v
Notes on using the Navigator
•ntv46’s navigation system is a reference device. It is not
recommended for applications require precision data such as
direction, distance, and geographic location measurements.
•It is recommended to initialize this GPS device in an open area.
Time required for the first initialization depends upon the signal
strength of the satellite and the condition of the weather. The
initialization may take as long as 10 minutes.
•When your navigator is power up for the first time it is
recommended to do so in an open field and remain stationary. It
will take SiGe SE4110L five to ten minutes to initialize depends
on the weather condition. Your navigator does not require
consequent initialization until the build in battery runs out.
•GPS (Global Position System) uses the satellite system of US
DOD. Maintenance of such system by US DOD will effect the
operation of your navigator.
•Signal quality of your navigator device may be degraded during
operation may be effect by wireless communication devices
(such as cell phone, radio, and speed radar etc).
•Based on the safety rule we recommend not using this device
when driving.
•When using your navigator while riding bicycle please secure
the mounting device onto the frame. Also, insert a piece of
rubber within the mounting buckle to prevent slippery.
Warning: make sure your device is securely bucked onto the
mounting bracket. Especially when riding on bumpy surface.
The warranty does not cover any damage caused by dropping
the device onto the ground or any similar instance.
•The navigator’s power switch does not affect the operating
system of the device and will not alter the content of your plug-
in memory card. In case of device crush, it is safe to switch off
the ntv46 and switch it back on again.
•Do not leave your navigator on the dashboard unattended. It
is very dangerous to expose you navigator in a high
temperature environment. Battery may overheated and
damage the device.
