Noble Falcon ANC User manual

Instruction Manual
Model：Falcon ANC
FCC Statement
Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions (1)this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.

Thanks for purchasing Nobel Falcon ANC bluetooth 5.2 true wireless earbuds.
Please read carefully the instruction manual before use.
Packing List
Nobel Falcon ANC TWS Earbuds x 1 pair Instruction Manual x 1 Ear tips x 3 pairs Ear-Hook x 3 pairs USB charging cable x 1 Storage bag x1
Product Overview
Multifunction
button (MFB)
Earbuds LED light
Microphone
LED light
Charging port
Charging case

Power On
If there is sufficient charge, take out the earbuds from the charging case, the earbuds will be power on automatically.
The orange & white indicator light will light up for one second.
Before first use, please charge your Noble Falcon ANC TWS Earbuds to make sure there is sufficient charge for pairing and use.
If the earbuds are power off, press both earbuds MFB button lightly to boot up, you will hear a "Power on" voice prompt.
Power O
To turn off the earbuds, long press the MFB button for 5 seconds to hear "dong dong" and release, you will hear a " Power off " voice prompt.
The orange indicator light will light up for one second.
If the charging case has sufficient charge, the earbuds will automatically turn off when placed in the charging case.

How to Pairing Product Overview
Falcon ANC
Tap the MFB button
Mode
MUSIC
Phone
Siri
Volume
Hear through
AMC
Function
Play
Pause
Next Track
Previous Track
Answer Call
Hang Up
Reject Call
Enable
Enable
Enable / Disable
Up +
Down --
Single Tap
Single tap
Triple tap
Long press for 2s to hear
"dong" and release
Long press for 2s to hear
"dong" and release
Long press for 2s to hear
"dong" and release
Long press for 1 second and release
-
-
-
-
-
-
L R
Double Tap
Triple Tap
Single Tap
Single Tap
Double Tap
Method 1
1. Take out the earbuds from the charging case, the earbuds will automatically power on and enter pairing mode with orange and white indicator lights
twinkling alternately.
2. Enable the bluetooth of your phone to search "Falcon ANC" and then click it for pairing, they will be connected.
Method 2
1. When the earbuds are not connected and in standby mode, double-tap the left or right MFB, they will enter pairing mode with orange and white indicator lights
twinkling alternately.
2. Enable the bluetooth of your phone to search "Falcon ANC" and then click it for pairing, it will be connected.
Note: 1. If the earbuds are connected to one device already, put the earbuds into the charging case and take out, the earbuds will connect the device automatically;
If the connection is unsuccessful, the earbuds will go into pairing mode automatically.
2. Disconnect the erabuds from the connected device, the eabuds will go into pairing mode automatically.

Reset
Hear-though function & ANC function
Ensure the charging case has sufficient charge, put your earbuds into the charging case and make sure the orange LED light is on. Then long press the left and right MFB for 10s and release, you
will see the orange light is off and the white light is on; Then take out the earbuds from the charging case, you will notice the white light flashing quickly; Few seconds later, your earbuds will
enter pairing mode with one earbud's white and orange lights flashing alternatively.
(Note: When only one earbud’s white light flash quickly or only one earbud can be connected or the earbuds can not be used normally, you can try this reset method to restore.)
white light flashing orange & white lights twinkling alternately
In standby state/music state:
< Hear-through mode>
When using in binaural mode, long press the right MFB for 2s to hear "dong" and release, you will hear a "Ambient Mode" voice prompt, that means hear-through mode on.
<Active Noise Cancellation (ANC) Mode>
After entering hear-through mode, long press the right MFB again for 2s to hear “ dong”and release, you will hear a "Noise canceling on" voice prompt.
Then press for 2s again to turn off ANC, you will hear a "Noise canceling off" voice prompt.
Switch in the order : Hear-through mode →ANC On→ANC Off.
Note: The noise reduction function (ANC) is only available when both earbuds are used at the same time.
White LED flash quickly →orange & white LED twinkling →reset done
White and orange LED lights flash alternatively
Orange & white LED light on for 1 second
Orange LED light on for 1 second
Orange LED on
Orange LED light flashes twice every second
Orange LED off
The LED Indicator for Falcon ANC

· Disconnect previous devices before pairing a new device.
· WARNING!
Declarations and Warning
Qualcomm aptX Adaptive & Qualcomm aptX
Qualcomm aptX and Qualcomm cVc are products of Qualcomm Technologies, Inc. and/or its subsidiaries.Qualcomm is a trademark of Qualcomm Incorporated, registered in the
United States and other countries. aptX and cVc are trademarks of Qualcomm Technologies International, Ltd., registered in the United States and other countries.
Qualcomm aptX and Qualcomm TrueWireless are products of Qualcomm Technologies, Inc. and/or its subsidiaries.Qualcomm and Qualcomm TrueWireless are trademarks of
Qualcomm Incorporated, registered in the United States and other countries.
All LED On Orange LED Off
Case Charging
Charging ChargingWhite LED ON Orange LED ON
Fully Charged Fully Charged
Earbuds Charging
Battery Indicator：
Charging
• Long-term exposure to high noise volumes may cause permanent hearing loss.
• Do not use the NOBLE Falcon ANC earbuds in locations prohibiting the use of electronic equipment.
• Consult your physician prior to using your NOBLE Falcon ANC earbuds if you have a pacemaker or other electrical medical device.
• This package may contain small parts, which may pose a hazard to small children.
• Do not disassemble the NOBLE Falcon as it contains lithium batteries, and disassembly could result in electric shock or fireor serious injury.
• Any disassembly of the NOBLE Falcon, or attempt to replace or repair the NOBLE Falcon by an unauthorized person, will void the NOBLE
Falcon’s warranty.
• This product is not designed for use in water, keep product away from water and liquids. Failure to do so may cause permanent damage to
the product.