Nugens NuTag LT-A100 User manual

- 1 -
NuTag Air Box Item Tracker
Quick Installation Guide
LT-A100

- 2 -
▼ Disclaimer
- The specifications and information contained in this manual are for
reference only, and the content and information are subject to
change without prior notice.
- If other product or company names appear in the content of the
manual, they are only used to describe the product description, and
there is no intention of infringement.
- Nugens reserves the right to update this disclaimer at any time and
shall not be liable for any damage or compensation caused by issues
beyond our control or improper use.
▼ Warnings and Precautions
- The installation and use of this product must strictly abide by the
electrical safety regulations of the country and the region of use.
- The main body of this product and the remote control have built-in
batteries, please recycle, or scrap them according to national
regulations.
- This product contains small parts. Please do not place it in areas
where children can easily access it.

- 3 -
Rules for Use of Low Power Radio Frequency Devices
According to the regulations set by the National Communications
Commission, for low-power radio frequency (RF) devices that have
obtained inspection certification, companies, businesses, or users
are not allowed to unauthorizedly modify the frequency, increase the
power output, or alter the original design characteristics and
functions. The use of low-power RF devices must not affect aviation
safety or interfere with lawful communication. If interference is
observed, the device should be immediately discontinued, and
measures taken to eliminate the interference before resuming use.
The term "lawful communication" refers to wireless radio
communication conducted in accordance with the provisions of the
Telecommunications Management Act. Low-power RF devices must
tolerate interference from lawful communication or electromagnetic
radiation emitted by industrial, scientific, and medical electrical
equipment.

- 4 -
▼ Instructions
- After taking out the product, install it according to the installation
manual.
- Please keep it away from heat sources and humid environments.
- Product performance may vary in different environments.
▼ Safety Instructions
Before using this product, please read and follow the instructions
below to ensure safe operation.
- Please use batteries that meet the specifications to avoid product
damage.
- Do not attempt to repair or disassemble any component of this
product, as it may damage the product, result in loss of accuracy,
malfunctions, or personal injury, and may also void the product
warranty.
- Before cleaning, please remove the battery and prevent water from
entering the internal body.
- This product does not have real-time precise positioning capabilities
and should not be used as an emergency medical or safety device.
- This product requires a nearby Apple device with the "Find My"
function enabled and Bluetooth signal turned on to be detected. The
product's effectiveness may vary depending on the usage
environment.

- 5 -
Overview

- 6 -
Specifications
Connection
Bluetooth, Find My Network
Device Name
Air Box
Chipset
Apple Encryption Chip
Battery
CR2032 Button Battery
Battery Capacity
210mAh
Product Size
42 x 32.8 x 8.9 mm
Product Weight
11.7g
Product Material
ABS + Aluminum Alloy Battery Cover
Splashproof
IPX-4
Bluetooth
Connection
Effective
Distance
50M, In a barrier-free and distraction-free
environment
(NuTag and mobile phone range)
Long-distance
Bluetooth
Transmission
Apple Find My
Compatible
Devices
iPhone iOS 14.5 or above
iPad OS 14.5 or above
Lost Mode
YES

- 7 -
Function Key
Alert
Startup: Ding sound
Shutdown: Beep sound
Pairing Connected: Silent
Pairing Disconnected: Ding sound
Restore to factory settings: Ding sound
(Short press 4 times, then long press 1
time)
Playing sound (Lost Mode): Continuous
beeping for 15 seconds
Package
Contents
NuTag x 1
Button Battery x 1
Manual x 1
Lanyard x 1
Instructions
Thank you for purchasing the LT-A100 NuTag Air Box Item Tracker.
Before use, please make sure to correctly install the battery into the
battery compartment.
● Open the battery compartment and insert one CR2032 button cell
battery. Ensure that the battery's positive side is facing up.
● Power On/Off:
Press and hold the function key until indicated by a beep sound.

- 8 -
Press and hold the function key for approximately 3 seconds to
power off, indicated by two beep sounds.
● Connecting the NuTag:
Please enable the Bluetooth function on your device and open
the "Find My" application.
In the Find My App, click on the "+" symbol on the right side and
select "Add Other Items" from the list to initiate the search.
● Once the device detects the NuTag, a connection screen will
appear.
Click on "Connect" to proceed to the next step for naming the
item and selecting an emoji.
The diagram provided is for reference only, and the name and
symbol should be defined by the user.
● After clicking "Agree" on the Apple ID connection screen, NuTag

- 9 -
will display its location on the device's map. Once this process is
completed, you can begin using it.
● Clicking on "Play Sound" in the list will emit a beep sound to locate
the tracking tag, and clicking "Stop Sound" will stop the playback.
● Clicking on "Directions" in the list and opening the map application
on the device will navigate to the last known location of the tracking
tag.
● Enabling the "Notify When Left Behind" in the "Notifications"
feature of the list will send a notification when the NuTag is out of
your proximity.
● Enabling the "Notify When Found" in the "Notifications" feature of

- 10 -
the list will send you location update notifications when other devices
detect your tracking tag. This feature only works when the tracking
tag is out of range.
● By enabling the "Lost
Mode," you can enter your
personal phone number and
email for people who find the
tracking tag to contact you.
Activating this mode will lock the tracking tag, preventing it from
being paired with other devices. Enabling this mode will
automatically enable the "Found Notification" in the "Notifications"
feature.
● In the menu, selecting "Remove Item" will
uninstall the NuTag.
Before uninstalling, make sure to deactivate
the "Lost Mode" and place the product
within the device's range for proper
reception.