit turn off automatically
The warning system would start in the condition of not inserting microSD card, microSD card
damaged and microSD card full recording, and at the same time the purple indicator flashes
quickly with the fast rhythm ibration. The unit would turn off automatically 15 seconds later.
. Low power warning and automatic shut down
During the system operation state, when built-in li-battery uses up, warning system will start.
Blue and red indicator alternate flash slowly and unit will be slow rhythm ibration, and then
turn off automatically 15 seconds later.
2. Downloading files and removable disk function
> Connect the unit to the computer USB slot.
> Press power button“ ” to turn on the unit, and a remo able disk will appear in "my
computer", you can iew the pictures or ideos, audio record files in the remo able disk, and
you can also copy these files to your computer.
> When connected to computer with USB1.1 port, please copy the ideos to your computer
desktop, and then replay it to a oid ragged playback.
Notes:
1) In this mode, you can short press LED/laser light button“ ” to turn on flashlight function,
unit can be used as a USB table lamp.
2) When connect to the USB, if the yellow indicator flash, it means the unit is in the state of
power charging.
3. Power Charging
> Plug the AC adaptor into socket, and then connect with the camera for battery charging. The
yellow indicator will be constantly on during charging. Indicator goes out after the battery is
full charged. The charging time is about 3 hours.
> Unit also could get power charging through USB cable, when you connect the unit to
computer, it would be start the power charging function. To a oid extending charging time,

please do not press the power button“ ” after you connect it to computer.
Notes:
When you connect to adaptor for charging in the status of units staring up, the unit would turn
off automatically if unit is in standby mode for 3 minutes(time slot can be set up), but it is still in
the charging status.
4. Shooting when charging
Put the AC adaptor into socket, and then connect with camera, long press power button“ ” to
turn on the unit. Se eral seconds later, purple indicator will be changed to blue, unit ibrates
one time, that means unit enters into the standby mode. And the yellow indicator will be
constantly on indicating it's in the charging status. And this time, you could operate any
function of the unit.
Notes:
Unit will turn off automatically if unit is in standby mode for 3 minutes (time slot can be set up),
but it is still in the charging status.
5．TV playback function
1) The unit has AV &HDMI two options for the audio and ideo output, you could choice any
one you like. Here we suggest to using the HDMI output for a better HD ideo quality.
A、Via AV cable, please connect AV cable to the camera’s USB&AV-OUT port, the yellow plug
connect with TV ideo input port(yellow), white plug connect with TV audio input port(white).
Please set up the signal input by refer to the TV user manual.
B、Via HDMI cable, please connect one plug of HDMI cable to the camera’s HDMI port,
another plug connect with TV HDMI port. Please set up the signal input by refer to the TV user
manual.
2) Turn on camera, you can see POWER LOGO and hear short warning tone, and then blue
indicator will be constantly on and unit enters into standby mode.
3) Videos playback: refer to “Mode transfer” chapter, short press mode button“ ” to ideos
playback mode, purple indicator will be constantly on. And then press up button“ ” or down
button“ ” for browsing. Short press enter button“ ” into playback interface and short press
enter button“ ” again to playback ideos. During playback, buttons function as following;
A、Short press enter button“ ”, pause or resume play.
B、Long press enter button“ ”, return to pre ious layer menu.
C、During ideo playing, long press down button“ ” or up button“ ” to achie e fast forward
or backward play ideos.
4) Pictures playback: refer to “Mode transfer” chapter, short press mode button“ ” to ideo
and pictures playback mode, purple indicator will be constantly on. And then press up
button“ ” or down button“ ” for browsing. Short press enter button“ ” into playback
interface and short press enter button“ ” again into pictures automatically play. During
playback, buttons function as following;
A、Short press enter button“ ”, pause or resume play.
B、Long press enter button“ ”, return to pre ious layer menu.

C、During pausing play, short press down button“ ” or up button“ ” to achie e upward or
downward play photos.
5) Audio playback: refer to “Mode transfer” chapter, short press mode button“ ” to audio
playback mode, purple indicator will be constantly on. And then press up button“ ” or down
button“ ” for browsing. Short press enter button“ ” into playback interface and short press
enter button“ ” again to playback audios. During playback, buttons function as following;
A、Short press enter button“ ”, pause or resume play.
B、Long press enter button“ ”, return to pre ious layer menu.
C、During audio playing, short press down button“ ” or up button“ ” to achie e fast forward
or backward play audios.
Notes:
1) If the capacity of ideo files is too big, it would be normal condition to wait some seconds
to play the ideo.
2) When the unit is in the ideo playing state, you could adjust the TV olume to get a better
audio quality.
3) During playing, HDMI cable is recommended to achie e better audio and ideo effect.
4) After connect with AV&HDMI cable and turn on, unit will enter into mode 1 automatically.
Press mode button“ ”, unit will circle in below 4 modes;
Mode 1: Standby mode of ideo recording, blue indicator will be constantly on.
Mode 2: Standby mode of photo taking, red indicator will be constantly on.
Mode 3: Video and picture taking playback mode, purple indicator will be constantly on.(In this
mode, press mode button“ ” into next mode.)
Mode 4: Audio playback mode, purple indicator will be constantly on.(In this mode, press mode
button“ ” into next mode.)
6. Shoot when connect to TV
Please refer to “TV playback function” chapter, well connect the AV or HDMI cable, you could
operate the TV output for ideo and photo-taking function.
7．System parameter setting
> Please refer to “TV playback function” chapter, ia AV or HDMI cable, connect to TV, unit
enters into standby mode. Long press enter button“ ”, TV will show system parameter setting
interface. Buttons functions as below:
A、Short press enter button“ ” to select & quit setting items.
B、Short press up button“ ” to upward correct setting item, and short press down button“ ”
to downward correct setting item.
C、Long press enter button“ ” to quite and sa e setting items.
Setting illustration:
>RESOLUTION: 720P30fps、720P60fps、1080P30fps、FULL HD30fps initial setting is 720P
60fps
A、720P30: 1280*720P 30fps,
B、720P60: 1280*720P 60fps, suits for outdoor extreme sports ideo recording. We suggest

you set up frame number as 30fps to achie e clearer and brighter photo quality when indoor
light is dark.
C、1080P30: 1440*1080P 30fps,
D、FULL HD30: 1920*1080P 30pfs, Full HD shooting
Notes:
1) Photo quality and memory capacity consumption depend on ideo resolution, please set up
ideo resolution suitable for en ironment.
2) Please use a brand high-speed (CLASS 4 or abo e) microSD card to achie e better and
more fluent photo quality.
3) When ideo resolution is 1280*720P 60fps, unit will automatic transfer into night mode if unit
records ideo in darker places to achie e brighter picture quality, and at the same time,
frame number will automatic transfer into 30fps.
> QUALITY: H、M、L
Illustration: A high ideo quality setting, higher ideo quality would get, and at the same time
higher memory capacity consumption.
Notes: Please use a brand high-speed (CLASS 4 or abo e) microSD card to achie e better
and more fluent photo quality.
> PHOTO SIZE: 5M、8M、12M
Illustration:
1) 5MP=photo resolution is 2592*1944, 8MP=photo resolution is 3200*2400, 12MP=photo
resolution is 4000*3000.
2) Photo size and memory capacity consumption depend on photo resolution.
> TIME STAMP: DATE/TIME、OFF
Illustration: it is used for opening or closing images watermark markers.
> FLICKER: AUTO、60Hz 、50Hz
Illustration: Setting up light source frequency according to grid frequency to cancel shooting
flashing under the lamp.
> TV TYPE: NTSC、PAL
Illustration: Choose right ideo format both for camera and TV during using TV-OUT function,
otherwise TV will show the inharmonious color problem.
> TIME AND DATE: YEAR.MONTH.DATE HOUR:MINUTE
Illustration: If the time stamp shown on ideos and photos is wrong, please set up correct time
and date through this setting.
Button function:
A、Up button“ ” or down button“ ” used for upward or downward correcting.
B、Enter button“ ” used for sa ing and quitting setting.

> RECORD OVERWRITE: OFF、2MIN、5 MIN、15 MIN
Illustration: Setting up loop recording function:
1. Initial settings is OFF, unit will shut down automatically during shooting when memory is full.
2. After setting up 2MIN、5 MIN、15 MIN, unit will sa e the recording ideo when reaching this
timing length. When TF card is full, unit will delete the former ideos automatically one by one
to acquire rele ant space to store new ideos.
> BEEP SOUND: ON、OFF
Illustration: this function for the purpose of turning on or turning off the button beep sound after
connecting to TV.
> FORMAT: YES、NO
Illustration: Used for resetting microSD card
Notes: After choosing YES, all files in microSD card will be deleted, so please take care this
point.
> AUTO POWER OFF: 1MIN、2MIN、3 MIN、5 MIN、OFF
Illustration: After setting the related auto power off time, the unit would shut down automatically
if there is operation.
Notes: If you set on the “OFF” state, unit would not shut down automatically e en there is not
operation.
>DEFAULT SETTING: YES、NO
Illustration: If you want to reset the system, choose YES, and short press enter button“ ”.
System parameters will return to factory default and unit will restart.
> FIRMWARE VERSION:
Illustration: Use for iewing the software ersion and related information.
8. Reset the system
If the unit couldn’t work well for any reason, please press power button“ ” and light button“ ”
at the same time to reset unit, and unit will shut down. Please turn on unit again to operate
functions.
Notes: After resetting unit, please wait for 3 seconds to operate unit.

SPECIFICATION:
Lens 5 Mega pixel 1/ 2.5” CMOS sensor
Photo Resolution
12M 4000*3000 JPG Approx. 900pcs/4GB
8M 3200*2400 JPG Approx. 1200pcs/4GB
5M 2592*1944 JPG Approx. 1700pcs/4GB
Video Resolution
Video size QUALITY:
H
QUALITY:
M
QUALITY:
L
1920*1080P 30fps
H.264 AVI
Approx.
41 min (4GB)
Approx.
49 min.(4GB)
Approx.
62 min(4GB)
1440*1080P 30fps
H.264 AVI
Approx.
41 min(4GB)
Approx.
49 min.(4GB)
Approx.
62 min(4GB)
1280*720P 60fps
H.264 AVI
Approx.
41 min(4GB)
Approx.
54 min(4GB)
Approx.
82 min(4GB)
1280*720P 30fps
H.264 AVI
Approx.
62 min(4GB)
Approx.
82 min(4GB)
Approx.
123 min(4GB)
Audio recording ADPCM WAV format 48Khz ,Mono approx. 22h/4GB
Lens type F/2.8 f=3mm 120°wide angle
Min. Illumination 1LUX
Single torch function
usage time
Around 10hours
Laser distance 20M(indoor)
Scanning Frequency Auto、60Hz、50Hz
Signal system NTSC、PAL
Vibration hint Support
Battery Capacity 3.7V/ 1000mAh
Power consumption 1.5W
Video time Around 2.5 h (turn off all the LED with 4GB memory)
Supplied Voltage DC5V 1A or abo e
Power charging time Around 3h
USB Jack USB2.0 High Speed
HDMI support
Memory type MicroSD card (TF Card)
SD card capacity 2GB-32GB
Waterproof IPX8 20meters
Weight 86g
Dimension 91(L)*41(H)*36(W) (mm)
OS support Microsoft Windows2000/XP/VISTA/WIN 7/mac10.4 or abo e
Notes: The ideo time related to the memory consumption and ideo situation, the real time
date would be some different with the date we mentioned abo e.