Nail Master JMD-S108 User manual
Nail DrillUser ManualJMD-S108JIMDOA makes you more attractiveNail Master
-1 -NAIL DRILL SYSTEM896745Decrease Speed1On/Off2Forward/Reverse3Increase SpeedSpeed DisplayOEM LogoSpeed UnitMagnetic Bits Holder HolesForward/Reverse Display12345678910111213141314101112Power AdaptorBrushless HandpieceBaseCharger HoleBitsNail Master
SPECLFLCATIONPRECAUTION1.Power: 48W 2.Input Voltage: DC 24-2A 3.Weight:1.2kg4.Dimension:L265*W241XH72mm5.Speed:0-35000RPM-2 -1.Do NOT disassemble the handpiece2.Do NOT drop the handpiece3.Do not work in a humid environment.4.Operating Environment Humidity:30-75%5.Operating Environment Temperature:+10℃~26℃6.Turn off the power when changing the bits7.Make sure the power switch is off before plugging in the power cord to avoid an unexpected injury due to sudden start.
-3-SET AND OPERATION Turn left side clockwise until you hear it click into the place Insert the 3/32＂size bit 12341.Set drill bitsTake out the original bitTurn right side anti-clockwise to lock the bit tightly
-5 -2. Operation Steps:
Table of contents
