North Invent Wave PERFORMANCE Series User manual

Specifications subject to changes without prior notice. The contents of
this page are property of North Invent Norway AS. All rights herein are
reserved to North lnvent Norway AS. This document cannot be
reproduced without the written permission of the company.
Wave PERFORMANCE Monitors (PPCs)
NORTH INVENT
Sørhauggata 128, NO-5527 Haugesund, Norway
Phone: + 47 48 84 02 00
[e-mail] www.northinvent.com
September 2020
Please note that the content of this document is subject to continuous revision.
USER'S MANUAL

Wave PERFORMANCE Monitors (PPCs)
Specifications subject to changes without prior notice. The contents of
this page are property of North Invent Norway AS. All rights herein are
reserved to North lnvent Norway AS. This document cannot be
reproduced without the written permission of the company.
NORTH INVENT
Sørhauggata 128, NO-5527 Haugesund, Norway
Phone: + 47 48 84 02 00
[e-mail] www.northinvent.com
2
Table of Contents
1. Terms and Abbreviations.............................................................................................................. 3
2. Monitor Description...................................................................................................................... 4
3. Product Identification.................................................................................................................... 5
4. Packaging and Delivery ................................................................................................................ 5
5. Mechanical Dimensions................................................................................................................ 5
6. Compass Safe-distance:................................................................................................................. 5
7. Electrical Installation..................................................................................................................... 6
7.1. Pin-Assignments........................................................................................................................ 6
8. Operating Instructions................................................................................................................. 10
9. Technical Specifications ............................................................................................................. 10
10. Troubleshooting....................................................................................................................... 10
11. Cleaning................................................................................................................................... 10
12. Maintenance and Service......................................................................................................... 10
13. Update...................................................................................................................................... 10

Wave PERFORMANCE Monitors (PPCs)
Specifications subject to changes without prior notice. The contents of
this page are property of North Invent Norway AS. All rights herein are
reserved to North lnvent Norway AS. This document cannot be
reproduced without the written permission of the company.
NORTH INVENT
Sørhauggata 128, NO-5527 Haugesund, Norway
Phone: + 47 48 84 02 00
[e-mail] www.northinvent.com
3
Foreword
Thank you for purchasing a North Invent Wave Monitor. Our series of rugged Monitors and Panel PC's are conceived and
built with the greatest care and state of the art electronic and software features. North Invent focuses its full expertise in
offering dedicated display solutions, matching with your highest requirements and use.
Before starting operating the Monitor, we would like to suggest that you carefully read through the present document, as
our aim with this User’s Manuel is to give you the best experience in using your device.
May you have any suggestions for improvements, or any feedbacks about this manual, the Monitor and/or its features, feel
free to contact us. We will be pleased to oblige.
This User’s Manual is for use only with our Wave PERFORMANCE Monitors (Panel-PCs / PPCs / Panel Computers). To
assess which series of Monitor you are in possession of, please check the Serial Number plate at the back of the screen.
May you have a different series of Monitor, please contact us, so to have the proper manual sent to your attention.
1. Terms and Abbreviations
DP DisplayPort
HMI Human- Machine Interface
LCD Liquid Crystal Display
LED Light-Emitting Diode
OSD On-Screen Display
RGB Red-Green-Blue
DIU Display Unit
ELU Electronics Unit

Wave PERFORMANCE Monitors (PPCs)
Specifications subject to changes without prior notice. The contents of
this page are property of North Invent Norway AS. All rights herein are
reserved to North lnvent Norway AS. This document cannot be
reproduced without the written permission of the company.
NORTH INVENT
Sørhauggata 128, NO-5527 Haugesund, Norway
Phone: + 47 48 84 02 00
[e-mail] www.northinvent.com
4
2. Monitor Description
The Wave PERFORMANCE monitors are a series of rugged TFT LCD Display Monitors available in 18,5", 19", 21,5",
24", 27" and 32" display sizes and with Intel Core i3/i5/i7 and Celeron CPUs. All of our Monitors built following a
modular approach and can be console mounted or equipped with stand (hinge).
Each Monitor is constituted by the following set of components:
Display Unit (DIU). Front end of the monitor consisting of the glass (optionally: touch) and displaypanel in the aluminium
frame.
Electronics Unit (ELU). Back end of the monitor consisting mainly of powersupply, motherboard, SSD and memory.
DIU and ELU are modular and easily separable in order to ensure efficient configuration, maintenance and repair.
Optional accessories such as hinge (tiltable stand), panel mounting kits and HMI units (operator panels).
Each Monitor presents the following materials and features:
The Front, Display Frame and Cover are made of Marine Grade Aluminium allowing to reduce weight while eliminating
corrosion problems.
The electronic set of components includes a specifically designed Power Supply, a high quality Display Controller, a
Backlight LED driver and a custom-made Interface Board.
The Wave PERFORMANCE Monitors use identical Power Supply which can be supplied with 90-264 VAC, 18-36 VDC
or as a multipower combination depending on configuration.
Pixel pitch on all displays varies from 0,213 to 0,311 mm both in x and y direction depending on the display size (see data
sheet). Pixel pitch equals 1.07 m viewing distance with a viewing angle of 1 minute of arc as required in IEC 62.288
section 7.5.1 for the 27" monitor, 0.96 m for the 24" monitor, 0.86 m for the 21" monitor, 1.02m for the 19” monitor and
0.74 m for the 18,5" monitor. Nominal viewing distance in a normal environment is 1.0 m.
Each Monitor complies with the following international Standards and Requirements:
All our Monitors has been tested by the Norwegian accredited testing bodies Applica Test Laboratories, and found to
comply with the requirements of the International Association of Classification Societies (IACS) as well as the selected
requirements of IEC 60945, IEC 60533, IEC 60529 and selected MIL standards.
The 19", 21ʺ, 24" and 27" Wave PERFORMANCE monitors are also tested according to IEC 62288, IEC 62388 and IEC
61174 and thereby ECDIS approved.
All our Monitors are approved in compliance with the international standard IEC 60945 : 2002 (Clause 4.4 Equipment
category b, protected from the weather (formerly class B)), Maritime navigation and radio communication equipment and
systems - General requirements - Methods of testing and required test results.

Wave PERFORMANCE Monitors (PPCs)
Specifications subject to changes without prior notice. The contents of
this page are property of North Invent Norway AS. All rights herein are
reserved to North lnvent Norway AS. This document cannot be
reproduced without the written permission of the company.
NORTH INVENT
Sørhauggata 128, NO-5527 Haugesund, Norway
Phone: + 47 48 84 02 00
[e-mail] www.northinvent.com
5
3. Product Identification
On the backside there are three markings identifying the monitor.
Display Unit (DIU) P/N and serial number
Electronics Unit (ELU) P/N and serial number
Complete Monitor P/N and service tag number
Upon request we can assign an additional customer specific P/N.
Please see separate document for details about product numbering.
4. Packaging and Delivery
Please check the delivered goods immediately on receipt with respect to damages caused by transportation and inform the
delivering freight carrier immediately, on site, about any visible transport damages. Additionally, inform us immediately in
writing, at the latest within 5 work days, about any visible transport damages. At reception, the delivery includes the
following items:
Wave PERFORMANCE Monitor
AC power cable
DC power plug (optional)
DP cable (optional)
5. Mechanical Dimensions
For panel cut out drawings and mechanical dimensions of monitors see data sheets.
6. Compass Safe-distance:
Every component of type approved equipment is tested in order to determine the minimum safe distances at which it should
be installed from both the steering and the standard magnetic compasses, so not to significantly affect the accuracy of these
compasses. A safe distance takes into account both the constant effect on a magnetic compass, of the presence of magnetic
material but also any variable effect due, for instance, to electrical circuits or the opening/closing of drawers or panels.
Thus, provided that a Monitor is not placed in a position nearer to the centre of the bowl of a magnetic compass than the
recommended safe distance, the Monitor may be installed or removed without any need for adjustment of that compass.
The safe compass distances are mentioned on every Monitor and / or in the corresponding datasheet.

Wave PERFORMANCE Monitors (PPCs)
Specifications subject to changes without prior notice. The contents of
this page are property of North Invent Norway AS. All rights herein are
reserved to North lnvent Norway AS. This document cannot be
reproduced without the written permission of the company.
NORTH INVENT
Sørhauggata 128, NO-5527 Haugesund, Norway
Phone: + 47 48 84 02 00
[e-mail] www.northinvent.com
6
7. Electrical Installation
All electrical connections are to be found on the lower back side of the Monitor. Necessary electrical indications are to be
found on the Terminal Plate at the bottom of the Monitor’s backside.
Figure: Terminal Plate for a Wave PERFORMANCE Monitor with AC+DC power input and four serial ports. Optionally,
two serial ports can be replaced with two additional Ethernet ports.
7.1. Pin-Assignments
AC Power
Pin
Description
Pin
Description
Pin
Description
N
Neutral
PE
Protective Earth
L
Line
The Monitor is connected to AC voltage by means of the standard AC power cable included in the delivery. The AC
current to the Monitor must be limited by a 3A fuse or similar.
DC Power
Pin
Description
Pin
Description
Pin
Description
1
Supply voltage, positive 18-36V
2
NC
3
Supply voltage negative
The Monitor is connected to DC voltage by means of the DC power plug included in the delivery and wires suitable for up
to 8 A. The Monitor will not be damaged by reversed polarity, may it occur.

Wave PERFORMANCE Monitors (PPCs)
Specifications subject to changes without prior notice. The contents of
this page are property of North Invent Norway AS. All rights herein are
reserved to North lnvent Norway AS. This document cannot be
reproduced without the written permission of the company.
NORTH INVENT
Sørhauggata 128, NO-5527 Haugesund, Norway
Phone: + 47 48 84 02 00
[e-mail] www.northinvent.com
7
Displayport
Pin
Description
Pin
Description
Pin
Description
1
ML_3LN (Lane 3-)
8
GND
15
AUXP (Auxiliary Channel+)
2
GND
9
ML_LN1P (Lane 1+)
16
GND
3
ML_L3P (Lane 3+)
10
ML_LN0N (Lane 0-)
17
AUXN (Auxiliary Channel-)
4
ML_L2N (Lane 2-)
11
GND
18
Hot Plug Detect
5
GND
12
ML_LN0P (Lane 0+)
19
POR (Return for Power)
6
ML_L2P (Lane 2+)
13
Config1 (connected to GND)
20
PO (Power 3.3V / 500mA)
7
ML_L1N (Lane 1-)
14
Config2 (connected to GND)
RS232 –DB9 Plug
Pin
Description
Pin
Description
Pin
Description
1
Not connected
4
Not connected
7
Not connected
2
TxD (Transmit Data)
5
GND
8
Not connected
3
RxD (Receive Data)
6
Not connected
9
Not connected
The Monitor is equipped with a standard 9-pin D-SUB male connector for RS232 remote control. Further information
about this interface and the remote control is to be found in separate document.
RS422 / 485 - DB9 Plug
Pin
Description
Pin
Description
Pin
Description
1
TxD- (Transmit Data)
4
RxD+ (Receive Data)
7
Not connected
2
TxD+ (Transmit Data)
5
GND
8
Not connected
3
RxD- (Receive Data)
6
Not connected
9
Not connected
The Monitor is equipped with a standard 9-pin D-SUB male connector for RS422/485 remote control. Further information
about this interface and the remote control is to be found in separate document.

Wave PERFORMANCE Monitors (PPCs)
Specifications subject to changes without prior notice. The contents of
this page are property of North Invent Norway AS. All rights herein are
reserved to North lnvent Norway AS. This document cannot be
reproduced without the written permission of the company.
NORTH INVENT
Sørhauggata 128, NO-5527 Haugesund, Norway
Phone: + 47 48 84 02 00
[e-mail] www.northinvent.com
8
LAN (RJ45)
Pin
Description
Pin
Description
1
DA+
5
DC-
2
DA-
6
DB-
3
DB+
7
DD+
4
DC+
8
DD-
USB A
Pin
Description
Pin
Description
1
GND
3
Data +
2
Data -
4
Vcc
HMI –DSUB 15
Pin
Description
Pin
Description
Pin
Description
1
Backlight UP key
6
GPI (general purpose input)
11
Speaker line
2
Backlight DOWN key
7
GPO (general purpose output)
12
5 VDC
3
Reset key
8
PLED+ (Power LED anode)
13
PSU A Indicator
4
LED brightness control (PWM)
9
PLED- (Power LED cathode)
14
PSU B Indicator
5
Power key
10
Speaker return
15
GND
Refer towering diagram on next page for recommended used of the HMI port.

Wave PERFORMANCE Monitors (PPCs)
Specifications subject to changes without prior notice. The contents of
this page are property of North Invent Norway AS. All rights herein are
reserved to North lnvent Norway AS. This document cannot be
reproduced without the written permission of the company.
NORTH INVENT
Sørhauggata 128, NO-5527 Haugesund, Norway
Phone: + 47 48 84 02 00
[e-mail] www.northinvent.com
9

Wave PERFORMANCE Monitors (PPCs)
Specifications subject to changes without prior notice. The contents of
this page are property of North Invent Norway AS. All rights herein are
reserved to North lnvent Norway AS. This document cannot be
reproduced without the written permission of the company.
NORTH INVENT
Sørhauggata 128, NO-5527 Haugesund, Norway
Phone: + 47 48 84 02 00
[e-mail] www.northinvent.com
10
8. Operating Instructions
The following instructions assume that the Monitor has been correctly installed and that the commissioning work has been
finalised.
9. Technical Specifications
Please refer to the relevant datasheet for the technical specifications for your product of choice.
10. Troubleshooting
Section to be completed.
11. Cleaning
Dust and dirt which typically accumulates on the front of the Monitor, can easily be removed using a soft cloth moistened
with hot water.
A solvent can also be used but never use any kind of abrasive compound.
Oil and grease can be removed using pure alcohol.
The front glass can be cleaned with any solvent suitable for glass.
12. Maintenance and Service
Wave PERFORMANCE monitors are conceived so to be almost maintenance free.
If the Monitor malfunctions, please check if the problem can be solved with troubleshooting.
If the problem persists, please contact North Invent for service instructions.
Allow app. 1 hour stabilization time before measuring luminance and colors.
13. Update
The technical documentation is subject to change. For an updated version please visit our website www.northinvent.com.
|