Denver ACT-1302T User manual

ACT-1302T Quick Start Guide
Introduction to Appearance and Keypad
1. Memory card slot
2. Reset
3. USB slot
4. Power button
5. MIC
6. Shutter button
7. Mode Switch
8. Lens
9. LCD Touch Screen
10. Working Indicator Light
11. Indicator Light for charging
12. Wrist strap eyelet
Usage
1. Charge built-in lithium battery
In power-off state, when the camera is connected with computer,
charging begins. At this time, the charger indicator lights and it turns off
when charged full. Generally, it costs 2-4 hours to charge full.
2. Use memory card
1. Follow the instructions carved by slot of the memory card, it is to insert
FT card into the card slot till entirely inserted.
2. To take the FT card out, after gently pressing the end of the memory
card inwards, the card will reject out.
Note: The camera is not equipped with a built-in memory, and thus a
memory card is required.
3. Power On/Off
3.1 Power-on: If to press and hold POWER key for 3 seconds, the
screen starts up and the camera enters startup state.
3.2 Power-off: In idle state of the camera, if to click POWER key, the
camera turns off.
Automatic power-off: When idle time set for the camera reaches, it
automatically turns off to save power. The default time of the
system automatic power-off is 5 minutes;
3.3 Power-off due to low battery: In case of extremely low battery, the
icon “ ”appears on the LCD screen. Please timely
charge the battery. When the icon turns red and flashes, the
camera will automatically power off.
4. Functional mode switchover
The camera is equipped with three modes: capture, video and replay
mode. After power-on, the modes can be switched over with MODE
switch.
5. Indicators
Operation indicator: When the camera works (e.g. recording
video, capturing or automatic screen turn-off),
the operation indicator lights.
Charger indicator: Constant lighting is to remind user that the
camera is being charged.
6. Video recording mode
(With maximum 29 minutes video recording per sequence)
When the mode switch is turned to video mode, press the shutter
button once or click the LCD center once to begin videoing under
previewing state; press the shutter button once again if you want to
stop videoing, and the camera will also stop videoing automatically
when the memory card is full or the power is insufficient during
videoing period:
1 00:12:18: Timer means that videoing can still last for 12
minutes and 18 seconds.
2 : mode icon
represents that the
camera is in videoing and
recording mode at
present.
3 : videoing size clicks this icon and you can choose
720P/VGA.
4 : means that the memory card is inserted at present.
5 : digital zoom icon, click it and enlarge it.
6 : digital zoom icon, click and minify it.
7 : visual shutter, click this icon for taking photos or
recording.
8 : battery icon represents the present power of the battery.
9 : represents digital zoom times.
10 : click this icon to switch to the playback mode.
7. Photo mode
Switch the mode switch into the photo mode, press the shutter
button or click the LCD center once under the previewing state
to take a photo:
1 0/1234: Counter, indicating current number of photos taken
already /number of photos to be taken.
2 : mode icon, indicating that the camera is in photo taking
mode at current.
3 : video size, click this icon to select 1M/3M/5M.
4 : means that the memory is been inserted at present.
5 : digital zoom icon,
click it to enlarge.
6 : digital zoom icon,
click it to minify.
7 : visual shutter, click this icon for taking photos or videoing.
8 : battery icon, indicates the power of the battery at
present.
9 : indicates digital zooming times.
10 : click this icon to switch to the playback mode.
USB Cable
Capture mode: Take pictures.
Video mode: Record video and
driving (5min, 3min and 1min).
Replay mode: Picture and video
file playback.

ACT-1302T Quick Start Guide
8. Vehicle-mounted mode
Turn the mode switch to vehicle-mounted mode, press the shutter
button or click the LCD center once under the preview state to begin
recording, save a segment for recording every 5 minutes, then start to
record the next segment of video. When the storage card is full, the
earliest segment of video will be deleted to release the corresponding
space for continuous recording, and so the cycle.
1 00:12:18 timer, indicating that the camera can still record for
12 minutes and 18 seconds.
2 : mode icon, representing that the camera is in
vehicle-mounted mode at present.
3 : video size, click
this icon to select
1M/3M/5M.
4 : represents that the
memory card is been
inserted at present.
5 : digital zoom icon, click it to enlarge.
6 : digital zoom icon, click it to minify.
7 : visual shutter, click it for taking photos and recording.
8 : battery icon, representing the current power of the
battery.
9 : indicates the digital zooming times.
10 : click this icon to switch into the playback mode.
Note: the screen will be off automatically during recording process in
order to save power; user can press the power button shortly to start
the screen and restore display.
9. Playback mode
9.1 After starting up and entering the previewing state, click the
playback icon ( ) at the lower right corner of the LCD to switch
to the playback mode:
Click
1 : represents that the current file is an AVI video file.
2 : represents that there
is one file in the current
folder/one file in total.
3 : current folder name (such as: I:\DCIM\100MEDIA, I: is the
movable disk of the device).
4 : Means that clicking can select files frontwards.
5 : Means that clicking can select files backwards.
6 : Means that clicking can activate to confirm the deletion
of the current file picture.
7 : Means that clicking can play the current movie clips.
8 : Means that clicking can switch back the previous photo
mode (video mode).
9.2 Movie clips playing
Click to pause playing, click to play quickly, and click
to play slowly.
9.3 File deletion
Click YES to delete the current file immediately, or click NO to cancel
the deletion operation.
ALL RIGHTS RESERVED, COPYRIGHT
DENVER ELECTRONICS A/S
Electric and electronic equipment and included batteries contains
materials, components and substances that can be hazardous to your
health and the environment, if the waste material (discarded electric and
electronic equipment and batteries) is not handled correctly.
Electric and electronic equipment and batteries is marked with the
crossed out trash can symbol, seen below. This symbol signifies that
electric and electronic equipment and batteries should not be disposed
of with other household waste, but should be disposed of separately.
As the end user it is important that you submit your used batteries to the
approriate and designated facility. In this manner you make sure that the
batteries are recycled in accordance with legislature and will not harm
the environment.
All cities have established collection points, where electric and electronic
equipment and batteries can either be submitted free of charge at
recycling stations and other collection sites, or be collected from the
households. Additional information is available at the technical
department of your city.
Imported by:
DENVER ELECTRONICS A/S
Stavneagervej 22
DK-8250 Egaa
Denmark
www.facebook.com/denverelectronics