Netcam360 I9812 Product information sheet

Easy User Manual
More information, please visit the online CD information
on the website
http://www.netcam360.com
WIFI Camera
I9812

Products Description
IR-CUT
LENS
CAMERA
MIC
SPEAKER
ANTENNA
POWER SUPPLY
RESET
SD CARD
LAN

Routine Use Way
1.Connected network camera
1).Network camera (IPC) connected to the power supply
2).Please wait after conection the power and IPC will check itself.
2.Install the client software
1). Make sure your phone connected to the Internet( WiFi/3G/4 )
2). Android version of the smartphone, scan two-dimensional code to
download and install the application as shown in picture (1) or login
www.netcam360.com download.
3). Apple users please scan two-dimensional code to download or enter
the Apple store search "netcam" to download and install software.
Picture (3) Picture (4)
4) one key connecting devicemobile phone connect with WIFI; Open
App, click"add device",as shown in picture (3) click"one key connect
device"; enter the WIFI password, the mobile phone alignment
the mic of device, as shown in picture (4) click"start configuration"；
Picture (2)Picture (1)

3. Access to the network camera ID (Android system mobile client
as an example):
1). Running mobile application, click
on“Add device”. Picture (7)
2). Through the LAN and search the
ID number to conect.Picture (8)
Picture (7) Picture (8)
as shown in picture (5) Then you will hear the sound of"code
successed", as shown in picture (6) then click on the ID to confirm
add it, then the WIFI connecting.
Picture (5) Picture (6)

4). By manually entering the network camera device ID, click Finish to
add the camera.Picture(10)
Picture (9)
3). To get the ID number via bar code scanning equipment. Scans the two-
dimensional in the base of the camera code label, complete the camera
added.Picture(9)
Picture (10)