Nightlife 22" crowdDJ Kiosk User manual

For more support with installation of this equipment contact Nightlife Technical Support:
AUS: 1800 773 468 | NZL: 0800 111 960 | ASIA-PACIFIC: [phone] | INT: [phone] nightlife.com.au
Installation Guide
22" crowdDJ Kiosk
Tips for choosing a location
1. Is the Kiosk near to and visible from the high trafc
areas of the venue?
2. Is the Kiosk visible from the entrance of the venue?
3. Is the area well lit? Dedicated lighting for the Kiosk
is even better.
4. Are there nearby power points and data outlets for
cabling?
5. Can you hear the music clearly where the Kiosk is?
6. Is there at least 15cm of space on each side of the
Kiosk for access and visibility?
Minimum total space: 668mm(w) x 1083mm(h)
7. Are there nearby TV screens to promote the kiosk?
Recommended locations
• Near queue points or main counters.
• On pillars (ensure people won’t bump into the Kiosk
as they walk past).
• In pool table areas.
• Outside retail changing rooms.
• Near TV’s (with music videos and crowdDJ®
promotions playing on them).
Get the most out of your Kiosk
Placement of the crowdDJ
®
Kiosk is crucial to guest engagement and increased song selections. Here are some suggestions to help make
the most of your Kiosk:
Equipment list
A. 22" Kiosk - 330mm(w) x 530mm(h) x 35mm(d).
B. Wall Bracket - 138mm(w) x 203mm(h) x 45mm(d).
C. Kiosk Bracket - 138mm(w) x 203mm(h) x 45mm(d)
D. 4 x Phillips head screw (M4x12) + Washers
E. Power supply
F. Ethernet cable (WiFi option available).
G. Kiosk Surround - 368mm(w) x 783mm(h) x 5mm(d)
G
D
B
FE
a
C
Minimum space: 15cm on each side - 668mm(w) x 1083mm(h)

For more support with installation of this equipment contact Nightlife Technical Support:
AUS: 1800 773 468 | NZL: 0800 111 960 | ASIA-PACIFIC: [phone] | INT: [phone] nightlife.com.au
Attaching the surround and mounting the Kiosk
Follow these steps to ensure your kiosk & kiosk surround are attached and mounted correctly.
Need assistance?
Our crowdDJ® Kiosks are a great addition to your venue. For any issues or questions about positioning or nding the best location
for your Kiosk, your Customer Service Representative will be available to help.
Set the top of the wall
bracket (B) 1550mm from
the ground.
Mark the holes on the
mounting surface and
install your mounting
screws.
3
Carefully lay your Kiosk (A) face-down on a soft surface
and remove the C-bracket (B) if it's attached. Power and
ethernet cables (E,F) can be connected to the Kiosk if they
aren't already.
1
Place the kiosk bracket (C) into
the slotted holes on the wall
bracket (B).
Place the Kiosk power supply
and any additional cabling into
the space inside the kiosk and
wall brackets.
4
Align the holes of the
Kiosk surround (F) and
Kiosk Bracket (C) with the
mounting holes on the
Kiosk (A).
Put the 4 provided screws
(D) through these holes.
2
Align the holes in both
brackets (B, C) and screw in
the Phillips head screws.
5
Important
Ensure the crowdDJ®Kiosk is
level and straight.
Connect the network and power
into the venue infrastructure.
Contact Nightlife for WiFi
connection.
6
f
B
b
b
D
a
C
a
B
a
c