nevins 2 Stem User manual

2 STEM
ASSEMBLY INSTRUCTIONS
Sem

2 STEM ASSEMBLY INSTRUCTIONS
2 STEM
COMPONENTS
ITEM NO PART NUMBER DESCRIPTION QTY
1 33 INCH BASE 2 STEM PLANTER BASE 1
2ST-B STEM TYPE “B” 1
3ST-A STEM TYPE “A” 1
4 8 INCH PLANTER 8” BOTTOM MOUNT PLANTER 1
5 10 INCH PLANTER 10” BOTTOM MOUNT PLANTER 1
6 8 INCH PLANTER 8” HANGING PLANTER 3
7 10 INCH PLANTER 10” HANGING PLANTER 1

2 STEM ASSEMBLY INSTRUCTIONS
Secure stems (ST-A) and (ST-B) to the holes in
the base, using the screws provided.
Rotate the stem to the desired angle and hold in
place while tightening the screw from the bottom
with the supplied Allen wrench.
NOTE: It may be easier to place
the base, on wooden blocks,
when installing the stems.

2 STEM ASSEMBLY INSTRUCTIONS
Secure the bottom mount planters
to the top of the stems. Do not over
tighten screws.

2 STEM ASSEMBLY INSTRUCTIONS
Attach the hanging planters onto the stems, using
the image as a guide.
Align the slots on the planter to the hooks on the
stem and push down until the planter is seated with
the hook.
Place the provided liners in the planters and begin
using your new planter system.