MR Marine Electronics OCEAN M60 User manual
1. Select a location for the ODU
2. Remove Bottom Screw
3. Mount the ODU
The antenna requires a clear view of
the sk to receive satellite TV, The
fewer obstructions, the better the
s stem will perform
In addition, the antenna should be far
awa from the mast and radar
Remove a hexagon screw at the
bottom of base
Drill the mounting holes and cable
access hole to prepare the site for
installation
4. Mount the IDU
5. Wiring Diagram
Secure the antenna to the mount base
using bolts,spring washers,and the flat
washers,lock nut.
Dr place is required for IDU to be
mounted
Drill the mounting holes prepare the
site for installation.
Remove
6. Turn on s stem
7. One-button to change the target satellite
8. Turn Off S stem
Turn On Power The antenna s stem
will automaticall search and lock onto
the target satellite
Press Function ke can change the
target satellite which ou want in the
list.
Wait for 3 second, the target satellite
will be selected automaticall and
tracked b the antenna.
And it will return to Normal Mode
automaticall at the same time.
Press Power can turn off the s stem
MR Marine Electronics Group
Address: 2 Masse Street Gladesville NSW,Australia
http://www.oceantv.com.au
Tel:61-
428250520
Contact: Mark Rothwell
SATELLITE SELECTION
A: OPTUS C1/D3
B: OPTUS D2
C: INTELSAT 19
