NETGEAR WNDR3700 - RangeMax Dual Band Wireless-N Gigabit Router... User manual

Netgear N600 (WNDR3700)
configuration guide
certified router

RingCentral certified router Netgear N600 (WNDR3700)
Configuring QoS on the
Netgear N600 (WNDR3700)
to Prioritize VoIP Traffic
1. Open your browser and navigate to http://192.168.1.1.
2. Log in to the router. The default username is “admin”.
The default password is “password”.
3. Select the “Advanced” tab.
4. Select “Setup”.
5. Select “QoS Setup”.
Brand: NetGear
Model: N600
Hardware Version: WNDR3700
Firmware Version: V1.0.0.22_1.0.17
2
1
3a
4
5
3b
3

RingCentral certified router Netgear N600 (WNDR3700)
6. Check the box next to “Turn Internet Access QoS On”.
7. Check the box next to “Turn Bandwidth Control On”.
8. Select the “Uplink bandwidth Maximum” radial button.
9. In the field to the right of the radial button enter in your current
upload speed. (If unsure of the current upload speed, run a
speedtest at http://www.ringcentral.com/support/capacity.html).
10. Be sure to save any changes and reboot the router
before proceeding.
11. Your QoS should now be configured.
10
6
7
8
9