Northrop Grumman Sperry Marine Jupiter Specification sheet

Northrop Grumman Sperry Marine B.V. (Representative Office)
Woltmanstr. 1 • D-200 7 • Hamburg, Germany
Tel.: [phone] • Fax: [phone] • E-mail: [e-mail]
léÉê~íáçå=~åÇ=fåëí~ää~íáçå=j~åì~ä
lêáÖáå~ä=açÅìãÉåí~íáçå=L=hÉÉé=Ñçê=cìíìêÉ=oÉÑÉêÉåÅÉ
grmfqbo
cä~íJÖä~ëë= `ä~ëë=^Ò=j~ÖåÉíáÅ=`çãé~ëë
MOMSMJMNOUJMN
MRSMNS=oÉîK=aI=OS=^ìÖ=OMNQ

056016/D JUPITER
© 2014 Northrop Grumman Sperry Marine B.V.
This document and the information herein is the intellectual property of Northrop Grumman
Sperry Marine B.V. [NGSM BV] and it’s associate companies and may not be copied or repro-
duced without the express permission of NGSM BV.
Specifications were correct at time of press but may be varied in accordance with NGSM BV’s
policy of continuous product development.
Any technical content should be verified with NGSM BV.
Sperry Marine, with major engineering and support offices in New Malden, England, and
Hamburg, Germany, is part of the Northrop Grumman Navigation & Maritime Systems Division
N&MSD.
oÉîK a~íÉ oÉã~êâë
D 26 Aug 2014 Amended release; storage and maintenance information added,
spare parts added
C 16 May 2012 Updated release
B 21 Mar 1 7 C. Plath Release
A - C. Plath Initial Release

JUPITER 056016/D
iii
`çåíÉåíë
p~ÑÉíó=fåëíêìÅíáçåë
p~ÑÉíó=kçíáÅÉ=`çåîÉåíáçåë= KKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK î
dÉåÉê~ä=p~ÑÉíó=fåÑçêã~íáçå=Ñçê=íÜÉ=léÉê~íçê=KKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK îá
dÉåÉê~ä=p~ÑÉíó=fåÑçêã~íáçå=Ñçê=pÉêîáÅÉ=mÉêëçååÉä= KKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK îáá
`Ü~éíÉê=NW fåíêçÇìÅíáçå
NKN póëíÉã=fåÑçêã~íáçå KKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK NJN
NKO póëíÉã=lîÉêîáÉï KKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK NJP
NKP qÉÅÜåáÅ~ä=a~í~KKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK NJQ
`Ü~éíÉê=OW j~áåíÉå~åÅÉ
OKN j~áåíÉå~åÅÉ=fåíÉêî~äë KKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK OJN
OKO bñÅÜ~åÖÉ=çÑ=`çãé~ëëKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK OJN
`Ü~éíÉê=PW píçê~ÖÉ
PKN píçê~ÖÉ=çÑ=íÜÉ=`çãé~ëë KKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK PJN
`Ü~éíÉê=QW fåëí~ää~íáçå
QKN fåëí~ää~íáçå=çÑ=íÜÉ=`çãé~ëë KKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK QJN
`Ü~éíÉê=RW pÉêîáÅÉ
RKN dÉåÉê~ä=pÉêîáÅÉ=fåÑçêã~íáçå KKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK RJN
RKO `çãé~ëë=oÉíìêå=fåÑçêã~íáçå KKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK RJO
`Ü~éíÉê=SW grmfqbo=pé~êÉé~êíë
SKN fääìëíê~íÉÇ=m~êíë=iáëí=EfmiF=lîÉêîáÉï KKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK SJN
^ééÉåÇáñ
aê~ïáåÖë=KKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK f

056016/D JUPITER
iv

JUPITER 056016/D
Safety Notice Conventions v
p~ÑÉíó=fåëíêìÅíáçåë
p~ÑÉíó=kçíáÅÉ=`çåîÉåíáçåë
The following safety notice conventions are followed throughout this
manual:
a^kdbo
A a~åÖÉê notice contains an operating or main-
tenance procedure, practice, condition, state-
ment, etc., which, if not strictly observed, ïáää=
êÉëìäí=áå=áåàìêó=çê=ÇÉ~íÜ=çÑ=éÉêëçååÉäK
t^okfkd
A t~êåáåÖ notice contains an operating or
maintenance procedure, practice, condition,
statement, etc., which, if not strictly observed,
ÅçìäÇ=êÉëìäí=áå=áåàìêó=çê=ÇÉ~íÜ=çÑ=éÉêëçååÉäK
`^rqflk
A `~ìíáçå notice contains an operating or main-
tenance procedure, practice, condition, state-
ment, etc., which, if not strictly observed, ÅçìäÇ=
êÉëìäí=áå=Ç~ã~ÖÉ=íçI=çê=ÇÉëíêìÅíáçå=çÑ=ÉèìáéJ
ãÉåíK
kçíÉ
A kçíÉ contains an essential operating or main-
tenance procedure, condition or statement,
which is considered important enough to be
highlighted.
Special safety symbols may be used in this
manual to indicate:
a^kdbo
a~åÖÉêW=oáëâ=çÑ=ÉäÉÅíêáÅ~ä=ëÜçÅâK
`^rqflk
`~ìíáçåW Components are sensitive to electro-
static discharge.

056016/D JUPITER
vi General Safety Information for the Operator
dÉåÉê~ä=p~ÑÉíó=fåÑçêã~íáçå=Ñçê=íÜÉ=léÉê~íçê
`^rqflk
Risk of damage through unauthorized service
The JUPITER magnetic compass is not serviceable in the field.
Defective units must be returned to Sperry Marine for exchange.
kçíÉ
For details of returning a defective compass
see “Compass Return Information” on page 5-2.
kçíÉ
All service work is restricted to authorized service personnel only.
The operator is not allowed to undertake drain-off and refill procedures
of the compass liquid.
kçíÉ
The exchange of an installed JUPITER magnetic compass against a
JUPITER spare magnetic compass is the only maintenance work allowed
for the operator.
The operator is not allowed to undertake drain-off and refill procedures
of the compass liquid.
`^rqflk
Risk of harming classification requirements
The JUPITER magnetic compass is completely equipped with its belong-
ing gimbal ring.
Following classification requirements, compass, gimbal ring and com-
pass card show the same serial no. and must only be operated as an
entity. It is not allowed to operate equipment with different serial no.
`^rqflk
Risk of damage through wrong storage
The UPSIDE DOWN storage position of the JUPITER magnetic compass
in its transport box (storage case) must be kept for damage free storage.
Never place the transport box with the magnetic compass onto its cover
plate, as this will reverse the recommended storage position and damage
the magnetic compass.

JUPITER 056016/D
General Safety Information for Service Personnel vii
dÉåÉê~ä=p~ÑÉíó=fåÑçêã~íáçå=Ñçê=pÉêîáÅÉ=mÉêëçååÉä
`^rqflk
Risk of damage by undertaking non field-serviceable procedures in the
field
The JUPITER magnetic compass is not serviceable in the field. Service
personnel in the field is not allowed to undertake drain-off and refill pro-
cedures of the compass liquid.
Defective units must be returned to Sperry Marine for exchange.
kçíÉ
For details of returning a defective compass
see “Compass Return Information” on page 5-2.
kçíÉ
The exchange of an installed JUPITER magnetic compass against a
JUPITER spare magnetic compass is the only maintenance work allowed
for service personnel in the field.
Service personnel is not allowed to undertake drain-off and refill
procedures of the compass liquid.
`^rqflk
Risk of harming classification requirements
The JUPITER magnetic compass is completely equipped with its
belonging gimbal ring.
Following classification requirements, compass, gimbal ring and com-
pass card show the same serial no. and must only be operated as an
entity. It is not allowed to operate equipment with different serial no.
`^rqflk
Risk of damage through wrong storage
The UPSIDE DOWN storage position of the JUPITER magnetic compass
in its transport box (storage case) must be kept for damage free storage.
Never place the transport box with the magnetic compass onto its cover
plate, as this will reverse the recommended storage position and damage
the magnetic compass.

056016/D JUPITER
viii General Safety Information for Service Person-

grmfqbo MRSMNSLa
póëíÉã=fåÑçêã~íáçå NJN
`Ü~éíÉê=NW fåíêçÇìÅíáçå
NKN póëíÉã=fåÑçêã~íáçå
The JUPITER is a flat glass “class A” magnetic compass for large
vessels with a card diameter of 180 mm.
The JUPITER has been type approved by Germanischer Lloyd (GL),
in accordance with the Marine Equipment Directive (MED) 6/ 8/EC, as
amended, as magnetic compass class A (certificate no. 4 442-10 HH).
The JUPITER T complies with the following specified standards as
magnetic compass:
IMO resolutions A.382 (X), A.6 4 (17),
ISO 106 (1 73), 25862 (200 ),
IEC 60 45 (2002)+ Corr.1.
The Jupiter has also been type approved by the Russian River Register
(RRR) for the purpose of measurement of magnetic course as well as
determination of magnetic bearings and course angles and has been
assigned certificate 06-05-17 4.
Further type approvals for many other countries are available upon
request.
The JUPITER magnetic compass is available in different types as bear-
ing compass, steering compass, reflector compass and overhead com-
pass and may be installed in all Sperry Marine NAVIPOL binnacles.
cáÖìêÉ=NJNW
grmfqbo Åçãé~ëë
ïáíÜ= áãÄ~ä=êáå =~åÇ
äìÄÄÉê=ã~êâ=çå=éêçàÉÅíáçå
çÑ=Åçãé~ëë=Üçìëáå

MRSMNSLa grmfqbo
NJO póëíÉã=fåÑçêã~íáçå
fåíÉåÇÉÇ=rëÉ
The JUPITER magnetic compass displays the magnetic direction and
provides heading information for the maritime navigation of vessels.
Only appropriately trained and educated personnel, familiar with all
mandatory safety and operating procedures, is allowed to operate it.
The direction can be read from the lubber line and floating compass
card.
With his fluxgate (sine/cosine) interface, the JUPITER magnetic compass
also provides direction data which can be addressed via the TMC func-
tion (Transmitting Magnetic Compass) to a Heading Management Sys-
tem (HMS).
kçí=fåíÉåÇÉÇ=rëÉ
Although the JUPITER is a highly accurate magnetic compass for pro-
viding heading information, the operator must not rely on it solely as
the only heading information source. The plausibility of the JUPITER
heading information must always be confirmed against all other availa-
ble aids to navigation.

grmfqbo MRSMNSLa
póëíÉã=lîÉêîáÉï NJP
NKO póëíÉã=lîÉêîáÉï
cáÖìêÉ=NJOW
grmfqbo
kçK aÉëáÖå~íáçå
1Compass card (floating)
2Lubber line
3Bearing ring with projections
4Inner trunnion journal (partly not shown)
5Outer trunnion journal (partly not shown)
6Gimbal ring
6
5
4
2
4
3
1
5

MRSMNSLa grmfqbo
NJQ qÉÅÜåáÅ~ä=a~í~
NKP qÉÅÜåáÅ~ä=a~í~
^ÅÅìê~Åó
accuracy of directional error: ≤ 0.5°
båîáêçåãÉåí~ä=`çåÇáíáçåë
temperature range – 30° C to + 60° C
mçïÉê=pìééäó
fluxgate (sine/cosine)
power requirements
power rating
output voltage
12 V ± 20%
40 mA
± 3.75 VDC
(variable ± 1.5 to ± 4.5 V)
2 channels sine, 2 channels cosine,
1 reference output
aáãÉåëáçåë=~åÇ=tÉáÖÜí
width gimbal ring 355 mm
width bearing ring 261 mm
depth 110 mm
weight 8.75 kg
`çãé~ëë=iáèìáÇ
compass liquid capacity approximately 2 l
léíáçå~ä=ÉèìáéãÉåí píçÅâ=kçK
Sperry Marine fluxgate (sine/cosine) 026026-0000-000
shadow pin 02 255-0000-000
wooden transport box 073007-0000-000
azimuth device PV 24 076 56-0000-000

JUPITER 056016/D
Maintenance Intervals 2-1
`Ü~éíÉê=OW j~áåíÉå~åÅÉ
OKN j~áåíÉå~åÅÉ=fåíÉêî~äë
For the JUPITER magnetic compass no fixed maintenance intervals or
specific maintenance procedures exist.
The exchange of an installed JUPITER magnetic compass against a
JUPITER spare magnetic compass is the only maintenance work
allowed for the operator.
OKO bñÅÜ~åÖÉ=çÑ=`çãé~ëë
The exchange of the installed JUPITER magnetic compass against an
existing spare compass on board may also be performed by the
operator in the field.
qççäë=L=m~êíë=oÉèìáêÉÇ
• Socket spanner, size 17 mm
• Screwdriver with a blade width of approximately 8 mm
• Pair of long-nosed pliers
• JUPITER spare magnetic compass
`^rqflk
Risk of damage through unauthorized service
The JUPITER magnetic compass is not serviceable in the field.
Defective units must be returned to Sperry Marine for exchange.
`^rqflk
Risk of harming classification requirements
The JUPITER magnetic compass is completely equipped with its
belonging gimbal ring.
Following classification requirements, compass, gimbal ring and com-
pass card show the same serial no. and must only be operated as an
entity. It is not allowed to operate equipment with different serial no.
kçíÉ
The exchange of an installed JUPITER magnetic compass against a
JUPITER spare magnetic compass is the only maintenance work allowed
for the operator.
The operator is not allowed to undertake drain-off and refill procedures
of the compass liquid.

056016/D JUPITER
2-2 Exchange of Compass
mêçÅÉÇìêÉ
1. Loosen the lock-nuts (16) and remove the trunnion journals (17, 21)
by turning counterclockwise with a screwdriver.
2. Remove the JUPITER magnetic compass.
3. Install JUPITER spare magnetic compass.
4. Screw in the trunnion journals (17, 21) into the gimbal ring (13) so
that no play exists between compass and gimbal ring and secure
with lock-nuts (16).
5. Use the storage box of the JUPITER spare magnetic compass to pack
and return the exchanged compass to Sperry Marine, see “Compass
Return Information” on page 5-2 for details.
kçíÉ
Trunnion journals for bearing the gimbal ring are to be removed carefully
with a pair of pliers.

JUPITER 056016/D
Storage of the Compass 3-1
`Ü~éíÉê=PW píçê~ÖÉ
PKN píçê~ÖÉ=çÑ=íÜÉ=`çãé~ëë
On delivery, the JUPITER magnetic compass and a JUPITER spare
magnetic compass come in a wooden transport box (storage case)
protecting the compass against damage during transport or storage.
Inside the transport box, the JUPITER magnetic compass is positioned
upside down for damage free storage. It is mandatory to never place the
transport box with the magnetic compass onto its cover plate as this will
reverse the recommended storage position and damage the magnetic
compass, especially during long-lasting storage of a spare magnetic
compass.
`^rqflk
Risk of damage through wrong storage
The UPSIDE DOWN storage position of the JUPITER magnetic compass
in its transport box (storage case) must be kept for damage free storage.
Never place the transport box with the magnetic compass onto its cover
plate, as this will reverse the recommended storage position and damage
the magnetic compass.

056016/D JUPITER
3-2 Storage of the Compass

JUPITER 056016/D
Installation of the Compass 4-1
`Ü~éíÉê=QW fåëí~ää~íáçå
QKN fåëí~ää~íáçå=çÑ=íÜÉ=`çãé~ëë
For the installation of the JUPITER magnetic compass follow the
instructions and information for the respective compass type in the
applicable drawings in the “Appendix”.
Before the installation, it is mandatory to keep to the recommended
storage instructions, see “Storage” on page 3-1 for details.

056016/D JUPITER
4-2 Installation of the Compass

JUPITER 056016/D
General Service Information 5-1
`Ü~éíÉê=RW pÉêîáÅÉ
RKN dÉåÉê~ä=pÉêîáÅÉ=fåÑçêã~íáçå
A defective JUPITER magnetic compass cannot be serviced in the field
and defective units must be returned to Sperry Marine.
The exchange of the installed JUPITER magnetic compass against an
existing spare compass on board may be performed by service
personnel in the field, see “Exchange of Compass” on page 2-1 for
details.
fåÇáÅ~íáçåë=Ñçê=ÇÉÑÉÅíáîÉ=råáí
• Loss of compass fluid
• Discolouration of compass fluid
• Inclined compass card
• any other visible damage
In case of one or more indications for defect found on an installed
JUPITER magnetic compass, the unit must be exchanged.
`^rqflk
Risk of damage by undertaking non field-serviceable procedures in the
field
The JUPITER magnetic compass is not serviceable in the field. Service
personnel in the field is not allowed to undertake drain-off and refill pro-
cedures of the compass liquid.
Defective units must be returned to Sperry Marine for exchange.
`^rqflk
Risk of harming classification requirements
The JUPITER magnetic compass is completely equipped with its belong-
ing gimbal ring.
Following classification requirements, compass, gimbal ring and com-
pass card show the same serial no. and must only be operated as an
entity. It is not allowed to operate equipment with different serial no.

056016/D JUPITER
5-2 Compass Return Information
RKO `çãé~ëë=oÉíìêå=fåÑçêã~íáçå
For returning a defective compass use the following address only:
Northrop Grumman Sperry Marine
Haringsbuisweg 2
3133 KP Vlaardingen / Holland
kçíÉ
Please contact the Sperry Marine Service at [e-mail]
to receive a Return Material Authorization (RMA) number before
returning defective units.
Please address the type no. of the compass and information regarding
probable cause of malfunction when returning a defective compass.
kçíÉ
You can use the Sperry Marine SPEX (Spare Parts Exchange) program to
get a reconditioned item for quick exchange of a defective JUPITER
magnetic compass.