Norcool CAVE CIGAR Product guide

CAVE CIGAR
English
OPERATING &
INSTALLATION
INSTRUCTIONS

2

3
Please visit www.norcool.no for operating &
installation instructions in other languages.

4Shape
CAVE CIGAR

5
Content
CAVE CIGAR
1. Important Information.................................................................................. 6
2. Installation......................................................................................................... 8
3. Operating Instructions ............................................................................... 10
4. Cleaning & maintenance.............................................................................. 11
5. Cigar storage guide..................................................................................... 12
6. Troubleshooting............................................................................................ 13

6
Before first use
• Read and follow all the instructions below even if you feel you are familiar with
the appliance.
• Remove the packing and make sure that the appliance is intact. lf in doubt do
not use the appliance and contact the manufacturer. Do not leave packaging
materials such as bags and staples within reach of children.
• Dispose of packaging carefully and with consideration for the environment.
Safety information & warnings
When using any electrical appliance, basic safety precautions must be
followed in order to reduce the risk of fire, electrical shock and/or injury
to persons or property. Be sure to read all instructions before using this
appliance and observe the following safety tips:
Attention: To prevent the risk of child entrapment, do not allow children
to operate, play with, or crawl inside the unit. lf the unit will not be used
for an extended period of time, remove the door and leave the shelves in
place so that children cannot crawl inside . Also , remove the door when disposing
of the unit.
Children aged from 3 to 8 years are allowed to load and unload refrigerating
appliances.
To avoid contamination of food, please respect the following instructions:
- Opening the door for long periods can cause a significant increase of the tem-
perature in the compartments of the appliance.
- Clean regularly surfaces that can come in contact with food and accessible
drainage systems.
- Clean water tanks if they have not been used for 48 h; flush the water system
connected to a water supply if water has not been drawn for 5 days
- If the refrigerating appliance is left empty for long periods, switch o, defrost,
clean, dry, and leave the door open to prevent mould developing within the
appliance.
This appliance can be used by children aged from 8 years and above and per-
sons with reduced physical, sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or instruction concerning use
of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance.
1. Important Information

7
Shock Hazard - Electrical Grounding Required
This cooler should be properly grounded for your safety. lmproper use of
the grounded plug can result in electrical shock.
lf the power cord appears to be damaged, have it replaced by an authorized ser-
vice center.
Never cut or remove the ground wire from the supplied power cord. Never allow
the product to be connected to an extension cord permanently.
The cord should be secured behind the cooler. Also, to prevent accidental injury,
do not expose or dangle the cord.
Parts list
1. Drawer
2. Hygrometer
3. Door
4. Shelf
Cleaning and user maintenance shall not be made by children without
supervision.
Never clean the appliance parts with flammabie fluids, as the fumes can create
a fire hazard or explosion. Do not store or use gasoline or any other flammable
vapors and liquids near this or any other appliance.
Do not store perishable foods in the cigar cooler, as the interior temperature will
not be low enough to prevent food spoilage.

8
This cooler is a freestanding unit and should not be installed inside a cabinet or
other built-in enclosure.
For proper ventilation, allow 130 mm clearance between the back of the unit and
any adjacent walls.
Before operating your cigar cooler for the first time, follow these steps:
• Before connecting the unit to a power source, allow it to stand upright for
approximately 2 hours. This will reduce the possibility of any system malfunc-
tions which may have occurred from handling during transportation. Clean the
interior surface of the unit with lukewarm water and a soft cloth but do not
get the wood wet.
• Place the cooler on a level surface that will be strong enough to support the
unit when it is fully loaded. To level your cooler, adjust the front feet located at
the bottom of the unit.
• Never place the appliance with the front edge along the edge of a table top or
shelf, because there is a risk of the appliance tipping forwards and falling if the
door compartments is overloaded. Take care to ensure that there is sucient
space in front of the appliance.
• lnstall the cooler away from direct sunlight and heat sources such as stoves,
heaters, or radiators. Direct sunlight may aect the unit’s acrylic coating, and
nearby heat sources can increase electrical consumption. Extreme cold or hot
ambient temperatures may also prevent proper performance.
• Please note: this cooler is only designed for home use, and is not designed to
be placed in a garage, basement, or outdoor area.
Factory odor removal
Wash the interior of the cooler with a mild detergent and warm water. Make sure
to not get the wood wet. Leave the door open and allow it to air dry thoroughly. lf
a “plastic” smell persists, place a dish of baking soda in the unit or stu the cooler
with newspapers overnight. When finished, let the unit run a full day to complete
the airing out process.
Drawer setup
The drawers and shelves included with this cooler are designed to sit flush with
the front edge of the cabinet. This will allow air to circulate freely through the unit.
2. Installation

9
When inserting the drawers and shelves, avoid pushing them all the way against
the rear wall of the cabinet.
Seasoning your cigar cooler
It is best to season your wood shelves and drawers before adding your cigars so
that the wood is at an ideal relative humidity (RH) and does not absorb humidity
from your cigars. To season your new cigar cooler :
1. Add distilled water to the included moisture container or add a sponge that is
damp with distilled water. Make sure that the water is not touching the wood
directly or this may damage the wood.
2. Allow the moisture container, or other humidity-adding device, to sit in the
cooler until it reaches a relative humidity of 5 % higher than your preferred
level. This process may take as lang as 3 days but is the best way to ensure
your cigars stay optimal.
3. Once the cooler reaches this mark, you can begin to add cigars. You may add
a few at a time in order to monitor the RH and make sure it stays at a level you
want it at. lf it drops too much, you can use the same seasoning method to
bring it back up.
During this entire process, it is recommended to not open the door unnecessarily,
as this lets moisture escape and can delay the process.

10 3. Operating instructions
Operating environment
It is recommended to install the cooler in an area where the ambient temperature
is between 18 °C-26 °C. lf the ambient temperature is above or below the recom-
mended ranges, the unit’s performance may be aected, and extreme cold or hot
conditions may cause the interior temperature to fluctuate. This will prevent the
optimal range of 12 °C-23 °C from being reached. In addition, keep in mind that
the temperature may fluctuate depending on whether the interior light is on or o,
and how full the cooler is.
How to use the buttons on the display panel
Raise the desired
temperatures.*
* The interior temperature can be adjusted in increments of 1 degree between
12 °C and 23 °C
After turning on the cigar cooler, the LED display will show the ambient temper-
ature first, and then the set temperature.
Lower the desired
temperatures.*
Turn the light
on or o
Button functions:

11
4. Cleaning & maintenance
Cleaning your cooler
To clean your cooler:
• Unplug the cooler and remove anything inside .
• Remove the shelves and wash the inside of the unit with a solution made of
warm water and baking soda solution (2 tablespoons of baking soda to one
litre of water).
• Unscrew the water reservoir at the bottom of the unit and rinse with water. To
clean the outside of the unit, use a mild detergent and warm water.
Moving your cooler
To move your cooler:
• Remove anything stored inside.
• Securely tape down all loose parts located inside the unit. Turn the leveling
feet up to the base in order to avoid damage. Tape the door shut.
• Be sure the cooler stays in an upright position during transportation.

12 5. Cigar storage guide
The ideal temperature for storing cigars is between 18 °C and 23 °C.
The ideal relative humidity (RH) for storing cigars is between 65 % and 75 % RH. To
properly maintain RH in the Model Cave Cigar, you will need to include a method
of adding humidity. For your convenience, a moisture container is included.
To add humidity to the unit using the included moisture container, simply fill the
container with distilled water or a damp sponge wet with distilled water and place
it back in the unit. Please note this water should be changed after reaching the
desired humidity and refilled when used again.
Keep cigars out of direct sunlight, to avoid exposure to damaging UV rays. It is
recommended to keep cigars in their original boxes and packaging as long as pos-
sible. Keep unwrapped cigars separate in your cooler to avoid unwanted mingling
of flavors.
Check cigars regularly for signs of tobacco beetles and mold, and take preventa-
tive measures if necessary.
Properly stored cigars can improve with age for as long as 5-10 years, and can be
kept even longer in ideal conditions.

13
6. Troubleshooting
Problem Solution
The cooler will not
operate.
Check if using the wrong voltage.
Reset the circuit breaker or check for a broken fuse.
The cooler is not cold
enough.
Lower the temperature of the cooler .
Open the door less frequently.
Make sure the door is closed securely.
Replace the seal on the door.
Make sure there is at least 130 mm clearance
between the back of the unit and any adjacent
walls.
The light does not work. Contact customer support department only.
The cooler vibrates while
operating.
Make sure the unit’s feet are in the proper position
and tightened securely.
The cooler produces a lot
of noise.
Make sure the product is leveled.
Check the fan to make sure there is no debris
or obstruction. If not, contact customer support
department only.

14 Notes:

15
Notes:

Version 2.0 - April 2021
Scandinavian Appliances AS
Postboks 61
1740 Borgenhaugen
Norway
T: [phone]
[e-mail]
Please visit out website for operating & installation
instructions in other languages.
www.norcool.no