Niigata seiki DTW-DL01 User manual

NIIGATA SEIKI CO., LTD
Thank you for purchasing Blu toothBOX, DTW-DL01.
Pl as r ad this docum nt thoroughly for prop r op ration and in ord r to g t th gr at st b n fit from th
product.
■OVERVIEW
Wir l ss adapt r for L v lnic (DL-S3 S ri s, DL-m3 S ri s, DL-m3LS, DL-D3,DL-S3L).
※
※※
※ This adapt r r quir s a standard USB Blu tooth Adapt r (Blu tooth 4.0 or hig
This adapt r r quir s a standard USB Blu tooth Adapt r (Blu tooth 4.0 or hig This adapt r r quir s a standard USB Blu tooth Adapt r (Blu tooth 4.0 or hig
This adapt r r quir s a standard USB Blu tooth Adapt r (Blu tooth 4.0 or high r,) purchas d s parat ly.
h r,) purchas d s parat ly.h r,) purchas d s parat ly.
h r,) purchas d s parat ly.
■FEATURES
● Can communicat with wid rang of Blu tooth capabl d vic s.
● Acc pts a standard USB Blu tooth adapt r, availabl worldwid .
■PART IDENTIFICATION
①Pow r ON/OFF Button (R d)
・Wh n status LED is off, a short pr ss will turn ON
pow r.
・Wh n status LED is on, a short pr ss will turn OFF
pow r.
・Hold down th Pairing Button and pr ss Pow r Button
at sam tim to nt r pairing (discov ry) mod .
② USB-A Conn ctor (Blu tooth icon)
Custom r suppli d USB Blu tooth adapt r plugs in h r .
Do not us to conn ct oth r USB d vic s.
※ For full communication distanc capability, th PC's Blu tooth
int rfac must also b Class 1.
③ Data communication conn ctor ("DATA")
Conn cts to th L v lnic with suppli d Mini-plug
Communication Cabl .
④ Pairing Button ("PAIRING")
Hold down th Pairing Button (using a thin tool) and pr ss th Pow r Button at th sam tim to nt r pairing
(discov ry) mod .
⑤ Micro-USB conn ctor ("CHARGE")
Conn cts to th includ d AC-USB charg r and Charging Cabl , or conn ct to PC to charg th d vic .
※ Do not us to conn ct oth r USB d vic s.
⑥ Charging LED (Pow r icon)
LED on wh n charging; go s off wh n compl t .
⑦ Status LED
Pow r ON: LED=R d, communicating: LED=Gr n, Paring: LED=Blinking gr n, Pairing compl t : LED=Blu ,
Voltag low: LED=Blinking r d
■MOUNTING
1. I nstall a standard USB Blu tooth adapt r by plugging it into th USB-A
conn ctor of th adapt r.
2. Mount th wir l ss adapt r onto th L v lnic.
・ For L v lnic S3,
Loos n th batt ry cas knob slightly and slid th Mounting Plat
(mount d on th Wir l ss Adapt r) ov r th scr w as shown at right
(Imag 1).Imag 2 shows th wir l ss adapt r install d on th L v lnic.
· For L v lnic m3,
Loos n th batt ry cas knob slightly and install th m3 Mounting
Brack t and r -tight n th knob.
Slid th Mounting Plat (mount d on th Wir l ss Adapt r) ov r th
Brack t so it go s into th Slott d Hol in th Plat .
※ Slott d Hol can b s n at th top of th Plat in Imag 1.
3. Plug th Min-plug Communication Cabl into th Mini-plug conn ctors at ach nd.
■PAIRING
・ Turn on th communicating PC and nabl th Blu tooth int rfac .
※For a PC which do s not hav a wir l ss int rfac , pl as provid a
standard Blu tooth 3.0 adapt r and conn ct it to th PC.
※Do not install th Blu tooth driv rs that com with th Blu tooth
adapt r, it works with th standard Windows driv rs.
※On th communicating PC, Op n th D vic Manag r Window, and
und r "Blu tooth Radios", confirm that "G n ric Blu tooth Radio",
and "Microsoft Blu tooth Enum rator" ar pr s nt.
※How to chang to th Windows standard driv r
1. Right-click on th "CSR Blu tooth Chip" (th d vic nam may b diff r nt) in D vic Manag r.
2. S l ct "Updat Driv r Softwar "
3. Click "Brows my comput r for driv r softwar "
4. S l ct "L t m pick from a list of d vic driv rs on my comput r"
5. Ch ck th "Show compatibl hardwar " ch ck-box, and s l ct "G n ric Blu tooth Adapt r", th n click "N xt"
・ On th Wir l ss Adapt r, hold down th Pairing Button
and pr ss th Pow r Button to nt r pairing mod .
(Status LED will blink gr n)
・ Hav th communicating PC or Tabl t s arch for availabl
Blu tooth d vic s. (This proc dur vari s d p nding on
th comput r. Pl as r f r to th instruction manual for
th PC.)
・ S l ct "SKDL01" from th d t ct d d vic s and b gin pairing.
※
※※
※ Th paring cod dialogu window will b display d; pl as s l ct "Y s" r gardl ss of numb r shown. (For Windows XP,
Th paring cod dialogu window will b display d; pl as s l ct "Y s" r gardl ss of numb r shown. (For Windows XP, Th paring cod dialogu window will b display d; pl as s l ct "Y s" r gardl ss of numb r shown. (For Windows XP,
Th paring cod dialogu window will b display d; pl as s l ct "Y s" r gardl ss of numb r shown. (For Windows XP,
pl as nt r
pl as nt r pl as nt r
pl as nt r "0000".)
"0000".)"0000".)
"0000".)
(You will b unabl to conn ct if you you s l ct "Th d vic is not displaying a cod ")
(You will b unabl to conn ct if you you s l ct "Th d vic is not displaying a cod ") (You will b unabl to conn ct if you you s l ct "Th d vic is not displaying a cod ")
(You will b unabl to conn ct if you you s l ct "Th d vic is not displaying a cod ")
・Wh n pairing is compl t , th Status LED will b blu .
Blu toothBOX DTW-DL01 Instruction Manual
①
Pow r ON/OFF Button
②
USB
－
A Conn ctor
③
Data Communication Conn.
Charging Cabl Mini-Plug Communication m3 Mounting
④
Pairing Button
⑤
Micro
-
USB Conn ctor
⑥
Charging LED
⑦
StatusLED
Imag 1 Imag 2

■TRANSMITTING DATA
･ Turn on th Comput r and nabl th Blu tooth int rfac .
･Confirm that th d vic is conn ct d. Th Status LED will b blu , and th PC
will list th "SKDL01" on th list of conn ct d d vic s.
※ Th n xt tim it is start d th LED will r main RED.
Wh n using optional "Straightn ss Softwar ", "Flatn ss Softwar ", or "Data
R cording Softwar ", (LEVELOG); in that softwar 's m nu bar s l ct "S tting →
"S l ct LEVELNICs" - Oth r. Also chang th port sp d s tting to
“9600”(※LEVELOG s ttings window shown at right)
・For instructions on how to
us optional softwar , pl as
r f r to th instruction
manual suppli d with th
softwar .
※ For som softwar v rsions,
th r will b an option to
s l ct a conn ction m thod of
"(Wir l ss) Blu toothBOX".
■CHECKING THE COM PORT
・ From th Blu tooth d vic scr n, right click on "SKDL 01" and s l ct prop rti s.
・ Und r th "S rvic s" tab, th COM port is display d.
If th box is not ch ck d, it can not communicat so pl as put a ch ck in th box.
・ Wh n op ning th d vic manag r, two COM ports ar display d as shown b low.
・ Only on of th COM ports can b conn ct d - if you know which is which, us th outgoing port. If you do not know,
try on COM port numb r, th n th oth r.
■AUTO OFF
If inactiv for 20 minut s, th pow r will turn OFF. Pl as pr ss th Pow r Button to turn back ON. If batt ry voltag
drops b low a c rtain l v l, th Status LED will blink R d. As voltag continu s to drop th adapt r will automatically
turn OFF.
■AFTER USE CARE ・ STORAGE
Storag K p in th Storag Cas , in a mod rat t mp ratur s (0°C~40°C) and out of dir ct sunlight.
Batt ry maint nanc If not us d for a long p riod, pl as maintain th batt ry by charging to 50% capacity v ry
thr months.
■Troubl shooting
■Sp cification
Mod l : DTW-DL01
Wir l ss Protocol : Blu tooth 3.0or lat r (SPP profil compatibl )
Input : L v lnic RS-232C signal (propri tary)
Output : SPP profil compliant
Pow r : Lithium Polym r Batt ry (900mAh)
Continuous on tim : 7 hours
charg tim : 120 minut s
Dim nsions : 82(L)×37(W)×24(H)mm
W ight : 80g (Including batt ry)
Packag cont nts : Main unit (×1), Charging Cabl (1m, ×1), Mini-plug Cabl (×1),
m3 Mounting Brack t (×1), Instruction Manual (×1)
■Not s
For b st p rformanc , and in ord r to k p th adapt r in good condition for long s rvic , pl as r ad and follow th s
instructions.
● Avoid using wh r th d vic will b subj ct to th following conditions:
・ Dirty or dusty locations, or xpos d to dir ct sunlight
・ Expos d to acids, alkali solutions, organic solv nts, oils, or wat r.
・ Equipm nt which cr at s sparks or l ctric discharg , or oth r locations which r quir high l ctric shi lding.
・ N ar quipm nt which produc s strong l ctromagn tic fi lds, such as high voltag cabl s, or broadcasting
faciliti s.
● Cl an only with dry cloth slightly moist n d with a mild d t rg nt or alcohol. Do not us any organic solv nts.
● Do not disass mbl or modify.
● Do not s nd data whil charging.
NIIGATA SEIKI CO., LTD
6-15-22, Tsukanom , Sanjo-city, Niigata Pr f. 955-0055 JAPAN
TEL: [phone] FAX: [phone]
URL http://www.niigatas iki.co.jp
Probl m Caus Solution
Will not pair /
conn ct
① A USB Blu tooth adapt r is not
plugg d in.
② Th s ttings on th PC and th
Wir l ss adapt r may not match.
① Pl as install a USB Blu tooth adapt r. (Do not
install th softwar driv rs which com with it)
② Pl as try th following:
・ D l t th d vic "SKDL01" in th PC's Blu tooth
d vic list.
・R mov and r plac th PC USB Blu tooth
adapt r
・ R boot th PC
※ Aft r pairing, pl as try to conn ct again aft r
th blu Status LED go s off.
Data do s not
transmit
① L v lnic data do s not display.
② Blu tooth conn ction rror.
③ Softwar communication rror.
④ COM port is incorr ct.
⑤ Mini-plug Cabl is not push d all th
way into th conn ctors.
① Pl as confirm th stat of th L v lnic and s t to
output data.
② Mak sur th d vic is within Blu tooth rang ,
and r do th pairing if n c ssary.
③ Clos and r start th communication softwar .
Turn th adapt r pow r off and th n on again.
④ Th PC should list two Blu tooth ports, (on
incoming and on outgoing.) Th wrong on may b
chos n, pl as try th oth r on .
⑤ Mak sur th conn ctors ar fully s at d.