NETWORKSOUND Mamba PR8E User manual

48x24x24 Split Mamba Quick Setup Guide
Mon Mix or Recording Mix
Inputs such as
Mic, line etc
Mon
Mix
or
Recording
Mix
Mon Mixing
Micpre outputs to
Input (1
24)
Stage End
Returns from Mon Mix
Mon
.
Mixing
Console (48)
Micpre
outputs
to
Stage box inputs.
Use DB25-TRS
Input
(1
-
24)
Returns to Stage
Returns
from
Mon
Mix
(Output 25-48)
Returns from FoH
(Output 1-24)
FoH End
Standard CAT
-
5toFoH
Standard CAT-5 to Mon
FoH Mixing
FoH port
Mon port
Standard
CAT
-
5
to
FoH
FoH
Mixing
Console (48)
Input (1-24)
Returns to Stage

Setu
p
Instruction
p
• Stage End
– Place PR8E and stage box at Stage end
–
Connect CAT
-
5 as shown in diagram CAT
-
5 to FoH should be connected to FoH/Link 1 on
–
Connect
CAT
-
5
as
shown
in
diagram
.
CAT
-
5
to
FoH
should
be
connected
to
FoH/Link
1
on
Stage Box and CAT-5 to Mon Mix should be Link2 / Mon port.
– Connect DB25 to TRS cables from PR8E outputs (back side) to channel 1-48 Inputs on
stage box
– Connect DB25 to XLR Male from Ch 1-24 output at the stage box for FoH Returns
–
Connect DB25 to XLR Male from
Ch 25
-
48 at the stage box for Mon Mix Returns
–
Connect
DB25
to
XLR
Male
from
Ch
25
-
48
at
the
stage
box
for
Mon
Mix
Returns
– Connect Microphones and other inputs to PR8E inputs (front side – XLR/TRS combo)
– Adjust the gain to have good sound (gain could be low since A/D is done at the Stage end).
Need some fine tuning based on your taste and setup
– Connect power to Stage box and PR8Es. Switch all power ON
FHEd
•
F
o
H
E
n
d
– Place the FoH box near FoH mixer
– Connect CAT-5 from Stage box any port ( Link 1 or link 2)
– Use DB25 to XLR Male cables to connect all 48 outputs from FoH to your FoH mixer
–
Use DB25 to XLR Female to connect 1-24 returns from mixer to FoH in
p
uts 1-24
p
– Connect power cord and power ON
• Mon Mix End
– Place the Mon Mix box near Mon Mix mixer
– Connect CAT-5 from Stage box any port ( Link 1 or link 2)
U DB25 t XLR M l bl t t ll 48 t t f M b t M i
–
U
se
DB25
t
o
XLR
M
a
l
e ca
bl
es
t
o connec
t
a
ll
48
ou
t
pu
t
s
f
rom
M
on
b
ox
t
o your
M
on m
i
xer
– Use DB25 to XLR Female to connect 1-24 returns from mixer to Mon inputs 1-24
– Connect power cord and power ON